CARSON Inbussleutel 2,0 mm

Inbussleutel 2,0 mm

• Gehard staal
• Aluminium handvat

CARSON Inbussleutel 2,5 mm

Inbussleutel 2,5 mm

• Gehard staal
• Aluminium handvat

CARSON/TAMIYA 904063 Kogellagerset CC-02 Chassis (22)

904063 Kogellagerset CC-02 Chassis (22)

Cayote Racing Design Pre-Cut Stickers LIGHT GREY

Cayote Racing Design Pre-Cut Stickers LIGHT GREY

Cayote Racing Design Pre-Cut Stickers WHITE

Cayote Racing Design Pre-Cut Stickers WHITE

ceed Tyre Additive Applicator Pen (with 2 Glass Balls) - 10mm Tip

ceed Tyre Additive Applicator Pen (with 2 Glass Balls) - 10mm Tip

Xceed refillable tire additive applicator pen 10mm tip is made of high end material. With this medium length and long grip pen body,  you can be filled with your choice of tyre traction compound easily with this applicator brush ensuring evenly soaking of the tyre surface. The transparent design ensures easy recognition of the remaining fill level too.

Specifications:

Pen Size	135 x 24 mm
Pen Nib	10mm

Ceramic Bearing 1/8x5/16x9/64 Flanged (pr)SCHUMACHER

Ceramic Bearing 1/8x5/16x9/64 Flanged (pr)SCHUMACHER

Schumacher Bearing Guidlines

Yellow = ABEC5, oil filled, shielded, steel balls recommended for relatively clean conditions. Schumacher On Road cars kit specification.
Red = ABEC5, grease filled, double rubber seals, steel balls recommended for wet or dirty conditions. Schumacher Off Road cars kit specification.
Orange or Grey = ABEC 5, oil filled, shielded, extra hard ceramic balls for higher efficiency. Recommended for On Road.
Black = Pro High Precision German or Japanese manufactured, rubber seal. Recommended for Off Road.
Metal = Pro High Precision German or Japanese manufactured, shielded. Recommended for On Road.

charge lead with dummy-glow plug style connector, to use for glow-heater.

charge lead with dummy-glow plug style connector, to use for glow-heater.

CHARGE LEAD XH2S BALANCE PORT-BLUE-1PC

2S Lipo charge lead with 4mm charger input plugs and 4-5mm battery plugs, including 2mm balance plug. 600mm. Extremely versatile, suits a wide range of chargers!

CHARGE LEAD XH2S BALANCE PORT-ORANGE-1PC

2S Lipo charge lead with 4mm charger input plugs and 4-5mm battery plugs, including 2mm balance plug. 600mm. Extremely versatile, suits a wide range of chargers!

CHARGE LEAD XH2S BALANCE PORT-WHITE-1PC

2S Lipo charge lead with 4mm charger input plugs and 4-5mm battery plugs, including 2mm balance plug. 600mm. Extremely versatile, suits a wide range of chargers!

CHARGE LEADS - FUTABA RX

Great charging lead for charging receiver and transmitter packs.  4mm input connectors and Futaba output.

CHARGE LEADS 2 X 2S - BLACK

- An extremely useful charge lead which can charge and balance two 2S Lipo's simultaneously and acts as 4S charge leads. - Available in 4 colours, Black, Blue, Red and Orange. - 10 AWG wire - 600mm in length - Balance wire 22AWG  4S/5pin XH on charger side - Nylon covering and extremely well made -

CHARGE LEADS XT60-XH2S BALANCE PORT - SHORT

Charge Leads XT60 to XH2S Balance Black - Short 2S Lipo charge lead with XT60 charger input plug and 4-5mm battery plugs, including 2mm balance plug. 300mm. Extremely versatile, suits a wide range of chargers!

Charging Cable XT60 - XT90/XT60/T-plug/Tamiya/FUT/JR

Charging Cable XT60 - XT90/XT60/T-plug/Tamiya/FUT/JR

Features: 
 
XT60 to XT60 , XT90, T-Plug, FUT/JR, Tamiya connector.
Suitable for all common chargers
Cable length 300 mm
Cable type: 14AWG (XT60 charger connection) / 16AWG (battery connection) / AWG22 /JR connection) 
 
Scope of delivery:
 
1 pcs. multi charging cable

Charging Cable XT60 for Battery with MP Connector (60cm)

Charging Cable XT60 for Battery with MP Connector (60cm)

Charging Cable XT60 for Battery with T-Connector (60cm)MMC

Charging Cable XT60 for Battery with T-Connector (60cm)

Charging Cable XT60 for Battery with TRX Connector (60cm)MMC

Charging Cable XT60 for Battery with TRX Connector (60cm)

CHASSIS GEWICHTEN MESSING 2X5G 2X10G

CHASSIS GEWICHTEN MESSING 2X5G 2X10G

Jou auto te ligt of niet in balance????
dan is dit de juiste set voor jou auto.
inhoud:
messing gewicht van 5 gram 2x
messing gewicht van 10 gram 2x
incl m3 draad getapt en 4x stalen inbusschoefen 
en nette opberg box.

Circle Droop Gauge 4,0 - 6,6mm mmc

Circle Droop Gauge 4,0 - 6,6mm

De nieuwe "Circle Droop Gauge" heeft een meetbereik van 4,0 tot 6,6 mm en dekt daarmee volledig het spectrum dat vereist is in de 1:10 sector.
ook de geïntegreerde droop blokken zijn in de meter verwerkt.
en blijven door middel van de magneet netjes op hun plaats zitten bij niet gebruikt.
Door het nieuwe ronde ontwerp (40 mm diameter) is de meter veel gemakkelijker onder het voertuig te plaatsen dan de normale rechte versie. Hij raakt het chassis, 
de bumper of de achter brug minder snel en maakt het nog gemakkelijker om de veerwegen, 
die zo belangrijk zijn, nauwkeurig in te stellen.