CAYOTE Crest Stocki 13.5T Brushless Motor

De nieuwe Cayote CREST Stocki is een wedstrijdgerichte borstelloze motor met hoge respons, speciaal ontwikkeld voor de professionele 1/10e & 1/12e schaal stock klasse.

Kenmerken: - Geoptimaliseerd magnetisch veld voor maximale efficiëntie en minimaal energieverlies - Snellere gasrespons en hoge toerenprestaties. prestaties bij hoge toerentallen - Soepele koppelopbouw voor betere tractie en meer controle - Mechanisch instelbare timing voor fijnafstelling van de prestatiekenmerken - Nauwkeurig uitgebalanceerde rotor - minder trillingen, - Versterkte rotorstructuur voor stabiliteit bij extreem hoge snelheden - Geoptimaliseerd thermisch ontwerp met verbeterde warmteafvoer voor consistente prestaties - Minder vermogensverlies en minimale prestatiefluctuaties over de hele race - Zeer nauwkeurig positioneringssysteem van de rotor voor exacte ESC-timing - vooral belangrijk bij lage snelheden en acceleratie - Modulair, gereedschapsloos onderhoudssysteem voor snel en eenvoudig onderhoud, gereedschapsloos onderhoudssysteem voor snelle reiniging en minimale stilstandtijd - Voldoet aan IFMAR, ROAR, EFRA, TITC & BRCA

De CREST Stocki levert de perfecte balans tussen vermogen, efficiëntie en betrouwbaarheid - ontworpen voor consistente topprestaties tot de laatste minuut van de race.

CAYOTE Racing 6500mAh 2S Shorty LiPo Battery 7,6V 145C 228g

• Capaciteit: 6500mAh
•  Gewicht: 228g (+- 5%)
• Hoogte van de batterij: 24,8 mm
• C-snelheid: 145C
• Watturen: 49,4
• Afmetingen (L x B): 95,6 x 46,2mm
• Aansluitingen: 5mm bussen

CAYOTE Racing 7200mAh 2S Mid-Shorty LiPo Battery 7,6V 145C 251g
CAYOTE Racing 2S middelgrote LiPo accu met een capaciteit van 7200mAh bij 7,6V en 145C.
Technische gegevens:

• Capaciteit: 7200mAh
• Gewicht: 251g (+- 5%)
• Hoogte van de batterij: 25,1mm
• C-snelheid: 145C
• Watturen: 54,72
• Afmetingen (L x B): 114 x 47mm
• Aansluitingen: 5mm bussen

2S Lipo charge lead with 4mm charger input plugs and 4-5mm battery plugs, including 2mm balance plug. 600mm. Extremely versatile, suits a wide range of chargers!

2S Lipo charge lead with 4mm charger input plugs and 4-5mm battery plugs, including 2mm balance plug. 600mm. Extremely versatile, suits a wide range of chargers!

CHARGE LEAD XH2S BALANCE PORT-RED-1PC

2S Lipo charge lead with 4mm charger input plugs and 4-5mm battery plugs, including 2mm balance plug. 600mm. Extremely versatile, suits a wide range of chargers!

Great charging lead for charging receiver and transmitter packs.  4mm input connectors and Futaba output.

- An extremely useful charge lead which can charge and balance two 2S Lipo's simultaneously and acts as 4S charge leads. - Available in 4 colours, Black, Blue, Red and Orange. - 10 AWG wire - 600mm in length - Balance wire 22AWG  4S/5pin XH on charger side - Nylon covering and extremely well made -

Charge Leads XT60 to XH2S Balance Black - Short 2S Lipo charge lead with XT60 charger input plug and 4-5mm battery plugs, including 2mm balance plug. 300mm. Extremely versatile, suits a wide range of chargers!

