De RUDDOG 30mm aluminium HV high speed koelventilator is speciaal ontwikkeld voor de behoeften van RC autoracen. De aluminium ventilator is ontworpen in Duitsland en heeft een uniquie ontwerp, dat er niet alleen geweldig uitziet, maar ook ruimte onder je lichaam bespaart. De high-speed ventilator is geschikt voor LiHV batterijen en kan gebruikt worden tot 8.7V. Het heeft een 200 mm lange zwarte draad met een laser gemarkeerde JR-stijl ontvangerstekker.

Kenmerken:
- Unieke aluminium ventilatorbehuizing
- Ontworpen in Duitsland
- Ultrahoge snelheid
- Dubbele kogellager
- Inclusief M3x14mm montageschroeven

Specifieke acties:
Spanning: 6,0 tot 8,7 V
Afmetingen: 31x31x11 mm
Montagegaten: Standaard 24 mm afstand voor de twee montagegaten (hetzelfde als elke andere 30 mm ventilator op de markt)
Gewicht: 12,5 g
Connector: JR-stekker
Lagers: Dubbele kogellagers
RPM: 29.000 @ 8.4V

Ruddog 3200mAh 3.7V MT-44 MT-5 LiPo TX Battery

Ruddog 3mm Washer Set 0.5mm/1.0mm/2.0mm (12pcs· Blue)

Ruddog 3mm Washer Set 0.5mm/1.0mm/2.0mm (12pcs·Orange)

The RUDDOG 3mm Washer Set in Black offers you a selection of precise washers in 0.5mm, 1.0mm, and 2.0mm thicknesses. These washers are perfect for fine-tuning your RC vehicle, allowing for optimal adjustments to various conditions.

The set includes 4 washers of each thickness, totaling 12 washers. The washers are available in various colors, including red, orange, blue, light blue, and black, to add that extra touch to your vehicle.

Features:

• 3mm washer set in various colors
• Thicknesses: 0.5mm, 1.0mm, 2.0mm
• Ideal for fine-tuning your RC Vehicle
• 4 washers of each thickness, totaling 12 washers
• Available in red, orange, blue, light blue, and black

The RUDDOG 3mm Washer Set in Light Blue offers you a selection of precise washers in 0.5mm, 1.0mm, and 2.0mm thicknesses. These washers are perfect for fine-tuning your RC vehicle, allowing for optimal adjustments to various conditions.

The set includes 4 washers of each thickness, totaling 12 washers. The washers are available in various colors, including red, orange, blue, light blue, and black, to add that extra touch to your vehicle.

Features:

• 3mm washer set in various colors
• Thicknesses: 0.5mm, 1.0mm, 2.0mm
• Ideal for fine-tuning your RC Vehicle
• 4 washers of each thickness, totaling 12 washers
• Available in red, orange, blue, light blue, and black

The RUDDOG 3mm Washer Set in Rlack offers you a selection of precise washers in 0.5mm, 1.0mm, and 2.0mm thicknesses. These washers are perfect for fine-tuning your RC vehicle, allowing for optimal adjustments to various conditions.

The set includes 4 washers of each thickness, totaling 12 washers. The washers are available in various colors, including red, orange, blue, light blue, and black, to add that extra touch to your vehicle.

Features:

• 3mm washer set in various colors
• Thicknesses: 0.5mm, 1.0mm, 2.0mm
• Ideal for fine-tuning your RC Vehicle
• 4 washers of each thickness, totaling 12 washers
• Available in red, orange, blue, light blue, and black

The RUDDOG 40mm Aluminum HV High Speed Cooling Fan has been specially developed for RC drivers. Designed in Germany, the aluminum fan has a unique design that not only looks great, but also saves space on your chassis.
This high speed fan is suitable for LiHV batteries and can be used up to 8.7V

Features:

• Aluminum case
• Double Ball Bearing

Ruddog Products' new TX battery is the perfect choice for your Sanwa M-17. The 1S battery can be charged with standard LiPo chargers. With a capacity of 5200 mAh, the battery caters for the requirements of Sanwa's power hungry top-of-the-line radio and will last throughout a long day of racing.

Specifications:

Ruddog 5mm Gold Cooling Head Bullet Plugs

Ruddog Aluminium Offset Servo Horn 25T (Black)

Das RUDDOG Aluminium Offset Servo Horn überzeugt nicht nur mit seiner Optik, sondern auch durch Qualität. Hergestellt aus 7075-T6 Aluminium bietet es die notwendige Festigkeit um ein präzises Lenkverhalten zu garantieren. Das Servo Horn wird nicht nur über die zentrale Befestigungsschraube montiert, sondern wird mittels einer zusätzlichen Schraube auf das Servo geklemmt. Dies bietet maximale Sicherheit gegen ein Öffnen der Befestigungsschraube und minimiert das Spiel zwischen Servo and Servohorn.

Lochabstand A: 16mm

Lochabstand B: 20mm

Offset: 10.8mm (Länge Rückseite zu Vorderseite)

Materiaal: 7075-T6 Aluminium

Servo-Aufnahme: 25T

Passt bei Servos folgender Hersteller: RUDDOG Products, Savox, Futaba, Highest, Protek, Hitec(neue 25T versionen), Reedy, MKS und vielen weiteren.