Use of the Liquid Mask
Compared to the traditional but now obsolete tape paper, aspects and advantages of our Masking Liquid are easily found:
- incredible time savings, the drawing up of liquid is really fast
- possibility to easily reach every point on the surface of the body, even the edges and areas where the lexan has articulated forms
- less usury of the cutting blade of your precision cutter
- greater cutting precision due to the fact that the liquid, once dried, is semi-transparent and facilitates a lot the possibility to follow the lines of your drawing
- no residue when removing the liquid (it may happen, however, if you continue to use an inadequate tape paper that after the removal of adhesive some glue residues remain on the surface of airbrushing; with Liquid Mask this will never happen)
- greater accuracy of airbrushing, with our liquid the color smear are no longer a problem

Product Features
- the Liquid Mask is is ready to use, you not need to dilute it
- it is water-based withour solvent, not harmful to health. You can safely use it even at home
- dries quickly when subjected to a jet of hot air
- once the package is opened, if stored properly it can last for several months
- with the 16oz format you can prepare about 20 buggy 1/8 bodies and about 12/13 1/10 touring bodies; with the 32oz bottle double quantities

Use of the Liquid Mask
Compared to the traditional but now obsolete tape paper, aspects and advantages of our Masking Liquid are easily found:
- incredible time savings, the drawing up of liquid is really fast
- possibility to easily reach every point on the surface of the body, even the edges and areas where the lexan has articulated forms
- less usury of the cutting blade of your precision cutter
- greater cutting precision due to the fact that the liquid, once dried, is semi-transparent and facilitates a lot the possibility to follow the lines of your drawing
- no residue when removing the liquid (it may happen, however, if you continue to use an inadequate tape paper that after the removal of adhesive some glue residues remain on the surface of airbrushing; with Liquid Mask this will never happen)
- greater accuracy of airbrushing, with our liquid the color smear are no longer a problem

Product Features
- the Liquid Mask is is ready to use, you not need to dilute it
- it is water-based withour solvent, not harmful to health. You can safely use it even at home
- dries quickly when subjected to a jet of hot air
- once the package is opened, if stored properly it can last for several months
- with the 16oz format you can prepare about 20 buggy 1/8 bodies and about 12/13 1/10 touring bodies; with the 32oz bottle double quantities

The LSM19 project express the desire to create something different on the market thanks to some aerodynamic solutions that make the body immediately recognizable due to its futuristic lines and a placement of the cab never seen before in this category.

The unconventional

We like to think differently and adopt aesthetic and aerodynamic solutions that deviate from the "standard", for this reason, inspired by the latest futuristic projects and concepts of the most important car manufacturers we have decided to create a body that encloses these innovative elements.

The forward placement of the cab is the element that identifies the design, giving the body not only a scenic and aesthetic detail different from the usual but also reflects on the performance on the track.

Developed for pure performance

During the design stage, the attention was focused not only on aesthetics but especially on the surfaces and forms designed to obtain the best possible performance.

The design has been adapted to meet the specs of the 1/12 Pan-car class, the introduction of a generous front split and the advanced cab increase the steering and the closing of the model close to the slow turns, the two side bulkheads placed in the mid body contain the air flow that flows more to the rear increasing stability and balancing the body as a whole.

Features:

The body it's UNIVERSAL and fit all the 1/12 Pan-car chassis on the market; it respect all the international specs of the category and it's Efra approved.

• Made with high quality and genuine polycarbonate Lexan®
• Produced in Light Weight version as well Ultra Lite (ULT)
• Sold clear with protective film outside
• Included in the package a decal sheet pre-cut and windows mask

Bittydesign M410 190mm TC Body 

Bittydesign Magnetic Body Post Marker Kit - BLUE

Bittydesign Magnetic Body Post Marker Kit - Color : Black - BDBPMK10-B

Bittydesign Magnetic Body Post Marker Kit - Color : Orange - BDBPMK10-O

Bittydesign Marker Pen Permanent for RC bodies and most surfaces

Bittydesign P-G3TR 1/10 GT clear body 190mm

De Bittydesign P10R 1/10 190mm Rally body is een hoogwaardige body van Italiaanse makelij, speciaal ontworpen voor 1/10 Rally modelauto's.
Met een breedte van 190mm en een wielbasis van 257mm past deze body op alle 1/10 190mm modellen.
De P10R body staat voor hoge kwaliteit zonder compromissen, gekoppeld aan meer dan 17 jaar ervaring van Bittydesign in ontwerp en rendering.

