info

You have reached the minimum number

Shopping cart (0)

There are no products in your shopping cart yet.

ETS Touring Stock 13.5

Display:
 


Loading...
Muchmore Fleta V2 Euro Brushless ESC - Black - MM-ME-FLEV2

Quick view

Order

(0)
Extra delivery time
Muchmore Fleta V2 Euro Brushless ESC - Black - MM-ME-FLEV2

Muchmore Fleta V2 Euro Brushless ESC - Black - MM-ME-FLEV2

(0)
€ 99,90

FLOW-MAX2™ OPTIMIZED COOLING DESIGN
FLOW-MAX2™ Air hole designed maximum cooling through various tests. 

RPM LIMIT BLINKY MODE
FLETA EURO V2 ESC has RPM Limit mode functions. 
Using the RPM Limit mode, ESC control the limit RPM when your driving. This mode more fair control stock race. This function operate "Blinky V3.0_25RE2" firmware, Easy setup change of Normal Blinky mode and RPM limit Blinky mode with out firmware update . 
FLETA EURO V2 is the black translucent case, so you can easily check the mode.

DIRECT MOTOR & ESC COOLING FAN POWER
Battery power directly supply to the cooling fan, be able to do more high RPM cooling to ESC, Motor. ESC had separate motor cooling fan port, no needs soldering for the motor cooling fan wire.

- Optional Part-
MR-TU25FAN Turbo Cooling Fan 25x25x10mm 
MR-TU30FAN Turbo Cooling Fan 30x30x10mm
MR-TU40FAN Turbo Cooling Fan 40x40x10mm 

FELTA EURO V2 ESC Cooling fan is directly connected to the battery. However, if ESC turns off, the cooling fan will operate even. So battery voltage may drop if left unattended for a long time.

INTERNAL SWITCH SYSTEM
FLETA EURO V2's internal switch makes the wiring convenient.
- Power On/Off
- Calibration Setup
- RPM Limit Blinky mode <> Normal Blinky mode 

If you want to change Blinky mode, With the power on Press setup button successively 3 times . 
You can check which Blinky mode with LED status.

Normal Blinky mode: Green Fast Flashing
RPM Limit Blinky mode: Green Flashing twice and Red flash once

COMPACT & LIGHTWEIGHT DESIGN
FLETA EURO V2's compact & lightweight design, will make variety layout and spacious space on chassis. more easy adjusting the chassis balance.
Included 20x20mm ESC Cooling Fan and Motor connectors Female 3pcs, Male 3pcs

 

Current Continuous Continuous 80A / Peak 380A Input 2S LiPo, 2S LiFe, 5-7 cell NiMh/NiCd
BEC Output Switch Mode 6V/7.4V @3A Suppoerted Motor Type 540 size 2 pole brushless with sensor type
Suitable Motor Over 9.5T Size 26.5 x 32.7 x 17mm
Weight 21.5g (without Wire, Capacitor and Cooling fan)

Sunpadow Lipo Battery 8400mAh 7.4V 2S 120C/60C (long Pack) - S684064

Quick view

Order

(0)
Extra delivery time
Sunpadow Lipo Battery 8400mAh 7.4V 2S 120C/60C (long Pack) - S684064

Sunpadow Lipo Battery 8400mAh 7.4V 2S 120C/60C (long Pack) - S684064

(0)
€ 92,90

The NEW Sunpadow 2S High-Volt LiPo Battery with 8400mah and 120C at 7.4V is available now! A great power source for all 1:10 Touring Car classes! The huge punch of the battery pack can bring you that extra tenth of a second every lap! We recommend this pack especially for Stock Spec racing classes! Sunpadow Teamdriver Alexandre Duchet took the TQ and the Win in Pro Stock at the batterys first appearance at the ETS Final in the Hudy Arena!

Voltage Input: 7.4V                                      
C-rate: 120C (62.16wh)
Capacity: 8400mah                                        
Dimensions: 139 x 47 x 25,1mm
Weight: 324g                                                   
Connectors: 4mm

Mon-Tech Nazda6 2.0 Touring Electric Car Clear Body 190mm La Leggera - 010-001L

Quick view

Order

Mon-Tech Nazda6 2.0 Touring Electric Car Clear Body 190mm La Leggera - 010-001L

Mon-Tech Nazda6 2.0 Touring Electric Car Clear Body 190mm La Leggera - 010-001L

(0)
€ 22,90

Mon-Tech Nazda6 2.0 Touring Electric Car Clear Body 190mm La Leggera - 010-001L

Mon-Tech Racer Touring Electric Car Clear Body 190mm La Leggera - 017-008L

Quick view

Order

Mon-Tech Racer Touring Electric Car Clear Body 190mm La Leggera - 017-008L

Mon-Tech Racer Touring Electric Car Clear Body 190mm La Leggera - 017-008L

(0)
€ 21,90

The body to have, only lighter!