Charging Cable XT60 for Battery with T-Connector (60cm)

Charging Cable XT60 for Battery with TRX Connector (60cm)

Competition-LiPo-HV-140C/1S2P-HC-8300mAh-5mm-ABSIMA
The new ABSIMA LiPo batteries represent the current spearhead of development in lithium battery technology and offer new levels of performance. Masterful engineering skills, combined with experience from professional model sport, have resulted in a performance-optimised battery generation that is unrivalled on the track. The addition of graphene gives the battery improved properties such as higher energy density, lower internal resistance, higher discharge rates and a longer life cycle. 
 
Advantages of a graphene-lipo battery:
The ABSIMA Graphene Lipo series can be used as a standard 3.7V LiPo battery or as a high voltage (HV) 3.8V LiPo. But what is the difference between the capacities 3.7V Standard and 3.8V High Voltage? Normal LiPo batteries have a final charge voltage of 4.2V per cell when fully charged. Due to the unique hybrid RS cell structure, the new type can handle a little more and can be charged up to 4.35V. This not only results in more power from the start, but also means that there is more power in each individual cell and therefore longer runtimes can be achieved. 
 
How do I charge HV LiPo batteries?
First check whether your charger contains a programme for charging HV LiPos. It must be possible to set a final charging voltage of 4.35V. If this is the case, HV LiPo batteries can be charged in the same way as conventional LiPo batteries. The maximum charging rate for an ABSIMA Graphene Lipo is 5C (5 times the capacity of the battery).
 
Another very important note on the charging process!
Please be sure to reset the final charging voltage to 4.2V after completing the HV battery charge. Never charge a standard LiPo battery (3.7V) with a final voltage of 4.35V!
 
Good to know:
1. a LiPo battery should never be stored fully charged or discharged (3V under load / 3.5V open circuit voltage). For optimum battery life, it is recommended to store the LiPo battery in a cool room (e.g. cellar) with a charge level between 50%-80% of capacity. A LiPo battery that is 50% charged has a cell voltage of +/-3.85V.
2. HV-Lipos can also be charged with up to 4.2V like normal Lipos. Due to their much more compact design and lower voltage drop under full load, they still offer longer runtimes.
 
FEATURES:
 
Capacity: 8300mAh
Discharge rate (C): 140C
Voltage: 1S (3.8V HV)
Parallel: 2P
Wh: 31.54 
Max. charging current: up to 5C (1C recommended)
Cable: 12AWG - 200°
Balance cable: 22AWG - 200°
Cable connections: 5mm Bullet / T-Plug 
Design: Hardcase
Dimensions: 93*47*15.5mm
Weight: 146g
 
 

Contact Tyre Truer with Bag

Introducing the Contact RC foam tyre truer. This Contact tyre truer is a manually operated unit aimed at the mid range market.

Made from robust materials including an excellent carbide cutting bit usually found on much higher priced truers.

Special 'Quick Skim' feature to allow fast surface refresh of the tyres. The cutter can be moved by hand rather than turning the wheel.

Features:

• Suitable for 1/8th down to 1/12th sizes.
• Carbide cutting blade included.
• 12 volt DC input, with leads included. (Power supply required).
• Plexi glass cover. 
• Powerful motor.
• Universal fit arbors.
• Arbor not included, various types available separately.
• +- 3 deg cone adjustment.

Corally Balancer Lead 4S - Battery 4S XH Connector - Charger 6S XH Connector (30cm)

All TC balance and extension leads are build with flexible 22AWG zero-loss silicone wire capable of passing higher currents. All bundled together in a flexible braided sleeve.

Specifications:

CORE RC 10AWG Silicon Wire - Black - 1 METER
Heavy duty Core RC 10 AWG wire in black.  For those high load applications, very flexible insulation for easy neat wiring.

CORE RC 10AWG Silicon Wire - Red - 1 METER

Awesome plug covers that help with the removal of your battery plugs.  Plus, assist you in plugging in the correct polarity. Super bling look! Secures with the grub screw provided

Awesome plug covers that help with the removal of your battery plugs. Plus, assist you in plugging in the correct polarity. Super bling look! Secures with the grub screw provided.

