Tamiya 51470 Maintenance Parts Set for Gear Differential Units

Tamiya 51647 - TRF 420 - Alu Front Direct Cups (2 pcs)

Carson 530935 TT01 bovendek carbon 2mm

Tuning onderdeel voor TT-01: Het hoogwaardige carbon bovendek verfijnt uw TAMIYA TT-01 chassis en geeft het bovendien een hogere stabiliteit. Inclusief bevestigingsmateriaal (schroeven en spacers)
Geschikt voor alle TT-01 chassis

Carson nummer: 530935

Carson 530932 DT03 Versterkte demperbrug voor koolstof 2mm

Tuning onderdeel voor DT-03: Met de carbon veerpoot voor de schokbreker geeft u niet alleen uw TAMIYA DT-03 chassis een hoogwaardigere uitstraling, uw voertuig krijgt ook extra stabiliteit. Inclusief bevestigingsmateriaal (schroeven en spacers)

Compatibel met alle TAMIYA modellen op basis van het DT-03 chassis

Carson nummer: 530932

Carson 530934 DT03 Bescherming achter onderzijde Alu. 2mm

Tuning onderdeel voor DT-03: De aluminium achterbumperbescherming geeft uw TAMIYA DT-03 chassis extra stabiliteit en een nobeler uiterlijk. Montageschroeven inbegrepen

Compatibel met alle TAMIYA modellen op basis van het DT-03 chassis

Carson nummer: 530934

DT03 voorbumper bescherming aluminium 2mm

Tuning onderdeel voor DT-03: De voorbumperbescherming van aluminium vervangt de voorbumperbescherming van plastic en geeft uw TAMIYA DT-03 chassis zo extra stabiliteit en een nobeler uiterlijk. Montagemateriaal inbegrepen (montageschroeven en afstandhouders)

Compatibel met alle TAMIYA modellen op basis van het DT-03 chassis 

Artikelnummer: C530933

TAMIYA 58710 Hotshot II Blockhead Motoren Buggy | RC-Carkit 1:10

Specificaties:

• Lengte: 390mm
• Breedte: 235mm
• Hoogte: 150mm

Technische details:

• Elektromotor type 540
• 4WD cardanaandrijving
• Onafhankelijk
• dubbele draagarmen
• Oliedruk schokdempers
• robuuste behuizing van polycarbonaat
• Velgen met metalen coating (matte afwerking)
• Pin-spike banden
• Kuipframe chassis

Inhoud verpakking TAMIYA Hotshot kit:

• Kit model
• Elektromotor 540
• Bouwhandleiding

U hebt ook nodig voor montage en bediening:

• Afstandsbediening met ontvanger
• Stuurservo
• Snelheidsregelaar
• 7.2V batterij
• Lader
• 4 x AA "Mignon" batterijen voor afstandsbediening

Tamiya 58720 1:10 RC TT-02 Type SRX Chassis Kit

Artikelnummer: 58720
EAN: 4950344587209

Take the TT-02 Racing!!
This variant of the efficient 4WD TT-02 chassis includes a range of option parts, allowing you to compete at the front of the race! Aluminum rear uprights give 3-degree toe-in for more stable cornering, while an aluminum motor mount makes for greater rigidity and enhanced heat dissipation. A highly reliable drivetrain employs full ball bearings, aluminum propeller shaft and center cups, plus metal drive shafts and joint cups. Suspension is fitted with CVA oil dampers and black coil springs; they provide superior cushioning and improved traction. The kit also includes a TT-02 high speed gear set (68T).