According to our team drivers this body gives a huge amount of steering with more then enough rear end stability. - 017-008L

Protoform Type-S Clear Body Lightweight 190mm - 1560-25
-4%

Quick view

Order

(0)
In stock
Protoform Type-S Clear Body Lightweight 190mm - 1560-25

Protoform Type-S Clear Body Lightweight 190mm - 1560-25

(0)
€ 27,95 € 26,95

The Protoform Type-S body is the answer from Protoform to the Racer of Mon-tech! Team drivers indicate that this body gives just a bit more steering than the Racer.

Protoform Type-S Clear Body Pro-Lite 190mm - 1560-22
-4%

Quick view

Order

(0)
In stock
Protoform Type-S Clear Body Pro-Lite 190mm - 1560-22

Protoform Type-S Clear Body Pro-Lite 190mm - 1560-22

(0)
€ 27,95 € 26,95

The Protoform Type-S Pro-Lite body is the answer from Protoform to the Racer La Leggera from Mon-tech! Team drivers indicate that this body gives just a bit more steering than the Racer.

MR33 No.1 Black Tire Indoor/Outdoor Additive 100ml - MR33-0002

Quick view

Order

(0)
Extra delivery time
MR33 No.1 Black Tire Indoor/Outdoor Additive 100ml - MR33-0002

MR33 No.1 Black Tire Indoor/Outdoor Additive 100ml - MR33-0002

(0)
€ 12,90

The tyre additive for ETS, Dutch Nationals and Club competitions. Can be used in combination with and without tire warmers.

MR33 V3 Asphalt Additive 100ml - MR33-0003

Quick view

Order

(0)
In stock
MR33 V3 Asphalt Additive 100ml - MR33-0003

MR33 V3 Asphalt Additive 100ml - MR33-0003

(0)
€ 14,90

Het smeermiddel voor ETS, NK en Clubwedstrijden. Kan gebruikt worden in combinatie met en zonder bandenwarmers.

RacingLine-RC Tire Cutter Pro - RL-0001

Quick view

Order

(0)
In stock
RacingLine-RC Tire Cutter Pro - RL-0001

RacingLine-RC Tire Cutter Pro - RL-0001

(0)
€ 6,95

RacingLine-RC Tire Cutter Pro - RL-0001

Racingline-RC Tyre-Cutter Get maximum performance from your new tourigcar tyres

Muchmore FLETA ZX V2 13.5T ER Fixtiming Spec Brushless Motor - MM-MR-V2ZX135FER
-5%

Quick view

Order

(0)
Extra delivery time
Muchmore FLETA ZX V2 13.5T ER Fixtiming Spec Brushless Motor - MM-MR-V2ZX135FER

Muchmore FLETA ZX V2 13.5T ER Fixtiming Spec Brushless Motor - MM-MR-V2ZX135FER

(0)
€ 89,90 € 85,40

Muchmore Racing research and development team succeeded to make a brand new motor that guarantees maximum power and efficiency.
Flow-Max 2 Cooling System is produced by simple 2-piece CNC processing that allows superior cooling effect.
We were able to enhance the cooling efficiency by 15% in comparison to our past motor products which is great achievement in terms of keeping the motor performance as high as possible.
In addition, the High Power New Stator Design approach doesn’t use separate insulator.
Therefore, less weight and maximum cooling efficiency achieved.
All FLETA ZX V2 motor incorporates “Maximum Low Resistance Copper Wire” that allows low internal resistance which results in maximum output power increase.
The motor uses Heavy-duty silver-plate solder tabs which reduce resistance.
Also, it uses the double eyelet to prevent fatiguing over time.
The stator design achieves very low internal resistance in exchange for surprisingly high output power.
Improved ease of maintenance and loss of weight is additional features achieved by NEW V2 design.

All new FLETA ZX V2 motor promises maximum power output and RPM achieved by Pure copper magnetic wire
and Low resistance collector rings.
MIXED TIMING Version of new FLETA ZX V2 Brushless motor is now available.
FLETA ZX V2 Fixed Timing Brushless motor is consistent with the rules of the ETS, many national championships, club races.
All new stator design offers smooth acceleration both on- and off-road racings.
Our recently upgraded manufacturing capability has achieved “precision balanced neodymium high-temperature rotor” which shows enhanced performance.
Also, special setup program and optional rotors make various kinds of tune-ups possible according to drivers’ choices.