Dash Silicon Wire 10AWG White 1m

Dash Silicon Wire 14AWG 1m - DA-771005

Deans female to Tamiya male cable

Dragster Turbo 2.0 motor 2600KV

Carson 906314 1:10 BL Dragster Turbo 2.0 Motor 2600KV

Technische gegevens:
Borstelloze motor: 2600 kV (t/min/V)
Stationair toerental: 20,720 tpm
Capaciteit: ca. 310 watt
Duurstroom: 42 A
Afm. (DxL): 35,8 x 50 mm
As-Ø: 3.175 mm
Gewicht: 148 g

Dragster Turbo 2.0 Motor 3200KV

Dragster-3 18TMOTOR  Carson 

EC5 Female to XT90 Male Adaptor Plug

eatures:

• 15 turns
• 32.000 rpm
• 16A
• 7.2 volt
• Motor size 540
• Shaft length: 8,6mm
• Shaft Ø 3,19mm
• Motor length 54mm
• Motor Ø 35,7mm

Flexibele sensorkabel 120mm TBLE-02S/04S

Flexibele sensorkabel 160mm TBLE-02S/04S

Flexibele sensorkabel 90 mm TBLE-02S/04S

De FlySky Noble NB4+ is een krachtige afstandsbediening met veel mogelijkheden voor RC auto en boot toepassingen.
Uitgerust met de derde generatie 2,4 GHz AFHDS-3 protocol en in combinatie met de meegeleverde FGr4B ontvanger, is de NB4+ een moderne oplossing die ook geschikt is voor gebruik in leraar-leerling situaties.
De eenvoudige bediening en duidelijke menunavigatie via het touchscreen maken het zelfs voor beginners gemakkelijk om te beginnen met het besturen van op afstand bestuurde modellen.

Kenmerken:

• Geavanceerde, moderne zender
• Uitgebreide leraar-leerling functie inbegrepen
• Ergonomisch ontwerp met draaibaar stuurwiel
• Geschikt voor rechts- en linkshandigen
• Dubbel batterijsysteem
• Intelligente RF-configuratie
• Lage latentie
• Kan ook worden gebruikt in simulaties etc. Toepassingen (standaard geactiveerd)

Technische gegevens:

Zender

• Type: 2,4GHz ISM
• Frequentieprotocol:AFHDS 3
• Kanalen:8
• RC modellen:Auto, boot
• Afstand: >300m (grond)
• Kanaalresolutie: 4096
• Batterij:- 1S / (4.2V) x 4300mAh LiPo
• - 3450mAh 18650 batterij
• Waarschuwing laag voltage: < 3.65V
• Type antenne: Externe enkele antenne
• Beeldscherm: 3,5-inch IPS aanraakscherm, resolutie 320x480px
• Oplaadinterface: USB-C
• Gegevensinterface: USB-C
• Temperatuurbereik:-10°C tot +60°C
• Vochtigheidsbereik:20% tot 95%
• Online update:Ja
• Abmessungen:131,41x115,95x190,56mm
• Gewicht:520g

OntvangerFGr4B

• PWM:4
• Type:2,4GHz ISM
• Frequentieprotocol:AFHDS 3
• Geschikte zenders:Alle zenders met AFHDS3 ondersteuning
• Antennetype: Enkele antenne
• Spanning:3.5-9V
• Gegevensinterface: PWM/PPM/i-BUS2/S.BUS/i-BUS
• Temperatuurbereik:-10°C tot +60°C
• Vochtigheidswaaier: 20% aan 95%
• Online update: Ja
• Abmessungen:17x29x16,6mm
• Gewicht: 6.4g

Omvang van de levering

• FlySky "NB4+" zender
• Ontvanger: FGr4B en kabel
• USB-gegevenskabel
• Greepschaal (S, L)
• Veren (S, L)
• Reserve gashendel
• 2x transparante beschermfolie
• Gebruiksaanwijzing

Product information "Flysky Noble NB4-Pro+ with 2 Receiver"

The FlySky Noble NB4 Pro+ is the most powerful model in the NB4 series. In addition to high-quality craftsmanship and modern design, the NB4 Pro+ also impresses with top performance. The remote control is equipped with the third-generation 2.4 GHz AFHDS 3 protocol, enabling extremely low latency and precise control. The new interface makes it easy to operate, even for beginners, and offers plenty of room for optional configurations.

