There are no products in your shopping cart yet.
schumacher rc racing parts
12 / 20
Loading...
SCHUMACHER Alloy Eccentric (pr) - Mi6,Mi7,Mi8,FT8
€ 23,95
This differential/spool eccentric allows you to adjust the height of the diff/spool to a new 'High' position compared to the standard kit 'Low' position.
The smart looking piece as normal is used to adjust the belt tension, as well as being able to fine tune the feeling of the car.
Normally a higher front spool smooths the steering response compared to the standard low kit setting.
A higher rear diff can give the car more drive out of the turns keeping it flatter. A low standard position normally gives a little more side bite.
A worthwhile item to have available to tune your Mi7 to different track conditions.
SCHUMACHER Alloy LiPo Mount pr - Mi7,FT,Mi8,FT8,Mi9
€ 21,95
SCHUMACHER-Alloy-LiPo-Mount-pr-Mi7,FT,Mi8,FT8,Mi9
SCHUMACHER Alloy LiPo Swivel - Mi8,L1R,FT8,ST2,LD3,Mi9 (pr)
€ 12,95
SCHUMACHER Alloy LiPo Swivel - Mi8,L1R,FT8,ST2,LD3,Mi9 (pr)
Bling up your car with this cool looking black alloy LiPo swivel.
Increased strength over kit item.
When combined with U8438 Alloy Lipo Mounts - LD2 (pr) we suggest using a plastic LiPo swivel or a plastic height adjustment washer when using these as an insulator from short circuit.
SCHUMACHER Alloy Shock Top Ball - Mi8,FT8,Mi9 (pr)
€ 11,95
SCHUMACHER Alloy Shock Top Ball - Mi8,FT8,Mi9 (pr)
A slicker solution for mounting the shock tops to the shock tower.
Just 1 screw with a locating pip into the other holes in the tower.
SCHUMACHER ALLOY TRANS HOUSING HIGH (OPTION +2MM) - MI9 (PR)
€ 37,50
Optional transmission housing for the Mi9
The diff sits 2mm higher than standard in these.
Adjust upper link mounts by 2mm to achieve the same geometry.
SCHUMACHER Alloy Wishbone Spacer 0.5mm - Mi9 (pk8)
€ 6,50
SCHUMACHER-Alloy-Wishbone-Spacer-0.5mm-Mi9-(pk8)
SCHUMACHER Alloy Wishbone Spacer 1mm - Mi9 (pk8)
€ 6,95
SCHUMACHER-Alloy-Wishbone-Spacer-1mm-Mi9-(pk8)
SCHUMACHER Alloy Wishbone Spacer 2mm - Mi9 (pk8)
€ 6,50
SCHUMACHER-Alloy-Wishbone-Spacer-2mm-Mi9-(pk8)
SCHUMACHER ATOM 3 - S2 - GT12 - KIT
€ 249,95
€ 225,00
• ‘S2’ Version (#K207) All of the fibre components included are made from our own ‘S2’ Material, including the chassis itself.
• NEW - S2 chassis included in the kit, with increased flexibility, lower centre of gravity and lower cost than the ‘CF’ chassis.
• NEW - Gear Differential offering improved cornering ability in the majority of conditions. On power steering is improved as well as corner entry stability. The car will also drive much flatter and have more predictability in high traction conditions. The ball differential can still be used and is likely to be an improvement only in very low traction conditions. For ultra high grip tracks a spool option is also available.
• NEW - Top Decks include multiple flexibility settings to further fine tune the flex to gain even more performance.
• NEW - Fully updated front end design with much easier build, far simpler castor adjustment, improved drivability and overall performance. Maintenance is also reduced.
• NEW - Front beam improving front end flex characteristics.
• NEW - Front beam socket using O-ring fixing system.
• NEW - Moulded ultra-lightweight hub carrier with improved suspension and damping. More robust design.
• NEW - Longer lasting front damping with all new king pin.
• NEW - Big Bore side and centre damper, offering improved damping. They also give greater damper oil retention (less frequent maintenance required).
• NEW - Stronger pod base helping to remove any twist in the rear pod.
• NEW - Tweak free and easy LiPo mounting using new lightweight O-ring fixing.
• NEW - Interchangeable front LiPo position stops with 4 spaced settings included.
• NEW - Simplified lightweight servo fitment, fits directly onto slotted chassis holes.
• NEW - Independent, lightweight front bumper mount. Easier front end assembly.
• NEW - Optional brass weights in 5g or 7.5g can be fitted in multiple locations, to achieve the perfect car weight in this controlled weight class. Electronics can be removed by simply unscrewing the weights from underneath.
• NEW - Optional 1.5° camber strap, for when increased steering or agility is required. 1.0° camber is included in the kit.
• NEW Speed Secret 64 tooth 48dp Machined Spur Gear option.
• NEW - Range of optional colour coded front springs available.
• Lightweight pod assembly for better drivability and bump handling.
• Lightweight Low Centre of Gravity CNC Alloy Motor Mounts.
• Rear ride height adjusters, easy adjustment and 0.25mm height increments.
• Thread insert design making work on the car much quicker and simpler.
• Easy body shell height adjustment.
• Rotationally balanced left rear wheel clamp.
• Extra low rear roll centre pivot height for awesome rear traction.
• Centre pivot design for easy build and maintenance, with a fully bind free design.
• All black nuts as standard.
• Perfectly balanced rear pod assembly.
• Ultra-low motor position.
• Full Range of colour coded rear and side springs are available.
• Lightweight Low Centre of Gravity CNC Alloy Motor Mounts.
• Separate springs for independent roll and bump stiffness adjustment.
• Ball bearing front and rear axles.
• Adjustable front toe-in/out.
• Chassis balance pivot holes are included for use with U3582 pivot set, to optimise left/right weight distribution.
• Rear tweak adjustment via side springs.
SCHUMACHER BALL BEARING - 1/4X3/8X1/8 FLANGED YELLOW - (PR)
€ 4,99