There are no products in your shopping cart yet.
ABSIMA
Loading...
1:10 ABSIMA EP Desert Buggy "ADB 1.4" 4WD green RTR
€ 214,95
- 4WD all-wheel drive
- 2.4GHz remote control
- Extremely durable composite plastic parts
- Fully adjustable suspension
- Ball bearing drive
- Adjustable 16mm Big Bore shocks
- Steel differential outputs
- 5mm aluminum motor mount
- 5mm aluminum shock towers
- Aluminum driveshaft
- 2 cone differentials (front/rear)
- LED light bar front and rear
- Extremely detailed body with add-on parts
- Vehicle can be powered by 2-cell LiPo batteries (up to 30C)
- Scale: 1:10
- Dimensions (L/W/H): 500x270x165 mm
- Weight: 2060g
- Wheelbase: 290mm
- Ground clearance: approx. 45mm
- Track width: 215mm front / 210mm rear
- Tires front/rear Ø: 110mm / Width: 45mm
- Damper oil: 400CPS
- Damper installation length: 80mm
- Motor ratio brushed version: Pinion: 21Z / Main gear: 77Z (48dp)
- Dessert Buggy "ADB1.4" Brushed Version
- 2.4GHz Remote Control CR2SV2
- Mini tool kit
- Instruction manual
3-Channel Radio "CR3P" 2.4GHz incl. 2 Receiver
€ 79,99
SPECIAL COMBO: Including 2 receivers!!!
CPU Radios are every rc car or boat drivers dream! But whats your dream of? It's as much fuctions as possible, big display, stable transmission, nice design - but for an reasonable price! Here we go! Absima's CR3P!
Radio features:
- A.F.H.D.S. 2.4Ghz system
- 3-channel radio
- 2x 3-channel receiver
- 10 model memories
- Servo reverse
- Dual rate
- EPA
- EXP
- ABS
We putted the steering wheel in an outstanding position to keep handling as comfortable as possible. Additionaly the trim levers position allows to set, without leaving the model unattended.
Receiver specification:
- 3-channel
- Water-resistant
- Failsave included
- Measurement:
- 35 x 21 x 12mm
- Weight: 11g
1:10 ABSIMA EP Desert Buggy "ADB 1.4" orange 4WD RTR
€ 199,99
- 4WD all-wheel drive
- 2.4GHz remote control
- Extremely durable composite plastic parts
- Fully adjustable suspension
- Ball bearing drive
- Adjustable 16mm Big Bore shocks
- Steel differential outputs
- 5mm aluminum motor mount
- 5mm aluminum shock towers
- Aluminum driveshaft
- 2 cone differentials (front/rear)
- LED light bar front and rear
- Extremely detailed body with add-on parts
- Vehicle can be powered by 2-cell LiPo batteries (up to 30C)
- Scale: 1:10
- Dimensions (L/W/H): 500x270x165 mm
- Weight: 2060g
- Wheelbase: 290mm
- Ground clearance: approx. 45mm
- Track width: 215mm front / 210mm rear
- Tires front/rear Ø: 110mm / Width: 45mm
- Damper oil: 400CPS
- Damper installation length: 80mm
- Motor ratio brushed version: Pinion: 21Z / Main gear: 77Z (48dp)
- Dessert Buggy "ADB1.4" Brushed Version
- 2.4GHz Remote Control CR2SV2
- Mini tool kit
- Instruction manual
2.4GHz 6-Channel Radio "CR6S" including Receiver with Mixed Mode for RC Cars, Boats and Tanks
€ 59,95
Extra delivery time
2.4GHz 6-Channel Radio "CR6S" including Receiver with Mixed Mode for RC Cars, Boats and Tanks
€ 59,95
FEATURES:
-
2.4GHz FHSS technology, 6 channels frequency-hopping spread spectrum, highly resistant to anti-jamming.
-
Receiver response time is 3ms, ensuring a fast response and better control.
-
Smooth and highly sensitive to control inputs and stable at distances up to 200m
-
Compatible with a variety of vehicles; suitalbe for RC cars, RC boats and RC tanks...etc.
-
With brake and fail safe "out of control" protection function.
-
Each 3 channels can be set respectively, supporting mixed control for 1 and 2 channels.
-
Voltage range of transmitter: 4.8V - 12V (support 1s-3s battery), automatic identification of voltage, low voltage warning on 7.4V/4.8V
-
Voltage range of receiver: 3.3V-10V, working current 30mA, supports high voltage servo.
-
Unique throttle speed limit adjustment function, allows beginners to practive at a safe speed.
-
Channel 4 with winch function ( I - 0 - II )
-
Channel 5 and 6 press for lock and press for release, servo function specially for Crawler accessories.
-
Foam wheel for a good grip
-
Channel: 6CH
-
Radio size (L/W/H): 160x100x200mm
-
Water-proof receiver
-
Receiver size (L/W/H): 35x20x13mm
-
Radio operating current: 80-120mA
-
Receiver operating current: 30mA
-
Radio voltage range: 4.8-12V (LiPo suitable)
-
Receiver voltage range: 3.3-10V
-
Stable distance control up to 200m
-
CR6S 6-Channel Radio
-
R6WP 6-Channel Receiver
-
Manual (DE/EN/FR)
ABSIMA 1:10 EP Monster Truck "AMT3.4" 4WD - 12224
€ 159,95
Fast and powerful, the new Hotshot 3.4 series is equipped with a powerful brushed electric motor, with heat sink, and waterproof electronic speed controller (ESC). Ready to run out of the box (EU & UK version only). Shaft driven 4WD provides you with the necessary traction to maneuver the toughest obstacles and the forward/reverse ESC is beneficial in navigating tight spots. Lightweight plastic chassis, four oil filled adjustable coil over shocks, and independent suspension offer rock solid performance. Fear not! A 2.4GHz radio system and waterproof electronics ensure control, for those who dare to unleash the power.