The transmitter features an ultra-fast 2-channel mode that ensures low latency, allowing users precise control even in the most hair-raising moments. The 3.5-inch display has been significantly improved compared to its predecessor and now boasts a powerful contrast and brightness, making the NB4 Pro+ ideal for outdoor use. Additionally, a USB-C input, a better battery, and a dual battery system are new.

The NB4 Pro+ comes in a high-quality PVC case with two receivers, just like its predecessor.

Features:

• Advanced, modern transmitter
• Includes trainer-student function
• Compatible with all iBUS2 devices and some Hobbywing products (e.g., Xerun AXE R2 ESC)
• Freely customizable channels
• Ergonomic design with swivel wheel
• Suitable for both right- and left-handed users
• Dual battery system
• Intelligent RF configuration
• Low latency
• Also usable in simulations and similar applications (enabled by default)

Package Contents:

• FlySky "NB4 Pro+" Transmitter
• Receiver: FGr4B and Cable
• Receiver: FGr8B and Cable
• Hard case including key
• CNC Steering Wheel
• USB-C Cable
• Grip Shell (S, L)
• Spare Throttle Lever
• Manual

Product information "Flysky R4P ANT Receiver 4CH"

The R4P receiver is the ideal partner when using a Flysky remote control and is specially designed for the installation and output of PWM signals. Therefore it is supported by all ANT-capable transmitters.

Technical Specifications

Imars Dual Battery Charger supports 2 channel charging and discharging: DC port power supply supports maximum single port 300W charging, and AC power supply supports intelligent distribution of total power.

The power rate is 200W (2 channels), the maximum charging current is 15A, the charging current is adjustable, and the use and operation are simple; 7 operating modes of the products include charge, discharge, balance, storage, ExtDischarge, SyncCharging, digital power supply;

During the charging process of the product, the current task total voltage, charging/discharging current, working time and other information can be displayed in real time through the display window;

It can also query real-time single-cell voltage information, internal resistance, and temperature, which is convenient for users to understand battery performance and charging status;

The heat dissipation design can effectively ensure the continuous stable and reliable operation of the product.
 

Features:

• Dual Channel AC/DC Smart Balance Charger - Europe Version.
• Small & Lightweight Portable Design with wide-view IPS Display.
• High power charging, capable of Max15 amp charge rates for one channel, worldwide 100V-240V voltage versatility, AC 200 Watts, DC 600 Watts.
• External discharge function.
• Synchronous output, 2-in-1 Fast-charging.
• Built-in DC power source for different devices.
• Controlled heat dissipation system.
• Temperature compensation function.
• Advanced safety features, UL94-V0 Flame Retardant Grade.
• Protection of Short circuit / Overcurrent / Overcharge / Overvoltage

Specifications:

mars Dual Battery Charger supports 2 channel charging and discharging: DC port power supply supports maximum single port 300W charging, and AC power supply supports intelligent distribution of total power.

The power rate is 200W (2 channels), the maximum charging current is 15A, the charging current is adjustable, and the use and operation are simple; 7 operating modes of the products include charge, discharge, balance, storage, ExtDischarge, SyncCharging, digital power supply;

During the charging process of the product, the current task total voltage, charging/discharging current, working time and other information can be displayed in real time through the display window;

It can also query real-time single-cell voltage information, internal resistance, and temperature, which is convenient for users to understand battery performance and charging status;

The heat dissipation design can effectively ensure the continuous stable and reliable operation of the product.

