1:10 Off-Road 4WD racing front rims 14mm white (2)

After a long time testing through our time drivers, finally ABSIMA is proud to present our 1:10 Aero Disc Competition Wheels!

Specially deisgned for competiton racing and made from the finest durable material we offer 4 different colors for everyone!

• 14mm Hex
• "Pro Flex" Material
• Ø 62 mm
• Width: 27mm
• Weight: 13g
• Application: 4WD front

Offset for Schumacher, Kyosho, TAE and Yokomo. For Team C cars a +1.75 hex offset is needed. For Xray the 14mm Xray hex +1,5mm is needed.

1:10 Screw set ABSIMA

• 10 x Set screw M3*3
• 10 x Set screw M3*10
• 10 x Countersunk screw M3*8
• 10 x Countersunk screw M3*10
• 10 x Countersunk screw M3*16
• 10 x Roundhead screw M3*8
• 10 x Roundhead screw M3*10
• 10 x Roundhead screw M3*12
• 10 x Roundhead screw M3*16
• 10 x Nuts M3  

1:16 EP BL Touring Car "FUN MAKER" neon genesis RTR ABSIMA

Our 1/16 touring car combines precision and performance in a compact and affordable model that can be taken anywhere and be ready for fun in no time!
This little powerhouse comes ready-to-run with (almost) everything you need to hit the track (only 2* AA batteries for the transmitter are needed). Whether you're racing with your friends in your backyard driveway, on the playground, in the office, or doing wild drifts in your living room, this little "fun maker" leaves nothing to be desired!
 
The chassis, with its powerful engine, all-wheel drive and independent suspension are just a few features that deliver impressive performance. In addition, the aluminum parts such as chassis plate, shock towers and shock absorbers which contribute to excellent rigidity and thus to the ultimate driving experience on smooth surfaces. This high-tech chassis keeps the center of gravity as low as possible to ensure a precise and responsive driving experience.
 
Short and sweet: This little powerhouse lies on the road like a board !
 
HIGHLIGHTS:

• Aluminum chassis for excellent handling characteristics
• Powered by a powerful 380 brushless motor
• High performance differentials on front and rear axle
• Independent suspension for exceptional handling
• Intricately designed, multi-piece bodyshell
• Speed: +/- 40 km/h

DESIGN:
 
The body with its aggressive design and very detailed shape is made of sturdy material to withstand impacts. It comes with a decal sheet including gluing instructions. Of course, you can also customize your sweetie or get an unpainted body (optional available - item 1610090) for a completely custom look. In addition, the engine dummy for the hood and of course the lighting front and rear complement the design.
     
     
 
CHASSIS PERFORMANCE:
 
Bling Bling! Already noble the design with the aluminum parts! Good looking, good performance!
Basically, the structure and arrangement of the components is like a 1:10 competition touring car:

• Independent suspension
• CVD front driveshafts
• Differentials with aluminum pinion gears (38Z) and pinion gears (14Z)
• Differential gears made of polyamide (12Z/24Z)
• Aluminum drive bones on rear axle
• Aluminum "big-bore" shock absorbers

Chassis, shock towers and upper deck made of aluminum not only give excellent stiffness. Due to the extra weight in contrast to carbon (which is used in high-quality 1:10 on-road chassis), the grip is increased here and thus the performance is increased. If that's not enough, you can treat yourself to fancy aluminum wheels (available as an option - item 1610092/1610093).
     
         
 
DRIVE UNIT:
 
a plenty of power for that scale!
Driven by a 380 brushless motor with 3300KV and a 30A receiver / speed controller unit with T-high current plug, one is already fast on the road and the insane torque provides for decent drifts! The motor is driven by a 16Z aluminum motor pinion (Mod.0.6 / 2.3mm motor shaft) and a 40Z main gear. If you ever want to change the gear ratio, please remember that the motor shaft has a diameter of 2.3mm. Accordingly, you must pay attention to this when buying the motor pinion. The firing is done by a 1500mAh 7.4V/2S LiPo battery. There is also a matching 20W/800mAh LiPo fast charger included
 
 
 

 
REMOTE CONTROL & STEERING:
 
A 2.4GHz remote control system is of course standard today! With our radio you also have the possibility to throttle the speed via a rotary control, if someone wants to take the control who is not yet so skilled. The steering takes over a fast steering servo with an actuating force of 2.2kg. This means that nothing stands in the way of the first drift attempts on smooth surfaces such as tiles or wooden floors.The optimal fun mobile for any smooth surface! 
      
