The RUDDOG 3mm Washer Set in Rlack offers you a selection of precise washers in 0.5mm, 1.0mm, and 2.0mm thicknesses. These washers are perfect for fine-tuning your RC vehicle, allowing for optimal adjustments to various conditions.

The set includes 4 washers of each thickness, totaling 12 washers. The washers are available in various colors, including red, orange, blue, light blue, and black, to add that extra touch to your vehicle.

Features:

• 3mm washer set in various colors
• Thicknesses: 0.5mm, 1.0mm, 2.0mm
• Ideal for fine-tuning your RC Vehicle
• 4 washers of each thickness, totaling 12 washers
• Available in red, orange, blue, light blue, and black

The RUDDOG 40mm Aluminum HV High Speed Cooling Fan has been specially developed for RC drivers. Designed in Germany, the aluminum fan has a unique design that not only looks great, but also saves space on your chassis.
This high speed fan is suitable for LiHV batteries and can be used up to 8.7V

Features:

• Aluminum case
• Double Ball Bearing

Ruddog Products' new TX battery is the perfect choice for your Sanwa M-17. The 1S battery can be charged with standard LiPo chargers. With a capacity of 5200 mAh, the battery caters for the requirements of Sanwa's power hungry top-of-the-line radio and will last throughout a long day of racing.

Specifications:

Ruddog 5mm Gold Cooling Head Bullet Plugs

Ruddog Aluminium Offset Servo Horn 25T (Black)

Das RUDDOG Aluminium Offset Servo Horn überzeugt nicht nur mit seiner Optik, sondern auch durch Qualität. Hergestellt aus 7075-T6 Aluminium bietet es die notwendige Festigkeit um ein präzises Lenkverhalten zu garantieren. Das Servo Horn wird nicht nur über die zentrale Befestigungsschraube montiert, sondern wird mittels einer zusätzlichen Schraube auf das Servo geklemmt. Dies bietet maximale Sicherheit gegen ein Öffnen der Befestigungsschraube und minimiert das Spiel zwischen Servo and Servohorn.

Lochabstand A: 16mm

Lochabstand B: 20mm

Offset: 10.8mm (Länge Rückseite zu Vorderseite)

Materiaal: 7075-T6 Aluminium

Servo-Aufnahme: 25T

Passt bei Servos folgender Hersteller: RUDDOG Products, Savox, Futaba, Highest, Protek, Hitec(neue 25T versionen), Reedy, MKS und vielen weiteren.

Das RUDDOG Aluminium Offset Servo Horn überzeugt nicht nur mit seiner Optik, sondern auch durch Qualität. Hergestellt aus 7075-T6 Aluminium bietet es die notwendige Festigkeit um ein präzises Lenkverhalten zu garantieren. Das Servo Horn wird nicht nur über die zentrale Befestigungsschraube montiert, sondern wird mittels einer zusätzlichen Schraube auf das Servo geklemmt. Dies bietet maximale Sicherheit gegen ein Öffnen der Befestigungsschraube und minimiert das Spiel zwischen Servo and Servohorn.

Lochabstand A: 16mm

Lochabstand B: 20mm

Offset: 10.8mm (Länge Rückseite zu Vorderseite)

Material: 7075-T6 Aluminium

Servo-Aufnahme: 25T

Passt bei Servos folgender Hersteller: RUDDOG Products, Savox, Futaba, Highest, Protek, Hitec(neue 25T versionen), Reedy, MKS und vielen weiteren.

The RUDDOG Body Marker Replacement Magnets, in a set of 4, are the perfect solution for replacing lost or damaged magnets in your body marker sets. These high-quality replacement magnets are compatible with body marker sets from Bittydesign, Arrowmax, and Protoform, ensuring secure and precise positioning of your body shell during marking.

Features:

• Replacement magnets for body marker sets (4pcs)
• Compatible with Bittydesign, Arrowmax, and Protoform body marker sets
• High-quality magnets for secure and precise positioning
• Ideal for replacing lost or damaged magnets

• DESCRIPTION

Introducing the RUDDOG CA Activator Spray, a cyanoacrylate accelerator designed for use with all conventional cyanoacrylate adhesives. The RUDDOG CA Accelerator significantly reduces curing time, whether the adhesive is high viscosity, medium, or thin. It is perfect for gluing on-road and off-road tires. Simply spray the activator carefully onto the adhesive area from a distance of approximately 50cm. With 200ml of content, the spray fits easily into any tool bag and is enough for numerous sets of tires and adhesive Areas.