Features:

• Dual Channel AC/DC Smart Balance Charger - Europe Version.
• Small & Lightweight Portable Design with wide-view IPS Display.
• High power charging, capable of Max15 amp charge rates for one channel, worldwide 100V-240V voltage versatility, AC 200 Watts, DC 600 Watts.
• External discharge function.
• Synchronous output, 2-in-1 Fast-charging.
• Built-in DC power source for different devices.
• Controlled heat dissipation system.
• Temperature compensation function.
• Advanced safety features, UL94-V0 Flame Retardant Grade.
• Protection of Short circuit / Overcurrent / Overcharge / Overvoltage

Specifications:

Goldkontakt Stecker 2mm

H-Speed Sensor Wire 125mm

Heteluchtblazer 300 Watt

Krachtige, handige heteluchtblazer. Ideaal voor modelbouw voor het nauwkeurig verwarmen van krimpkous, afdekfolie of in het algemeen voor het verwarmen van onderdelen.

Antislip handvat voor gemakkelijk gebruik. Werkt op een normaal 220V stopcontact.

Technische gegevens:
- Spanning: 220V/50HZ
- Macht. 300W
- Lengte: 22cm
- Gewicht: 200g

Omvang van de levering:
- 1 hetelucht blazer 300 Watt

Hiro Seiko Power Cable 60cm Silver - 12AWG - 48390

Everyone knows besides gold, Silver has the highest conductivity among all the ingredients.  However, only a few manufacturers are willing to develop power cable with silver wire.  Maybe some audio equipment related industry would develop it but there’s no other manufacturer has developed something like silver wire in RC industry.



We have targeted and improved the efficiency of conductivity.  In the first time in RC history, we released 12 AWG Power Cable with Silver Wire.

●12 AWG

●Ø0.05x1786 Strands

●Withstand Voltage 250/500V

●Temperature Range -40℃~180℃

●Length 60cm

Hobbyking GT2E AFHDS 2A 2.4ghz 2 Channel Radio System - 9114000017-0

Hobbywing 1s Dc/dc Booster, Hw30601000

Hobbywing AXE Plus R3 540L 1400kV R2 Combo
Product information "Hobbywing AXE Plus R3 540L 1400kV R2 Combo"

Navigating through any terrain becomes effortless with the AXE Plus Combo, which includes the R3 ESC and 1400kV 540L R2 motor. Thanks to the integrated FOC technology, this combo delivers linear power, ample torque, and nearly silent operation, making it ideal for challenging landscapes.

The intelligent control utilized in the R3 ESC allows for automatic torque adjustment, ensuring seamless climbing and descent of hills, while the smart fan activates only when necessary. This keeps energy consumption low and optimizes operating temperature during Your adventure. With versatile programming options and a wide range of adjustable parameters, the Xerun AXE Plus R3 ESC offers both powerful performance and excellent control for crawler RC cars under various conditions.

Additionally, the included 4-pole motor with a 3.175mm shaft and 1400KV features minimal cogging and runs smoothly under all conditions. This is also supported by Hobbywing's patented "Staggered Pole Rotor" design. To ensure this crawler combo operates flawlessly, it is also protected against water and dust according to the IP67 standard, allowing for long-lasting drives in diverse weather conditions. During product development, special attention was further given to ensure that the sensor port prevents water ingress.

Features

• Enhanced performance thanks to FOC (Field-Oriented Control) technology.
• Drag brake adjustable up to 200% for unparalleled holding power on inclines.
• Super BEC with a maximum of 6A and three voltage levels for various servo uses.
• Water and dust resistant to IP67 standard, including a waterproof sensor port.
• Intelligent torque delivery and speed control.
• The ESC features a built-in Bluetooth module for wireless programming.
• Motor with minimal cogging and smooth startup behavior.
• Optimized for sensitive power delivery.

Technical Specifications:

Delivery:

• 1x Xerun AXE Plus R3 ESC
• 1x Xerun AXE540L R2 Motor with 1400kV
• 1x Manual

Hobbywing Capacitors Module Stock Non-Polarity

Hobbywing Combo 10bl120 G2 Sensor 3650sd 10.5t

Hobbywing Combo 10bl120 G2 Sensor 3650sd 13.5t

Hobbywing Combo Max5 56113sl/800kv, Hw38010600

Hobbywing Combo Xerun Axe540 1800kv Foc Sensored Brushless System V1.1