 
FEATURES:

• 4WD All Wheel Drive
• 2.4GHz remote control
• Full ball bearing drive
• Aluminum chassis, upper deck and shock towers
• Aluminum "big bore" shock absorbers
• CVD axles on front axle
• Heavy duty front & rear differentials
• Aluminum propshaft
• LED lighting front & rear
• Extremely detailed body with sticker sheet

SPECIFICATION:

• Scale: 1:16
• Dimensions: (L/W/H): 310x140x80mm)
• Weight (without battery): 560gr
• Wheelbase: 175mm
• Ground clearance: approx. 6mm
• Track width: 110mm front / 115mm rear
• Wheels front/rear: Ø 50mm / Width: 18mm
• Damper filled: Yes (100CPS)
• Damper installation length: 38mm
• Motor ratio: pinion 16Z / main gear 40Z / module 0.6 (2.3mm motor shaft!)

INCLUDED:

• 1:16 Touring Car RTR
• 2.4GHz remote control
• 1500mAh LiPo battery
• 800mAh LiPo fast charger
• Sticker sheet
• Manual

      
REQUIRED ACCESSORIES:

• 2* AA batteries for remote control

1:8 Buggy disc rims white (2)

1:8 Buggy disc rims white (2)

 Hex hub: 17mm
√ Ø: 84mm
√ Width: 40mm
● 2pcs./set

10 EP Buggy "AB3.4-V2" 4WD RTR absima

• NEW* 80A brushed speed controller withT-connector and 540 motor
• NEW* Programmable speed controller
• NEW* 6kg steering servo
• NEW* LED lighting
• NEW* Downforce rear wing
• NEW* even more option parts available

1230290 Drive Shafts Buggy f/r (2)

1230290 Drive Shafts Buggy f/r (2)

2.4GHz 6-Channel Radio "CR6S" including Receiver with Mixed Mode for RC Cars, Boats and Tanks

FEATURES:

SPECIFICATION:

• Channel: 6CH
• Radio size (L/W/H): 160x100x200mm
• Water-proof receiver
• Receiver size (L/W/H): 35x20x13mm
• Radio operating current: 80-120mA
• Receiver operating current: 30mA
• Radio voltage range: 4.8-12V (LiPo suitable)
• Receiver voltage range: 3.3-10V
• Stable distance control up to 200m

SCOPE OF DELIVERY:

• CR6S 6-Channel Radio
• R6WP 6-Channel Receiver
• Manual (DE/EN/FR)

4-Channel Radio "CR4S" 2.4GHz incl. 2 Receiver ABSIMA

e "CR4S" is a 4-channel remote control including 2 receivers, which uses the latest AFHDS 2.4GHz "ANT" frequency hopping technology from ABSIMA. 
 
Lightweight and compact design, as well as comfortable and ergonomic shape. In addition, the remote control has a "beginner mode" and is therefore also suitable for pilots with less experience and also children.
 
      
 
The included receivers have a very compact design with a size of 30.2*18.0*13.0mm and fit in almost every receiver box. 
 
      
 
FEATURES
    
Description of the channels (the transmitter has 4 channels which are assigned as follows):
CH1: Steering wheel
CH2: Throttle lever (Trigger)
CH3: 3-position toggle switch
CH4: Push button
 
Reverse function (REV): This function can be used to set the direction of rotation of the steering servo/motor.
 
Trimming (TRIM): Adjustment of the straight run and throttle neutral position.
 
Dual Rate function (D/R): The steering angle and also the motor rotation power can be increased or reduced by operating this rotary knobs.
 
Failsafe function: This function determines what the receiver should pass on if the signal to the transmitter is lost (e.g. emergency braking).
 
