Tamiya

DF03 Aluminium olie geveerde demperset

TAMIYA XV-01 Q-Parts Demper

TAMIYA V-Parts Demper onderdelen

Aluminum Adjustable Servo Horn
Met deze Tamiya verstelbare aluminium claxon kunt u de stuurgeometrie van uw racewagens chasseren. U kunt het stuurbereik afstellen door de hoogte van de arm op de servo saver te verhogen of te verlagen.

- Servo Horn A, B & C componenten x1 elk
- Hi-Torque Servo Saver Spring (Large) x1
- Hi-Torque Servo Saver Springs (kort) x2
- Hi-Torque Servo Saver gegoten onderdelen x1
- Hiermee past u de afstand aan tussen het midden van de servohoorn en de kogelverbinding in stappen van 1 mm tussen 15 mm en 22 mm.
- Werkt ook als servo saver en helpt de servo te beschermen in geval van botsingen en stoten.
- Kleine onderdelen voor bevestiging inbegrepen.
- Compatibel met chassis-auto's TA07, TB-05, TT-02, TT-02B, M-07 Concept, M-06, M-05, CC-01, GF-01 en G6-01 *.

Tamiya Motortandwiel 0,6 20/21

TAMIYA Cera Grease HG

TAMIYA Motortandwiel 22T en 23T

TAMIYA Motortandwiel 22T en 23T

TAMIYA Clips verschillende grote

Zelftappers 3x8mm 8st.

passend voor o.a. 58416, 58271

Schroeven 10st. 3x20mm

T3-01 Grub screw 3x12mm MB6 VE2

Motorplaat A (BD7)

Motortandwiel 18-19T

BB6 Kunststofkogellager 5x11x4 14st.

RS-540 Torque-Tuned 25T Motor

TT-01/E/R P-Parts Servo Horn/Saver-Set

Passend voor TT-01, TT-02, TT02B

Wordt geleverd met certificaat voor deelname aan de Tamiya Cup!

This is an R/C model assembly kit depicting the GEN2 car used from 2018 in the Formula E championship, the pinnacle of electric car racing. The sleek, high-tech body with arch covered wheels is recreated in polycarbonate. Halo, mirrors and rear diffuser/bumper are separately molded components. Markings are included to recreate the Championship Livery car, and the model is based upon the shaft-driven 4WD of the TC-01 chassis.

TC-01: Seriously Low-Profile
This durable composite monocoque-frame chassis provides shaft driven 4WD from a central motor via front and rear propeller shafts, with oil filled gear differentials. 4-wheel independent double wishbone suspension employs long arms, plus inboard setups front and rear with oil shock-dampers actuated by push rods and rocker arms to allow the use of low-profile bodies. Adjust spacer width to easily alter camber, skid and toe angle settings. Both suspension arms and uprights are identical left, right, front and rear, for more efficient maintenance and pit work.
- 1/10 scale RC assembly kit.
- Length: 430mm, Width: 188mm, Height: 99mm
- Wheelbase: 257mm
- Tire Width/Diameter: 24/64mm (Front & Rear)
- Composite Monocoque-Frame Chassis
- Shaft-Driven 4WD
- Front & Rear Oil-Filled Gear Differentials
- 3-Piece Steering Tie-Rod
- Front & Rear Inboard 4-Wheel Independent Double Wishbone Suspension
- CVA Oil Dampers (Front & Rear)
- Gear Ratio = 6.56:1 (with kit 24T pinion)
- Use of different spacers allows alteration of camber, caster and toe angles for maximum freedom of setup.
- Change bumpers and body mounts to switch between formula and touring car layouts.
- The shaft-driven 4WD layout uses TB-05 design oil-filled gear differentials for smooth, efficient drive performance.
- Type 540 Brushed Motor included
- Polycarbonate body
- Halo and mirror components are molded in white ABS.
- In addition to the unique Formula E Gen2 body, this chassis is compatible with standard touring car measurement bodies. Wheelbase: 257mm.
- Stickers are included to recreate the championship car livery.
- Compatible with IFMAR standard “square-shape” dimension battery packs.
- Required to complete: 2-channel radio, steering servo, ESC, 7.2-7.4volt battery pack with compatible charge, and Tamiya PS paint for polycarbonate arts and Tamiya TS paint for ABS plastic parts.

Informatie:
- Chassis: TC-01 Formula-E
- Schaal: 1/10
- Rijden: 4WD
- Lengte: 430 mm
- Breedte: 188 mm
- Wiel diameter / breedte: 64 mm / 26 mm
- Overbrengings: 6,56: 1
- Type aandrijving: cardan

Leveringsomvang:
- Complete set zonder regelaar

De Volkswagen Scirocco GT24-R-Line- model nu als een kit op basis van het Tamiya TT01-E chassis. Het Tamiya model toont de Scirocco GT24-CNG die in 2011 de 24u-race op de Nürburgring won.

leveromvang:
Kit met geïllustreerde montage- instructies

Technische details:

• TT-01 Type E chassis
• 4WD chassis met aandrijfas
• Onafhankelijke wielophanging met dubbele draagarmen
• Gesloten differentieelbox zowel voor als achter
• Afzonderlijk gegoten zijspiegels en achterspoiler
• TEU- 104BK elektronische snelheidsregelaar (niet LiPo-capable)
• Type 540 elektromotor

Technische gegevens:

• Lengte 443mm
• Breedte 188mm
• Hoogte 138mm
• Wielbasis 257mm
• Tire diameter 67mm
• Bandbreedte 27mm

• High quality FET with output compatible with up to a sports tuned class motor.
• Easy push-button setup for maximum positioning of neutral / acceleration and reverse (braking).
• Features reverse disable function for competition races.
• Compatible with most makers RC systems.

The TEU-101BK is an easy to use ESC
that boasts all the functions of the high performance TEU-302BK with power
output equivalent to the CPR-01. With
size and shape virtually the same as the
TSU-01, the TEU-101BK can be fitted
in most old RC cars.