1/12 Rear 32Sh T Foam - 46mm

1/12 Rear 32Sh T Foam - 46mm

Our Multiple European Championship winning Contact RC 'T' foam is now available in a softer shore rating of 32.

The 32 shore version will be a good option on lower grip tracks or club races on non-permanent tracks.

T foam is the most complete 1/12th tyre in the Contact RC range. It benefits from performance and lap times equal or better than Q foam, with the added benefit of being easier to drive, less twitchy and easy to attack the track with. This often leads to improved lap times. It also has much better durability, lower wear rates (close to A foam) and when using the non-oil type additives, keeps grip to the end of the race much better than our other options.

Available in standard 3 bolt rear, 12mm hex fitting rear and standard bearing fit 1/12th/GT12 front.

1/8in Chrome Steel Ball -At,Ecl,Icon/2 - pk12

1/8in Chrome Steel Ball -At,Ecl,Icon/2 - pk12

Ball Sockets Low Profile -Eclipse,PC,A3 - pk4

Ball Sockets Low Profile -Eclipse,PC,A3 - pk4

C/F Wide Camber Strap 1.5deg 4 Dot - Eclipse 6

C/F Wide Camber Strap 1.5deg 4 Dot - Eclipse 6

C/F Wide Track Front Beam - Eclipse 6

C/F Wide Track Front Beam - Eclipse 6

Ceramic Bearing 1/4 x 3/8 x 1/8 Flanged (pr)

Ceramic Bearing 1/4 x 3/8 x 1/8 Flanged (pr)

Schumacher Bearing Guidlines

Yellow = ABEC5, oil filled, shielded, steel balls recommended for relatively clean conditions. Schumacher On Road cars kit specification.
Red = ABEC5, grease filled, double rubber seals, steel balls recommended for wet or dirty conditions. Schumacher Off Road cars kit specification.
Orange or Grey = ABEC 5, oil filled, shielded, extra hard ceramic balls for higher efficiency. Recommended for On Road.
Black = Pro High Precision German or Japanese manufactured, rubber seal. Recommended for Off Road.
Metal = Pro High Precision German or Japanese manufactured, shielded. Recommended for On Road.

CORE RC - Spur Gear 66T - 48DP

CORE RC - Spur Gear 66T - 48DP

CORE RC - Spur Gear 76T - 64DP

CORE RC - Spur Gear 76T - 64DP

CORE RC - Spur Gear 78T - 64DP

CORE RC - Spur Gear 78T - 64DP

Front Spring Set - Eclipse 6 (6 prs)

Front Spring Set - Eclipse 6 (6 prs)

Kimbrough - Precision Gear 64T-48DP

Kimbrough - Precision Gear 64T-48DP

M3 Alloy Thread Insert pk8

M3 Alloy Thread Insert pk8

Alloy M3 treaded inserts to upgrade the U7689  brass inserts. Lighter and cool black colour !

Pro Ball Bearings 1/4 x 3/8 x 1/8 Fl Shielded

Pro Ball Bearings 1/4 x 3/8 x 1/8 Fl Shielded

Extremely high quality 'Pro' ball bearing for LMP12 and rear axle.

Schumacher Bearing Guidlines

Yellow = ABEC5, oil filled, shielded, steel balls recommended for relatively clean conditions. Schumacher On Road cars kit specification.
Red = ABEC5, grease filled, double rubber seals, steel balls recommended for wet or dirty conditions. Schumacher Off Road cars kit specification.
Orange or Grey = ABEC 5, oil filled, shielded, extra hard ceramic balls for higher efficiency. Recommended for On Road.
Black = Pro High Precision German or Japanese manufactured, rubber seal. Recommended for Off Road.
Metal = Pro High Precision German or Japanese manufactured, shielded. Recommended for On Road.

Pro Ball Bearings 1/8 x 5/16 x 9/64 Fl Shielded

Pro Ball Bearings 1/8 x 5/16 x 9/64 Fl Shielded

Extremely high quality 'Pro' ball bearing for LMP12 and GT12 front wheels.

Schumacher Bearing Guidlines

Yellow = ABEC5, oil filled, shielded, steel balls recommended for relatively clean conditions. Schumacher On Road cars kit specification.
Red = ABEC5, grease filled, double rubber seals, steel balls recommended for wet or dirty conditions. Schumacher Off Road cars kit specification.
Orange or Grey = ABEC 5, oil filled, shielded, extra hard ceramic balls for higher efficiency. Recommended for On Road.
Black = Pro High Precision German or Japanese manufactured, rubber seal. Recommended for Off Road.
Metal = Pro High Precision German or Japanese manufactured, shielded. Recommended for On Road.

Rear Spring Black - Ultra pr - A-A3,E1-E6,Ic/2

Rear Spring Black - Ultra pr - A-A3,E1-E6,Ic/2

For the Eclipse and the Atom new Hard/Ultra shock spring harder than all the kit range springs and the hardest in the range.

Rear Spring Red Dot-Hard Ultra pr-A1-A3,E1-E6,Ic/2

Rear Spring Red Dot-Hard Ultra pr-A1-A3,E1-E6,Ic/2

For the Eclipse and the Atom new Hard/Ultra shock spring harder than all the kit range springs.

Rear Springs Black - Soft pr - A1-A3,E1-E6,Icon/2

Rear Springs Black - Soft pr - A1-A3,E1-E6,Icon/2

Rear Springs Gold -Med/Hard pr - A1-A3,E1-E6,Ic/2

Rear Springs Gold -Med/Hard pr - A1-A3,E1-E6,Ic/2

Rear Springs Nickel - Hard pr - A1-A3,E1-E6,Icon/2

Rear Springs Nickel - Hard pr - A1-A3,E1-E6,Icon/2

Sanwa Servo Spacer pr - E1-E6

Sanwa Servo Spacer pr - E1-E6

This pair of 1mm spacers provides an easy solution to assembling the Sanwa SRG-HR into an Eclipse 2 kit. It provides multiple useful functions;
- M3 nuts can be placed into the spacer and held in place easily during assembly, with no need for a
nut runner / spanner to secure.
- Because of this, servo can be placed centrally far easier, using only a hex driver.
- Raising the servo up to ensure all common servo savers don’t protrude underside of the chassis.