Volante V5 Tough 1/10 36R TC Rubber Tire Preglued 4pcs - VT-V5T-PG36R

Quick view

Order

Volante V5 Tough 1/10 36R TC Rubber Tire Preglued 4pcs - VT-V5T-PG36R

Volante V5 Tough 1/10 36R TC Rubber Tire Preglued 4pcs - VT-V5T-PG36R

(0)
€ 29,90

Product information "Volante V5 Tough 1/10 36R TC Rubber Tire Preglued 4pcs"
The new "T" type tire carries the same high quality combination from the original V5, however with a new minimal air gap and new "Tough" rubber content. Making this the ideal tire choice, if longevity and stability is your preference. 
Best performs at outdoor asphalt tracks.

The latest establishment from Volante's tyre development brings you the premium Volante V5 tyre. Developed by Word Champions, the Version 5 combines maximum speed with maximum longevity. 
Tested on a variety of tracks around the world, the V5 provides superior traction to any other tyre, whilst limiting the "drop off" experienced by many other tires on the market. The tyre and wheel combination is perfectly true, meaning no vibration when driving. Minimum excess moulding material makes it unnecessary to "sand" or "cut" the line from now, making it less time consuming and risky preparing new tires. 
Volante V5's will be able to provide you with premium traction and longevity in any condition.

Volante V5 1/10 TC 28CP Indoor Carpet Rubber Tire Preglued - VT-V5-PG28CP

Quick view

Order

Volante V5 1/10 TC 28CP Indoor Carpet Rubber Tire Preglued - VT-V5-PG28CP

Volante V5 1/10 TC 28CP Indoor Carpet Rubber Tire Preglued - VT-V5-PG28CP

(0)
€ 27,91

Volante V5 1/10 TC 28CP Indoor Carpet Rubber Tire Preglued - VT-V5-PG28CP

Yellow RC LiPo 8000mAh 7,4V 2S 100C Hardcase - YEL2680

Quick view

Order

(0)
In stock
Yellow RC LiPo 8000mAh 7,4V 2S 100C Hardcase - YEL2680

Yellow RC LiPo 8000mAh 7,4V 2S 100C Hardcase - YEL2680

(0)
€ 69,00

Yellow RC LiPo 8000mAh 7,4V 2S 100C Hardcase - YEL2680

Yellow RC LiPo 7000mAh 7,4V 2S 90C w/5mmbullet - YEL2670

Quick view

Order

(0)
In stock
Yellow RC LiPo 7000mAh 7,4V 2S 90C w/5mmbullet - YEL2670

Yellow RC LiPo 7000mAh 7,4V 2S 90C w/5mmbullet - YEL2670

(0)
€ 64,95

Yellow RC LiPo 7000mAh 7,4V 2S 90C w/5mmbullet 3in1 plug, incl Deans charge cable - YEL2670

Perfect lipo for stock and modified touring!

XRAY Narrow Pinion Gear Alu Hard Coated 38T : 64 - 305988
-12%

Quick view

Order

(0)
In stock
XRAY Narrow Pinion Gear Alu Hard Coated 38T : 64 - 305988

XRAY Narrow Pinion Gear Alu Hard Coated 38T : 64 - 305988

(0)
€ 11,95 € 10,55

XRAY Narrow Pinion Gear Alu Hard Coated 38T : 64 - 305988

XRAY Narrow Pinion Gear Alu Hard Coated 42T / 64 - 305992
-12%

Quick view

Order

(0)
In stock
XRAY Narrow Pinion Gear Alu Hard Coated 42T / 64 - 305992

XRAY Narrow Pinion Gear Alu Hard Coated 42T / 64 - 305992

(0)
€ 11,95 € 10,55

XRAY Narrow Pinion Gear Alu Hard Coated 42T / 64 - 305992

Mon-Tech 0.75mm Racer Wing Medium - 018-003M

Quick view

Order

(0)
In stock
Mon-Tech 0.75mm Racer Wing Medium - 018-003M

Mon-Tech 0.75mm Racer Wing Medium - 018-003M

(0)
€ 7,70

Mon-Tech 0.75mm Racer Wing Medium - 018-003M

BittyDesign JP8 1/10 TC 190mm body (Light) - BDTC-190JP8

Quick view

Order

(0)
In stock
BittyDesign JP8 1/10 TC 190mm body (Light) - BDTC-190JP8

BittyDesign JP8 1/10 TC 190mm body (Light) - BDTC-190JP8

(0)
€ 24,95

When thinking about the best think about the JP8.

The ALL NEW ultra downforce body shell has been developed with the collaboration of our wordwide team drivers, who participated to the several stages of the project. The JP8 includes all of our experience gained in over 10 years of presence on the racetrack, and the final version of the body requested many changes before reach the perfect shape. To raise the bar we not accepted any compromise.

Tested for several months both indoor and even outdoor on different types of carpet and tarmac, the JP8 body shell represent a new reality for drivers all around the world who race at top levels and always want to obtain the best result with their models.

