There are no products in your shopping cart yet.
Chargers
Loading...
2S-Charging Wire - 35cm - XT60 XH | 4/5mm 2mm NOSRAM
2S-Charging Wire - 35cm - XT60 XH | 4/5mm 2mm
ABSIMA Charger "CUBE 2.0" NiMH/LiPo - 4000033
- Input voltage: 100-240V AC
- Charging current: 1.0A / 3.0A / 5.0A (50W)
- Charging output: 4mm sockets
- LED for battery type identification and status
- LiPo/LiFe batteries: 2-3S
- NiMH/NiCd: 1-8 cells
- Balancing current: 350mAh
- Delta-peak sensitive
- Internal power suply
- Dimmension: 110x109x49 mm
- Weight: 490 g

SCOPE OF DELIVERY:
- Cube 2.0 Charger
- AC power cable
- LiPo/LiFe balancing board
- Charging cable with T-plug
- Charging cable with Tamiya plug
- Manual
BALANCE KABEL SET VOOR 2/3/4/5/6S ACCU'S JST-XH
BALANCE KABEL SET VOOR 2/3/4/5/6S ACCU'S JST-XH
Set of 5 long balance wires for BAT-SAFE boxes with JST-XH headers. 2S wire,3S,4S,5S and 6S wire each in this set. 30cm in total.
charge lead with dummy-glow plug style connector, to use for glow-heater.
charge lead with dummy-glow plug style connector, to use for glow-heater.
CHARGE LEAD XH2S BALANCE PORT-BLUE-1PC
2S Lipo charge lead with 4mm charger input plugs and 4-5mm battery plugs, including 2mm balance plug. 600mm. Extremely versatile, suits a wide range of chargers!
CHARGE LEAD XH2S BALANCE PORT-ORANGE-1PC
2S Lipo charge lead with 4mm charger input plugs and 4-5mm battery plugs, including 2mm balance plug. 600mm. Extremely versatile, suits a wide range of chargers!
CHARGE LEAD XH2S BALANCE PORT-WHITE-1PC
2S Lipo charge lead with 4mm charger input plugs and 4-5mm battery plugs, including 2mm balance plug. 600mm. Extremely versatile, suits a wide range of chargers!
CHARGE LEADS - FUTABA RX
Great charging lead for charging receiver and transmitter packs. 4mm input connectors and Futaba output.
CHARGE LEADS 2 X 2S - BLACK
- An extremely useful charge lead which can charge and balance two 2S Lipo's simultaneously and acts as 4S charge leads. - Available in 4 colours, Black, Blue, Red and Orange. - 10 AWG wire - 600mm in length - Balance wire 22AWG 4S/5pin XH on charger side - Nylon covering and extremely well made -
CHARGE LEADS XH2S BALANCE BLACK - SHORT
Charge Leads XH2S Balance Black - Short 2S Lipo charge lead with 4mm charger input plugs and 4-5mm battery plugs, including 2mm balance plug. 300mm. Extremely versatile, suits a wide range of chargers
CHARGE LEADS XT60-XH2S BALANCE PORT - SHORT
Charge Leads XT60 to XH2S Balance Black - Short 2S Lipo charge lead with XT60 charger input plug and 4-5mm battery plugs, including 2mm balance plug. 300mm. Extremely versatile, suits a wide range of chargers!
Charge Leads XT90 - XH2S Balance - Long
Charge Leads XT90 - XH2S Balance - Long
2S Lipo charge lead with XT90 charger input plug and 4-5mm battery plugs, including 2mm balance plug.600mm.
Extremely versatile, suits a wide range of chargers including the new version of Ichargers.
Charge Leads XT90 - XH2S Balance - Short
Charge Leads XT90 - XH2S Balance - Short
2S Lipo charge lead with XT90 charger input plug and 4-5mm battery plugs, including 2mm balance plug.300mm.
Extremely versatile, suits a wide range of chargers including the new version of Ichargers.
Charger, AC, 2 amp NiMH peak detecting (5-7 cell, 6.0-8.4
Charger, AC, 2 amp NiMH peak detecting (5-7 cell, 6.0-8.4
Charging Cable XT60 - XT90/XT60/T-plug/Tamiya/FUT/JR
Charging Cable XT60 - XT90/XT60/T-plug/Tamiya/FUT/JR
Features:XT60 to XT60 , XT90, T-Plug, FUT/JR, Tamiya connector.
Suitable for all common chargers
Cable length 300 mm
Cable type: 14AWG (XT60 charger connection) / 16AWG (battery connection) / AWG22 /JR connection)
Scope of delivery:
1 pcs. multi charging cable