There are no products in your shopping cart yet.
Electronics
Loading...
CHARGE LEAD XH2S BALANCE PORT-ORANGE-1PC
2S Lipo charge lead with 4mm charger input plugs and 4-5mm battery plugs, including 2mm balance plug. 600mm. Extremely versatile, suits a wide range of chargers!
CHARGE LEAD XH2S BALANCE PORT-WHITE-1PC
2S Lipo charge lead with 4mm charger input plugs and 4-5mm battery plugs, including 2mm balance plug. 600mm. Extremely versatile, suits a wide range of chargers!
CHARGE LEADS - FUTABA RX
Great charging lead for charging receiver and transmitter packs. 4mm input connectors and Futaba output.
CHARGE LEADS 2 X 2S - BLACK
- An extremely useful charge lead which can charge and balance two 2S Lipo's simultaneously and acts as 4S charge leads. - Available in 4 colours, Black, Blue, Red and Orange. - 10 AWG wire - 600mm in length - Balance wire 22AWG 4S/5pin XH on charger side - Nylon covering and extremely well made -
CHARGE LEADS XT60-XH2S BALANCE PORT - SHORT
Charge Leads XT60 to XH2S Balance Black - Short 2S Lipo charge lead with XT60 charger input plug and 4-5mm battery plugs, including 2mm balance plug. 300mm. Extremely versatile, suits a wide range of chargers!
CONTACT TYRE TRUER - V2 SPEC
Introducing the Contact RC foam tyre truer.
This New V2 version has improvements in the sliding mechanism for more accuracy and ease of use.
This Contact tyre truer is a manually operated unit made from robust materials, including an excellent carbide cutting bit, usually found on much higher priced truers.
Special 'Quick Skim' feature to allow fast surface refresh of the tyres.
(The cutter can be moved by hand rather than turning the wheel)
Available with or without attractive carry bag.
- Suitable for 1/8th down to 1/12th sizes.
- Carbide cutting blade included.
- 12 volt DC input, with leads included. (Power supply required).
(If using an AC power supply we recommend a minimum of 10A)
- Plexi glass cover.
- Powerful motor.
- Universal fit arbors.
- Arbor not included, various types available separately.
- +- 3 deg cone adjustment.
Contact Tyre Truer with Bag
Contact Tyre Truer with Bag
Introducing the Contact RC foam tyre truer. This Contact tyre truer is a manually operated unit aimed at the mid range market.
Made from robust materials including an excellent carbide cutting bit usually found on much higher priced truers.
Special 'Quick Skim' feature to allow fast surface refresh of the tyres. The cutter can be moved by hand rather than turning the wheel.
Features:
- Suitable for 1/8th down to 1/12th sizes.
- Carbide cutting blade included.
- 12 volt DC input, with leads included. (Power supply required).
- Plexi glass cover.
- Powerful motor.
- Universal fit arbors.
- Arbor not included, various types available separately.
- +- 3 deg cone adjustment.
CORE RC HEATSINK BULLET PLUG GRIPS - 4MM
Awesome plug covers that help with the removal of your battery plugs. Plus, assist you in plugging in the correct polarity. Super bling look! Secures with the grub screw provided
CORE RC HEATSINK BULLET PLUG GRIPS - 5MM
Awesome plug covers that help with the removal of your battery plugs. Plus, assist you in plugging in the correct polarity. Super bling look! Secures with the grub screw provided.