RUDDOG Team Tip:

With some adhesives, it may be the case that unsightly white spots are formed on yellow rims due to the curing of the glue. Therefore, we recommend applying the activator spray indirectly to the adhesive when using rims that are not white. To do this, spray the RUDDOG activator into a cup or similar container that is large enough to cover your tire. Then simply place the cup with the sprayed cyanoacrylate activator over the tire or adhesive area. This helps to avoid stains on your rims!

WARNING and SAFETY NOTES:

Signal word:

Danger

Hazard statements:

EUH066: Repeated exposure may cause skin dryness or cracking.

H222 Flam. Aerosol 1: Extremely flammable aerosol.

H229: Pressurised container: May burst if heated.

H302 Acute tox. 4: Harmful if swallowed.

H311 Acute tox. 3: Toxic in contact with skin.

H336 STOT SE 3: May cause drowsiness or dizziness.

H411 Aquatic Chronic 2: Toxic to aquatic life with long lasting effects.

Precautionary statements:

P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No Smoking.

P251: Do not pierce or burn, even after use.

P301+P312: IF SWALLOWED: Call a POISON CENTER or doctor if you feel unwell.

P403+P233: Store in a well-ventilated place. Keep container tightly closed.

P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50°C/ 122°F.

P501: Dispose of contents/container in accordance with local/regional/national/international regulations.

Contains:

N,N-dimethyl-p-toluidine Pentane

Other hazards:

None

Precautions for safe handling:

handle with care to avoid spillage.

Keep out of reach of Children. If medical advice is needed, have product container or label at Hand.

Conditions for safe storage, including any incompatibilities:

keep in a sealed container in a closed, frost-free, ventilated room.

• High quality materials and workmanship
• Durable zip with RUDDOG logo
• Fits most 1/10 Touring Cars 
• Pocket for adress, business card or model type
  
  
  SpecificationsSize: 46x22x12cm
  Fits: 1/10 touring cars

Der RUDDOG Fan 30mm with 240mm black wire ist ein 30mm Lüfter entwickelt für die Ansprüche im Modellbau. Der 30mm Lüfter zeichnet sich durch seine Haltbarkeit und Drehzahl aus und ist somit die perfekte Wahl um den Motor oder die Elektronik zu kühlen. Das Anschlußkabel hat dabei eine Länge von 240mm und hat einen JR Empfänger Stecker.

Technische Daten

Spannung: 5-8.4 Volt
Abmessungen: 30x30x10mm
Gewicht: 6g
Stecker: JR stecker
Kabellänge: 240mm
 

Lieferumfang:

- 30mm RUDDOG Lüfter mit schwarzem 240mm Anschlusskabel (JR Stecker)

Der RUDDOG 40mm Lüfter wurde speziell für die harten Ansprüche im RC-Bereich entwickelt. Extra langlebig und mit einer hohen Drehzahl eignet er sich perfekt zur Kühlung von Motoren und Elektronik. Das 240mm lange schwarze Anschlusskabel bietet dabei die perfekte Länge für (fast) alle Anwendungen.

Technische Daten:

• Spannung: 5-8,4 Volt
• Abmessung: 40x40x10mm
• Gewicht: 8g
• Stecker: JR Empfänger Stecker
• Kabellänge: 240mm

Lieferumfang:

- 40mm RUDDOG Lüfter mit schwarzem 240mm Anschlusskabel (JR Stecker)

RUDDOG Fuel Bottle 500ml

The RUDDOG 500ml Fuel Bottle is made from high-quality plastic, featuring a lightweight design with a plastic neck for quick and easy refueling even during hectic pit stops. The soft material of the bottle allows for simple yet precise fueling, and comes with a matching cap to securely seal the bottle when not in use.

Rely on the RUDDOG Fuel Bottle to make your RC car refueling fast and efficient while enjoying style and quality.

