51564, TRF419 Uitgang stijve diameter (2) Dienstverlenende artikelen

TRF419/420  Alu cups kegel-diff. (2)

These are replacement aluminum gear differential unit diff joint parts. They are used on the 4WD TRF419 on-road racing chassis and may be used to replace the steel diff joints on the TA-07 Pro and TA-07 R chassis.
These Lightweight and durable aluminum parts have been given a hard-anodized coating for smooth movement. Furthermore, the TRF419/420 and TA-07 Chassis gear differential units feature identical length diff joints.

• Contains Aluminum Diff Joint x2
• Use with item 51536 Swing Shaft Cap

Tamiya nummer: 51565

51569, TRF419 / 420 Zahnriemen vorn 171Z (1)

Tamiya 51638 TRF420

C Onderdelen Front Uprights Dit zijn de reserve stuuropstellingen voor het TRF420 raceauto chassis. Ze zijn voorzien van de nieuwe 2-delige frontopstaande ontwerpen die gebruik maken van afzonderlijke arm- en lagerhuiscomponenten. Je kunt deze nieuwe staanders ook gebruiken op bestaande Tamiya-toerwagenraceplatforms. - TRF420
C Parts x1 - Componenten zijn gegoten in koolstofvezelversterkte kunststof voor superieure stijfheid.


- Compatibel met TRF420, TRF419, TA07 en TB-05 PRO chassis auto's.

Passend voor volgende Tamiya kits: - TRF419 (42285) - TRF419X (42301) - TRF419XR (42316) - TRF420 (42345) - TA-07 Pro (58636) - TB-05 Pro (58658) Ook geschikt als reserveonderdeel voor de Tamiya Suspension Upgrade Set TRF419 (54886).

 

Tamiya 51642 TRF420/TA07 Front Direct Pulley 37T

This is a spare front direct pully component to the TRF420. Use this item to replace damaged or worn parts in your drivetrain.

- TRF420 Front Direct Pulley x1
- 0.2mm & 0.3mm Shims x2 each
- Front direct pulley and direct holder are an integrated plastic part for a weight savings of 2g compared to separate parts used on previous generation of TRF chassis.
- Direct cups are now screw-attached (was 2x9.8mm pins on previous chassis), allowing their replacement without the need to remove the direct pulley component.
- Compatible with TRF420 and TA07 chassis cars.

Tamiya number: 51642

EAN nummer: 4950344516421

TRF420 B Parts Bumper

One too many crashes? Not a problem! Tamiya has this spare bumper designed as a replacement part for the TRF420 kit.

- TRF420 B Parts x1
- The bumper design has been altered so as not to impact upon the chassis’ roll characteristics.
- New body mounts are 2mm offset; change their attachment position for different body mount location to fine-tune your car's center of balance.
- Compatible with TRF420 chassis cars.

Tamiya number: 51644

EAN nummer: 4950344516445

Tamiya 51646 TRF420 Rear Belt (62T)

- TRF420 Rear Belt (62T) x1
- This belt is made from reinforced, stretch-resistant material.
- It is recommended to change belts periodically to maintain optimum performance.
- Compatible with TRF420 chassis cars.

Tamiya number: 51646
 

TRF420 Gear Diff Unit Set

Passend voor de volgende Tamiya Kits:
- TRF419 (42285)
- TRF419X (42301)
- TRF419XR (42316)
- TRF420 (42345)
- TA-07 Pro (58636) 

Tamiya nummer: 51649

EAN: 4950344516490

53333, On-Road Tuned Spring set short 3x2 28mm

TRF 5,5mm Alu Spacer Set

TA07 Pro BC10/BC11

Tamiya nummer: 53539

EAN nummer: 4950344535392

53576, TRF Damper Oil Seal (4) black

RC 3mm Shim Set - 3 Types

Afmetingen:
- 3 mm Interne diameter
- 5mm Outer diameter
- 10 stuks met 0,1 mm dikte
- 10 stuks met 0,2 mm dikte
- 10 stuks met 0.3mm dik

Tamiya nummer: 53585

EAN: 4950344535859

Afmetingen:
- 4mm Inwendige diameter
- 6mm buitendiameter
- 10 stuks met 0,1 mm dikte
- 10 stuks met 0,2 mm dikte
- 10 stuks met 0.3mm dik

Tamiya nummer: 53586

RC 10mm Shim Set - 3 Types

These shim sets may be used to reduce suspension or wheel axle slop in any of Tamiya's on or off-road vehicles. Perfect for super fine tuning your race vehicle build.

Afmetingen:
- 10mm Binnendiameter
- 12,5 mm Buitendiameter
- 10 stuks met 0,1 mm dikte
- 10 stuks met 0,2 mm dikte
- 10 stuks met 0.3mm dik

Tamiya nummer: 53588

RC Dia 6mm Shim Set

Afmetingen:
- 6mm Binnendiameter
- 8mm buitendiameter
- 10 stuks met 0,1 mm dikte
- 10 stuks met 0,2 mm dikte
- 10 stuks met 0.3mm dik

Tamiya nummer: 53726

53918 TRF Damper V-Parts Connector/Damper Pistion

TA07 Pro BC21, M3x18 mm Alu Turnbuckle Shaft Blue anodized (2)

Tamiya nummer: 54247

EAN nummer: 4950344542475

Turnbuckle Shaft 3x23mm (2) Alu blue

Tamiya nummer: 54248

54249,M3x32mm Alu Turnbuckle Shaft (2) blue anodiz