Beginner modus: This function is intended for newcomers. In this mode the motor power is automatically reduced to 50%.
 
      
 
SPECIFIKATION 
 
Radio CR4S:
Channels: 4
2.4GHz Protocol: ANT
Distance: >150m
Battery (not included): 4*AAA 1.5 - 6V DC
Low V Warning: <4.2V (only NiMH)
Using LiPo TX battery possible: Yes (only LiPos with built-in low V protection)
Charging interface: No
Antenna type: Single antenne
Temperatur range: -10°C - +60°C
Dimension (L(W/H): 150*100*210 mm
Weight: ca. 130 g
 
Receiver R4WP Micro (2020016):
Channels: 4
Antenna type: external single antenna
Waterproof: Yes
Power: 3.5-8.4V
Failsafe: Yes (in connection with radio)
Temperatur range: -10°C - +60°C
Weight: 5 g
Size: 30.2*18.0*13.0 mm
 
 
SET INCLUDES
 
1* 4-Channel radio "CR4S"
2* 4-Channel receivers
1* Antenna tube
1* Manual (DE/ENG/FR)
 

6-Channel Receiver "R6WP" 2.4 GHz (for CR6S)

SPECIFICATION:

• Channel: 6CH Receiver
• Receiver size (L/W/H): 35x20x13mm
• Receiver operating current: 30mA
• Receiver voltage range: 3.3-10V
• Supports high voltage servos
• Water-proof
• Stable distance control up to 200 meters
• Only suitable for "CR6S" radio (2000009)

7-Channel Radio "CR7P" 2.4GHz ANT incl. 2xReceiver ABSIMA

This set contains 1* CR7P radio and 2* R7FS receiver units
 
This remote control system uses the new 2.4 GHz ANT protocol - "enhanced automatic frequency hopping digital system", consisting of a CR7P transmitter and a R7FS receiver. 
There are 7 channels available. The system is ideally suited for crawlers, on-road cars, off-road cars, drift cars and boats.
The large 3,5 x 7,0cm DOT Matrix Display shows all selected parameters clearly.
 
FEATURES 
 
Description of the channels:
CH1: Steering wheel
CH2: Throttle (Trigger)
CH3: SW1 knob
CH4: SW2 knob
CH5: SW3 3-way switch
CH6: VR1 rotary switch
CH7: VR2 3-way toggle switch
 
5-way navigation button
5-way trim switch
New "ANT" 2.4GHz protocol
Various MIX functions (program mixer, dual motor mixer, 4-wheel steering mixer)
Supports 4* AA batteries or 2S LiPo battery as power supply
2-way data transmission
20 model memories
Beginner Mode
Timer / lap counter
Standard functions like REV / EPA / SUB TR / D/R and CURVE settings
Internal antenna
Calibration program
Lightweight and compact design weighing only 305g (without batteries)
Up to 300m range
 
SPECIFICATIONS
 
Remote control CR7P:
Frequency: 2.4GHz
Channels: 7
Model type: cars, boats
RF frequency 2.4GHz; ISM: 2.4G protocol ANT
Maximum power: <20 dBm (EIRP) (EU)
Receive sensitivity: ≤-99dBm
Channel resolution: 1024
Undervoltage warning: YES
Date output: PWM/PPM/i-BUS/S.BUS
Input power: 4-9 V/DC
Battery: 1.5 AA * 4 / 2S Lipo (JST)
Data output type: -C- interface
Charging interface: NO
Antenna type: Built-in single coaxial cable antenna
Display Mode 128*64 LCD (DOT matrix screen, backlit)
Distance: ≥300 m (ground)
Working current: approx. 110mA/6V
Temperature range: -10?~+60?
Humidity range: 20-90%
Size: 136.4 x 111.8 x 197.5mm
Weight: 305g
 
Receiver R7FS (2020017):
Model: R7FS
Frequency: 2.4GHz
Channels: 7
Waterproof: NO
RF Frequency: 2.4GHz ISM RF Standard: ANT
Input power: 3.5-9 V/DC
Weight: 8g
Size: 35*23,3*13,3mm 
 
INCLUDED IN THE SET
 
1* CR7P remote controller
2* R7FS receiver
1* Instruction manual (DE/ENG/FR)