Featured Components
- Aluminum Rear Uprights (3-Degree Toe-In)
- Aluminum Motor Mount
- TT-02 Aluminum Propeller Joints
- TT-02 Aluminum Propeller Shaft
- TT-02 Full Ball Bearing Set
- Metal Drive Shafts, Wheel Axles and Gearbox Joints
- 3x18mm Aluminum Turnbuckle Shafts
- 4mm Aluminum Flange Lock Nuts (Blue)
- 5mm Aluminum Short Ball Connector Nuts (Blue)
- 5mm Aluminum Ball Connectors (Blue)
- Medium-Narrow Racing Slick Tires
- 5mm Ball Connectors
- CVA Oil Dampers & Springs

Specifications:
- Length: 376mm, Width: 182mm
- Wheelbase: 257mm　
- Tire Width/Diameter: 24/64mm (Front & Rear)
- Bathtub-type Frame
- Shaft-Driven 4WD
- Front/Rear 4-Bevel Resin Differentials
- 3-Piece Steering Tie-Rod
- 4-Wheel Double Wishbone Suspension
- Front/Rear CVA Oil Dampers
- Includes 68T and 64T spur gears. Combine with separately-sold pinions for Gear Ratio from 9.82:1 to 5.74:1.
- Electronic Speed Controller (ESC) is sold separately.

Separately Required Items
- 2-channel R/C system with ESC, Battery pack and charger, Batteries for transmitter, Type 540 Motor, Body

Tamiya 58717 1:10 RC TT-02BR Chassis Kit Buggy

Artikelnummer: 58717
EAN: 4950344587179

The Tamiya TT-02 and later TT-02B variant (B-standing for buggy off-road kits) chassis are among the most beginner friendly R/C products in our line-up. The TT-02BR chassis is an upgraded version of the TT-02B chassis kit with a wealth of upgraded parts, plus new aluminum propeller joints and carbon fiber damper stays to ensure a wide range of setup adjustments.

Included Hop-up Option Parts:
- NEW-Aluminum propeller joints
- NEW-Carbon fiber damper stays
- Item 22049: XV-02/TT-02 Oil Gear Differential Unit
- Item 54501: TT-02 Aluminum Propeller Shaft
- Item 54768: 06 Module Hard Coated Aluminum Pinion Gear (17T)
- Item 54993: TT-02B/DF-03 Aluminum Damper Set
- Item 53793: DF-02 Two-Way Aluminum Rear Uprights
- Item 54539: TT-02B Full Turnbuckle Set
- Item 53791: DF-02 Assembly Universal Shaft
- Item 53880: Large Dish Wheels (4WD/Front, 62/25)
- Item 53881: Large Dish Wheels (Rear, 62/35)
- Item 54211: TRF201 Rear Wing Set
- Item 54815: TT-02B Reinforced Gear Covers & Lower Suspension Arms (2pcs.)
- Item 54926: TT-02 Lower Deck (Hard/Black)

- 1/10 scale R/C chassis assembly kit.
- Drivetrain uses Item 22049-oil filled gear to adjust the effectiveness of gear differential by using different oil viscosities.
- *Diff. joint cups designed for this chassis kit for improved durability.
- New front and rear damper stays give more set up options of oil dampers and upper arms.
- Using front and rear universal drive shafts ensures stable drivetrain regardless of suspension stroke.
- Propeller shafts have plastic parts at joint sections of aluminum joint cups and shafts to limit wear of joint cups.
- Includes two rear wings - Neo Scorcher kit-standard one (transparent) and Item 54211 (TRF201 Rear Wing Set). Change wing stay when using Item 54211 TRF201 Rear Wing Set.
- Item 54211 includes two wide design wings to adjust downforce depending on running surface condition, and wing stay spacers also included to adjust rear wing angle.
- 4~6mm longer turnbuckle shafts help prevent plastic adjuster sections from deforming to ensure improved suspension movement.
- Steering linkage with flange pipes features improved durability by attachment using hex head screws and lock nuts compared to attachment using 3x18 step screws.
- Features full ball bearings.
- Comes with a carrying case dedicated for the TT-02BR chassis.
- Required to complete: 2-channel radio, steering servo, ESC, 540 motor, off-road tires, 7.2-7.4volt battery with compatible charger, and Tamiya PS paint.
- Includes Neo Scorcher body (transparent). Original Neo Scorcher body stickers not included.

Tamiya 58688 1:10 RC Toyota Land Cruiser LC300 CC-02
 

85013, TS-13 blanke lak 100ml Spray

86045, PS-45 Transparant violet 100ml Spray