Features:

• High-quality 500ml plastic fuel bottle
• Lightweight design for easy handling
• Plastic neck for quick and precise refueling
• Soft material for effortless fueling
• Matching cap for secure sealing
• Ideal for use in the pit lane

RUDDOG Fuel Tubing (Clear | 1m)

The RUDDOG Fuel Tubing (Clear | 1m) is a high-quality silicone hose for nitro-powered RC models. Its flexible yet durable design ensures a reliable fuel supply even under extreme conditions. With a length of 1 meter, it is ideal for various applications and replacement needs. The clear material allows easy visual inspection of the fuel flow, making it a practical choice for racers and hobbyists alike.

Features

• Premium silicone fuel tubing

• Flexible and durable construction

• Resistant to nitro fuel and oil

• Clear material for easy fuel flow inspection

Technical Data

• Material: Silicone

• Color: Clear

• Length: 1 m

• Inner diameter: approx. 3 mm

• Outer diameter: approx. 5.8 mm

De nieuwe RUDDOG HD LiPo oplaadcase is gemaakt van hoogwaardige materialen en is geschikt voor het opladen en opbergen van LiPo accu's. Met een afmeting van 180x80x80mm is de tas groot genoeg om drie 25mm standaard stickpacks, maximaal vier LCG accu's of een 4S accu in op te bergen. Het brandwerende materiaal is ideaal voor het veilig vervoeren, opslaan en opladen van batterijen. De tas is effen zwart met wit gedrukt RUDDOG-logo.
 

• Afmetingen: 180x80x80mm
• Hoogwaardig materiaal
• Lang houdbaar

Every RC tool box needs a hobby knife. The Ruddog Hobby knife is a pencil-shape, economic alternative. It has a black aluminium handle with the Ruddog logo and a plastic protective cap. Five spare blades are included with the knife, and a convenient 10 pack of # 11 spare blades is available separately (RP-0528).

While the suspension of your RC race car is one of its most important assemblies on the track, it can make wrenching quite a pain. The Ruddog Products aluminium car stands provide you with a sturdy basis for set-up and repair work on your chassis, and also includes labelled holes for shock maintenance. Thanks to the modern black and silver finish, the aluminium car stands look great on your pit table when you are racing on the track. As of now, the line-up includes an on-road car stand and a version for 1/10th scale off-road cars.

Dimensions: 16.5x11.5x6.2cm
Weight: 190g
Shock hole diameter: 13mm

The RUDDOG Pit Towel offers a practical alternative or complement to popular pit mats. It is perfect for catching overflowing damper oil and safely holding dropped differential balls or screws that might otherwise be lost in the pit area. Measuring 100 cm x 70 cm, the towel fits perfectly on a standard pit space and can be easily folded if needed. Folded up, it fits even where accommodating a sturdier mat might be challenging.
The pit towel in the classic RUDDOG colors is an attractive option for model builders on a limited budget or as a small gift, thanks to its affordable price. Made from 80% polyester and 20% polyamide, the towel is durable and easy to clean.
Features:

• Practical pit towel in classic RUDDOG colors
• Ideal as an alternative or complement to pit mats
• Dimensions: 100 cm x 70 cm
• Foldable and space-saving
• Material: 80% polyester, 20% polyamide
• Budget-friendly solution for model builders and as a gift

Experience premium performance with the RUDDOG Racing RR30C TC carpet tires. Developed in close collaboration with the RUDDOG Racing Team, these tires guarantee impressive performance that remains consistent over multiple runs. With superior grip and durability, they are the first choice for racers seeking unwavering grip and top Performance.

Features:

• Specially designed for carpet tracks including ETS carpet
• Developed hand in hand with the RUDDOG Racing Team
• Consistent, outstanding performance across numerous runs
• Package includes: 4 pre-glued tires.

The RUDDOG RED STUFF O-ring Grease is specially designed to improve the sealing and durability of O-rings and X-rings in RC shock absorbers and differentials. This 10ml syringe contains a high-quality grease that reduces friction and prevents the ingress of dirt and moisture, extending the life of the seals.

The convenient syringe allows for easy and precise application, helping to optimize the performance of your RC car components and increase their lifespan.

Features:

• Improves sealing and durability of O-rings and X-rings
• Suitable for RC shock absorbers and differentials
• Reduces friction and prevents ingress of dirt and moisture
• 10ml syringe for easy and precise application
• High quality and performance