9-Channel Radio "CR9T" 2.4GHz incl. Receiver ABSIMA

• 3.5" large color touchscreen display with backlighting
• 9 channel (transmitter & receiver)
• 40 Model memories
• 5 Mix functions programmable
• GPS / Telemetry (optional)

 
 
 
 
 
 
 
 
 

• Voice assistant (English)
• 3,5" capative touch screen (480x320 color screen)
• Remote distance: 600m
• Optional GPS module
• 1S LiPo capable
• Mix functions
• 4-Wheel steering
• Dual ESC function (for Crawler)
• 180°/270° servo support
• Channel limit adjustable
• Trigger adjustable
• Spring tension (trigger/steering wheel) adjustable
• Display design and sound changeable
• Suitable for on-road cars, off-road cars, crawler, tanks, boats

 

• Channels: 9
• Frequency: 2.4GHz (2-Way Transmission)
• Frequency Hopping: FHSS
• Operating voltage: 3.5V-6.0V (1S LiPo / 4* AA Mignon)
• Battery compartment size (L/W/H): 100*50*18mm
• Power consumption: 260 - 400mAh
• Transmitter power: 100mW
• Temparature: -10°C - +60°C
• Weight: 320g
• Dimensions (H/W/D): 185x110x140mm 

 

• Channels: 9
• Connectors for GPS & Ext. Volt
• Waterproof and dustproof: IPX4
• Frequency: 2.4GHz
• Operating voltage: 3.5V-9.0V
• Weight: 8.3g
• Dimensions: 36.0x22.8x12.6mm

 

• CR9T 2.4GHz 9-Channel Radio
• R9GPS 2.4GHz 9-Channel Receiver
• Quick Start Manual DE/EN/FR
• Display protection foil
• Voltage sensor cable

 
 
 

• 4* AA Mignon batteries or 1* 1S LiPo battery (JR/FUT connection; Battery compartment size: 100*50*18mm)

• Optional*: 2020034 - GPS module
• Optional*: 2020036 - Display protection foil (pack of 3)
• Optional*: 2020023 - 9-channel RX 
• Optional*: 2020024 - 6-channel RX

AA/Mignon Premium Alkaline 1.5V LR06

AA/Mignon Premium Alkaline 1.5V LR06 4x

Absima LR06 AA Premium batteries are environmentally friendly and meet all safety and environmental regulations. They do not contain harmful substances like Hg/Cd/Pb and are suitable for a temperature range from -10° to +50°.
 
Absima alkaline batteries have a higher output voltage of 1.5V than NiMH batteries with 1.2V and are ideal for electronic devices like remote control systems. The voltage is stable to ensure reliable operation.
 
Features:

• No harmful substances such as mercury and cadmium
• Low self discharge
• Not rechargeable

Scope of Delivery: packs a 4 pcs of AA LR06 alkaline batteries

AAA/Micro Premium Alkaline 1.5V LR03 4x

ABSIMA 1.5mm Ball Allen Wrench

 
1.5mm Ball Allen Wrench

ABSIMA 2.0mm Allen Wrench

 
2.0mm Allen Wrench

ABSIMA 2.5mm Ball Allen Wrench

 
2.5mm Ball Allen Wrench

ABSIMA 3.0mm Allen Wrench

 
3.0mm Allen Wrench

ABSIMA 5.0mm Phillips Screwdriver

 
5.0mm Phillips Screwdriver

ABSIMA Threader M4

 
Threader M4

ABSIMA 1:10 Aero Disc Competition Wheels!

After a long time testing through our time drivers, finally ABSIMA is proud to present our 1:10 Aero Disc Competition Wheels!

Specially deisgned for competiton racing and made from the finest durable material we offer 4 different colors for everyone!

• 12mm Hex
• "Pro Flex" Material
• Ø 62 mm
• Width: 25mm
• Weight: 13g
• Application: 2WD front

Offset for Schumacher, Kyosho, TAE and Yokomo. For Team C cars a +1.75 hex offset is needed. For Xray the 12mm Xray hex +1,5mm is needed.