 

No Compromise

The JP8 project is born with one main target: create an all new ultra downforce body shell that can be the fastest, always. No matter what final shape and lines the body will have, how it will look, the focus during the designing stage has been pure performance.

LIGHTNESS and STRENGTH! Thanks to an excellent production process, which guarantees a high homogeneity of the material in any area of the body, we have reached a good compromise between weight and durability of the product. Several track tests have revealed excellent impact resistance, giving the JP8's extremely longevity.


 

The Art of Performance at his best

To achieve the best result possible in term of overall product we have made the most of all our know-how, our experience on the track allowed to us to develop, to design, to engineer and to test for several months a body shell that represent the new future for the 1/10 TC competitions.

The ultra downforce design generate impressive steering as well an excellent rear stability; very easy to push the car at limit, the driving feeling is great both on indoor and outdoors layouts.


Liquid Mask
layout styles

Product Features

The body respect all the international specs necessary for the approval by the federations, its EFRAIFMAR and BRCA homologated.

  • Made with high quality and genuine polycarbonate Lexan®
  • Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the rear wing
  • Produced in Light Weight version, thickness of material 0,75mm
  • Sold clear with protective film outside
  • Included in the package a few decal sheets pre-cut and windows mask

Track Guide for the use of the JP8 body

The following values offer an overview of the ideal conditions of use of the body according to the grip of the surface and its general handling.

The numbers below are meant as a progressive scale where 10 is a hypothetical maximum value.


   
Surface grip 

Enter Steering
10
Rear stability
10
Ease of use
10
Liquid Mask
 

SKYRC Tire Warmer - SK-600064-01

Quick view

Order

(0)
Extra delivery time
SKYRC Tire Warmer - SK-600064-01

SKYRC Tire Warmer - SK-600064-01

(0)
€ 94,90


What are the shining points 
of Racing Star Tire Warmer?

  • The temperature of 4 warmers is controlled by MCU.
  • The Front & Rear temperature can be set independently.
  • The front and rear Tire warmers are removable.
  • Four LEDs to indicate the status of warmers. (Red=Heating in progress, Green=Reach pre-set temperature)
  • There are two DC inputs. One is DC jack on the left side, the other is banana socket on the  bottom.

Why do you need a Tire Warmer?
Firstly, the Tire Warmer makes the surface rubber of the tire hot, so that the rubber can fill the little crevices of the track better, providing better grip in the early stages of the race. Having the surface rubber hot increases the co-efficient of friction of the rubber, adding to its ability to grip the track surface.
Secondly, using RacingStar Tire Warmers gives you the advantage of the tires being ready as soon as you roll out onto the track.
Special Features
  • Front & Rear temperature can be set independently
  • Temperature of 4 tires is controlled by MCU
  • Removable front & rear tire warmers
  • 8 different beep tones
  • Minimum temperature
  • Celsius - Fahrenheit selectable display
  • Four LED indicators
  • Safety timer

Compact design
DC InputFront-warmersoutputFront-Right LEDFront-left LEDLCD DisplayRear-Right LEDRear-Left LED
Tire Warmer CupFront LeftTire Warmer CupFront RightoutputFront warmer CupTire Warmer CupRear RightTire Warmer CupRear Left
 
New Operation System
Large LCD Display Screen 
Four choices Up, Down,Left,Right set with the Joystick.
 
Four LED indicators
The LED indicates red when the temperature of the tire warmers is warming. 
The LED indicators turn green once finished
Two DC inputs
There are two DC inputs, one is on the leftt side of the Tire Warmer the other is on the bottom.
Connect to AC/DCAdaptor or 3S LiPo BatteryDC Input Socket11-15V DC
What’s in the Box

Tire Warmer Controller



Front Tire Warmer Cups



Rear Tire Warmer Cups



DC Input Cable



Instruction Manual


Specifications
Input
11-18V
Temperature Range
20-80℃,100℃ / 68-176℉,212℉
Keys
Joystick - Up, Down, Left, Right
Weight
440g / 15.52oz
Atmospheric conditions may affect the final tire temperature
Size
Length : 111.4mm
Width  : 92mm
Height : 50mm

 

WTF 30mm x 10mm High Speed Fan Blow Harder - WTF3010BH9F

Quick view

(0)
Out of Stock
WTF 30mm x 10mm High Speed Fan Blow Harder - WTF3010BH9F

WTF 30mm x 10mm High Speed Fan Blow Harder - WTF3010BH9F

(0)
€ 13,50

Featuring the industry first 9 exhaust fins design which generates a twisting wind pattern for focused air flow, hence more air to cool the object. With the 9 exhaust fins design the support structure between the case and the core has increased 3 fold, together with thicker side wall the case is so much stronger than the standard 30 mm fan. A round lip also moulded into the intake side of the fan for further smooth out the air flow. Last but not least, these fans have been manufactured with all new electronics.