Xray Silicone O-ring 4x2 (10)

Xray Serrated Lock Washer 3x6x1 (10)

Xray X8 Carbon Front Upper Wave Brace

Xray Rear Adjustable Drive Axle Lb For Rear Upright - Lower Position

Xray X4 Alu Motor Mount With 3mm Centering Pins - Deeper Countersunk

Hobbywing Quicrun Fusion Pro Elite 2300kv 2-4s

Hobbywing Quicrun Fusion 8ight Se 1800kv 2-4s

Hobbywing Quicrun Wp10bl80-g2 Crawler Brushed Regler 80a, Bec 5a

Xray Hex Screw Socket Head Cap M2.5x6 (10)

Xray Ball End 4.9mm With 9mm Thread - Hudy Spring Steel (2)

Servo CS-6 - 6kg/Low-Prof./WP/MG/JR CARSON

Carson 502047 Servo CS-6 - 6kg/Low-Prof./WP/MG/JR

De waterdichte CARSON CS-6 MG servo is een krachtige en snelle servo in low-profile formaat voor gebruik in natte en vochtige omgevingen (herfst/winter). De robuuste metalen tandwielkast garandeert een lange levensduur van de servo. Ideaal voor gebruik in modellen die een krachtige stuur- of actuatorservo nodig hebben en ook af en toe nat worden.

Technische details:
Bedrijfsspanning 4,8 - 6 V
Instelmoment 6 kg
Gewicht 43 g
Afmetingen: 40 x 20 x 19 mm (L/W/H)
Insteeksysteem Graupner-J/R

EH-Kokamsverlengkabel 4S RHI
0,25mm², Silicon 30cm lang

TAMIYA 9805827 3mm Persmoer (5 stuks)

TAMIYA Demper Veer (58367)

Geschikt voor de volgende Tamiya modellen:
- F103
- F103GT
- F103RS
- F103RX
- F103LM
- F104
- Tyrrell P34 Six Wheeler (47359, 84111, 84263)
- Lotus Type 79 (84122)
- Wolf WR1 (84124)
- McLaren MP4/5B Honda (84192)
- McLaren MP4/6 Honda (84193)
- Ferrari 643 (84194)
- Team Lotus Type 102B (84287

Tamiya nummer: 9808056

TAMIYA 10115211 S-parts voor 53257

Blitz TS040E 1/8 Body 0.7mm (Clear)

Power HD Racing Design Pre-Cut Stickers WHITE

Power HD Racing Design Pre-Cut Stickers LIGHT GREY

Power HD Racing Design Pre-Cut Stickers RED

Power HD Racing Design Pre-Cut Stickers PINK

Power HD Racing Design Pre-Cut Stickers YELLOW

Power HD Racing Design Pre-Cut Stickers GREEN

Power HD Racing Design Pre-Cut Stickers BLUE

Sanwa Design Pre-Cut Stickers WHITE

Sanwa Design Pre-Cut Stickers RED

Sanwa Design Pre-Cut Stickers PINK

Sanwa Design Pre-Cut Stickers GREEN

Sanwa Design Pre-Cut Stickers BLUE

Hobbywing Design Pre-Cut Stickers WHITE

Hobbywing Design Pre-Cut Stickers LIGHT GREY

Hobbywing Design Pre-Cut Stickers PINK

Hobbywing Design Pre-Cut Stickers BLUE

Flysky Racing Design Pre-Cut Stickers LIGHT GREY

Flysky Racing Design Pre-Cut Stickers WHITE

Flysky Racing Design Pre-Cut Stickers PINK

Flysky Racing Design Pre-Cut Stickers BLUE

Cayote Racing Design Pre-Cut Stickers WHITE

Cayote Racing Design Pre-Cut Stickers LIGHT GREY

XRAY/HUDY Design Pre-Cut Stickers YELLOW

XRAY/HUDY Design Pre-Cut Stickers WHITE

XRAY/HUDY Design Pre-Cut Stickers RED

XRAY/HUDY Design Pre-Cut Stickers PINK

XRAY/HUDY Design Pre-Cut Stickers GREEN

XRAY/HUDY Design Pre-Cut Stickers BLUE

Schumacher Design Pre-Cut Stickers WHITE

Schumacher Design Pre-Cut Stickers PINK

Schumacher Design Pre-Cut Stickers ORANGE

Schumacher Design Pre-Cut Stickers BLUE

Bittydesign Robox 1/12 Pan-Car Body Ultra Lite Weight

This project was born from the desire to offer to the enthusiast a body shell that could best combine maximum performance together with an all new style never seen before in this class.

The ROBOX body represents the best result of performance and aesthetics into the same product, a true eye-catching.

Premium Quality first of all

Our philosophy leads us not to settle for mediocrity or speculation, for each project we always pursue the same common thread: the best or nothing. To obtain products that fully meet our expectations, we dedicate months of virtual design and rendering in order to allow us to evaluate any improvements or details to be corrected.

QUALITY without any compromise is the basis of everything we make, the ROBOX body shell represents the perfect implementation of our philosophy that drives us to do better and that encourages us to make use of our know-how acquired in over 15 years of experience.

Bittydesign Engineering is synonymous with guarantee, authenticity and innovation.

Made with one target: the excellence

Making reference to a real LM race car, we took inspiration to design the lines of the ROBOX body shell adapted to the production needs, the phase of refinement took several months to optimize every detail, the search of perfection has been obsessive in order to offer a product that respect our quality standards.

ROBOX is a 1/12 Pan-Car body with a breathtaking look, the front nose so lowered with a new style never seen before generates an excellent cornering entry, the lowered cabin and the sides with a modern and futuristic design are part of the design phase during which we reasoned in an innovative way and that led us to create a product outside the box.

3D Cad design & engineering

In order to respect our quality standards, we have not set any limits and we have realized the ROBOX  project with the use of the most advanced graphics and Cad design; this process guarantees a perfect execution of the forms and details that high-tech machinery realize with 5-axis CNC milling machines.

The product we deliver in the hands of the enthusiast represents the best available on the market today, we exploit and make full use of the most advanced technology to guarantee a result that represents at best the Italian excellence.

Features:

• Made with high quality and genuine polycarbonate Lexan®
• Produced in Light Weight version, thickness of material 0,75mm
• Produced in Ultra Lite Weight version, thickness of material 0,75mm but thermoformed with Ultra Lite Technology (ULT)
• Sold clear with protective film outside
• Included in the package a decal sheet pre-cut and windows mask

1up Racing Gold Anti-Wear Grease