HIGHLIGHTS
- 40A Brushed Waterproof Speed Controller
- Powerfull 18T 550 Motor
- 2.4GHz Radio System
PRODUCT FEATURES
- Waterproof 40A brushed ESC
-
Select between NiMH and LiPo battery
- Ball bearing transmission
- 8 pcs. Oil filled adjustable shocks
- Gear differential front/rear
- Aluminum motor mount
- Complete covered transmission
- Adjustable turnbuckles & wishbones
- Motor heat sink
- Aero disc racing wheels
- Full printed body
- 2.4GHz radio System
- Sticker sheet for a unique design
- Performance hop ups available!
TECH SPECS
- Motor Type: 18T 550 Brushed Motor
- Transmission: Forward, Brake & Reverse
- Drive System: 4 Wheel Drive
- Wheelbase: 270mm
- Ground Clearance: 55mm
- Measure (L/W/H): 425x300x200 mm
- Weight: 1850g
- Tire width: 57 mm front / 57 mm rear
- Tire Ø ± 116 mm
- Shock spring force: medium / Length: 95mm f/r
- Shock oil viscosity: 400 f/r
- Motor transmission: Pinion 17T / Gear 64T
- Pinion module: 0.6
MORE FEATURES:
- Speed Controller (2100002): NiMH (7.2V) & LiPo (7.4V/2S) suitable / Amps: 40A / BEC 5V/2A / Drive function: forwards/brake/reverse / Plug system: Tamiya
- Servo (2030003): 4kg steering force / 25T outdrive
- Motor (1230361): 18T / 28.000RPM / 12A / Size: 550
- Radio (2000001): 2-channel radio / 3-channel receiver / reverse / dual rate / trimming
SCOPE OF DELIVERY
- Monster Truck "AMT3.4" RTR - brushed version
- 2.4GHz Radio System
- Manual
- Sticker Sheet
REQUIRED ACCESSORIES
- Battery - Racing Pack NiMH or LiPo (up to 30C)
- Charger
- 4x AA Mignon Batteries for Radio
ABSIMA 1:10 EP Truggy "AT3.4" 4WD - 12223
€ 149,95
Fast and powerful, the new Hotshot 3.4 series is equipped with a powerful brushed electric motor, with heat sink, and waterproof electronic speed controller (ESC). Ready to run out of the box (EU & UK version including plug charger and battery). Shaft driven 4WD provides you with the necessary traction to maneuver the toughest obstacles and the forward/reverse ESC is beneficial in navigating tight spots. Lightweight plastic chassis, four oil filled adjustable coil over shocks, and independent suspension offer rock solid performance. Fear not! A 2.4GHz radio system and waterproof electronics ensure control, for those who dare to unleash the power.
HIGHLIGHTS
- 40A Brushed Waterproof Speed Controller
- Powerfull 15T Motor with 32.000RPM
- 2.4GHz Radio System
PRODUCT FEATURES
- Waterproof 40A brushed ESC
-
Select between NiMH and LiPo battery
- Ball bearing transmission
- Oil filled adjustable shocks
- Gear differential front/rear
- Aluminum motor mount
- Complete covered transmission
- Adjustable turnbuckles & wishbones
- Motor heat sink
- Aero disc racing wheels
- Full printed body
- 2.4GHz radio System
- Sticker sheet for a unique design
- Performance hop ups available!
TECH SPECS
- Motor Type: 15T 540 Brushed Motor
- Transmission: Forward, Brake & Reverse
- Drive System: 4 Wheel Drive
- Wheelbase: 270mm
- Ground Clearance: 40mm
- Measure (L/W/H): 405x325x165 mm
- Weight: 1375g
- Tire width: 55 mm front / 55 mm rear
- Tire Ø ± 105 mm
- Shock spring force: medium / Length: 85mm f/r
- Differential oil viscosity: 3.000 front /1.000 rear
- Shock oil viscosity: 400 f/r
- Motor transmission: Pinion 18T / Gear 64T
- Pinion module: 0.6
MORE FEATURES:
- Speed Controller (2100002): NiMH (7.2V) & LiPo (7.4V/2S) suitable / Amps: 40A / BEC 5V/2A / Drive function: forwards/brake/reverse / Plug system: Tamiya
- Servo (2030003): 4kg steering force / 25T outdrive
- Motor (1230360): 15T / 32.000RPM / 16A / Size: 540
- Radio (2000001): 2-channel radio / 3-channel receiver / reverse / dual rate / trimming
SCOPE OF DELIVERY
- Truggy "AT3.4" RTR - brushed version
- 2.4GHz Radio System
- Manual
- Sticker Sheet
REQUIRED ACCESSORIES
- Battery - Racing Pack NiMH or LiPo (up to 30C)
- Charger
- 4x AA Mignon Batteries for Radio
ABSIMA 2-Channel Radio "CR2S.V2" 2.4GHz incl. Receiver - 2000001
€ 39,99
Absima's CR2S V.2 is the perfect choice for hobby level rc drivers. No matter if car or boat! The A.F.H.D.S. 2,4Ghz System secures reliable transmission and range. Made for pure driving pleasure!
Radio Specification:
- A.F.H.D.S. 2.4Ghz system
- 2-channel radio
- 3-channel receiver with "failsafe" function
- "Servo reverse" function
- "Dual rate" funtion
- Ergonomic grip
- Steering wheel with rubber foam
- Internal antenna
- 3-channel
- Measurement: 35 x 21 x 12mm
- Weight: 10g
- Failsafe function included