• 100% gemaakt in Italië
• Ontworpen voor 1/10 Rally modelauto's
• Breedte body: 190mm
• Wielbasis: 257mm
• Hoge kwaliteit, echt polycarbonaat Lexan®
• Universele pasvorm voor alle 1/10 190mm modellen, inclusief "Touring" chassis en specifieke Rally chassis
• Compatibel met Tamiya TT-02 chassis (alle varianten)
• Ongeschilderd geleverd.

Bittydesign Rear Hard wing 190mm - Modified spec [Universal]

Bittydesign Rear Hard wing 190mm - Stock spec [Universal]

Bittydesign Robox 1/12 Pan-Car Body Ultra Lite Weight

This project was born from the desire to offer to the enthusiast a body shell that could best combine maximum performance together with an all new style never seen before in this class.

The ROBOX body represents the best result of performance and aesthetics into the same product, a true eye-catching.

Premium Quality first of all

Our philosophy leads us not to settle for mediocrity or speculation, for each project we always pursue the same common thread: the best or nothing. To obtain products that fully meet our expectations, we dedicate months of virtual design and rendering in order to allow us to evaluate any improvements or details to be corrected.

QUALITY without any compromise is the basis of everything we make, the ROBOX body shell represents the perfect implementation of our philosophy that drives us to do better and that encourages us to make use of our know-how acquired in over 15 years of experience.

Bittydesign Engineering is synonymous with guarantee, authenticity and innovation.

Made with one target: the excellence

Making reference to a real LM race car, we took inspiration to design the lines of the ROBOX body shell adapted to the production needs, the phase of refinement took several months to optimize every detail, the search of perfection has been obsessive in order to offer a product that respect our quality standards.

ROBOX is a 1/12 Pan-Car body with a breathtaking look, the front nose so lowered with a new style never seen before generates an excellent cornering entry, the lowered cabin and the sides with a modern and futuristic design are part of the design phase during which we reasoned in an innovative way and that led us to create a product outside the box.

3D Cad design & engineering

In order to respect our quality standards, we have not set any limits and we have realized the ROBOX  project with the use of the most advanced graphics and Cad design; this process guarantees a perfect execution of the forms and details that high-tech machinery realize with 5-axis CNC milling machines.

The product we deliver in the hands of the enthusiast represents the best available on the market today, we exploit and make full use of the most advanced technology to guarantee a result that represents at best the Italian excellence.

Features:

• Made with high quality and genuine polycarbonate Lexan®
• Produced in Light Weight version, thickness of material 0,75mm
• Produced in Ultra Lite Weight version, thickness of material 0,75mm but thermoformed with Ultra Lite Technology (ULT)
• Sold clear with protective film outside
• Included in the package a decal sheet pre-cut and windows mask

BITTYDESIGN ROBOX CLEAR BODY 1/12 PAN-CAR LIGHT WEIGHT

Bittydesign Seven65 1/8 GT clear body 325mm (LW | 1.0mm)

Bittydesign STRAIGHT Polycarbonate Scissors

The body Marker Kit it's a very usefull accessory that allow you to mark perfectly the lower cutting line of your On-road body shell, in particular Touring 1/10 and Pan-car 1/12.

The kit is made up of an ergal pen holder that depending on the position where you use it varies the floor height of the blade tip from 6mm up to 9mm.

In the video is illustrated the simple use of the kit, once inserted the marker in its place just enough to drag it to the bottom of the bodyshell to get a perfect cut mark that remains constant (from 6 to 9mm) across the perimeter.

Bittydesign Touring Car body front Foam Pads Kit

Bittydesign TYPE-6C 1/10 Formula Body

Bittydesign TYPE-6R F1 Clear Body