Specifications:

Intellect Graphene 2024 "MC3" Hi Power 8400mAh 7.6V 2S 130C HV LiPo (5mm, 320g)

In 2024, Intellect has introduced the new MC3 series of racing batteries. The batteries under this collection are well designed for various racing applications.

With machinery upgrade, the MC3 batteries are having 1.5% improved in the production yield rate over the previous PT2 version.

The MC3 batteries would get EFRA, BRCA, & ROAR homologation accordingly.

Specifications:

In 2024, Intellect has introduced the new MC3 series of racing batteries. The batteries under this collection are well designed for various racing applications.

With machinery upgrade, the MC3 batteries are having 1.5% improved in the production yield rate over the previous PT2 version.

The MC3 batteries would get EFRA, BRCA, & ROAR homologation accordingly.

Specifications:

Intellect MC3 8800mAh 120C 3.8V 1S Long Runtime Graphene 1/12 Pack LiHV

As the leading manufacturer of lithium batteries for RC car modeling, Intellect presents its new MC3 LiHV battery series.
The MC3 series is the further development of the PT2 Platinum series. It sets a new standard in the RC car scene.
Intellect has a suitable battery in its range for most RC car applications.

Specifications:

• Capacity: 8800mAh
• Nominal Voltage: 3.8V / 1S
• Discharge-Rate: 120C
• Cell Type: Silicon-Graphene Lithium-Polymer
• Length: 93mm
• Width: 47mm
• Height: 18.5mm
• Weight: 152g
• Plug: 4mm

Charging and storage instructions:

Never store your batteries fully charged and or fully discharged. We recommend to store the batteries at the nominal voltage of the battery. We also recommend to use the batteries regulary, if you don't go to the track, then cycle them once every two weeks. The batteries must not be stored in direct sunlight, this also includes your car during a hot summer day. For a long lifetime of your batteries we recommend a charging rate of 1C. A higher charging rate will decrease the lifetime of your battery significantly.

We recommend to use a lipo bag during charging your battery: RUDDOG HD LiPo Ladetasche (180x80x80mm)

Installation:

When installing you battery, we recommend not to place them directly next to your motor. Should it not be possible to place your battery at a different place we strongly recommend the use of a motor fan to keep your motor cool and so also your battery. If you are looking for a motor fan, check out the RUDDOG aluminium fans, which are available in a 30mm and 40mm variant: RUDDOG 30mm Aluminium HV High Speed Cooling Fan and RUDDOG 40mm Aluminium HV High Speed Cooling Fan

Intellect batteries come including battery plugs. If you need additional plugs, you can find a wide range of plugs here: Stecker - RUDDOG Distribution GmbH

Limited Warranty:

We offer the German legal warranty time on all of our batteries. Inproper usage or storage can void this warranty.

Please note:
We do not currently ship LiPo or LiHV batteries outside mainland Europe.

Jconcepts motor / rotor box w/ foam liner - black

JST-XH 2S Balance Ext Leads 22AWG-30cm 3pin

JST-XH 3S Balance Ext Leads 22AWG-30cm 4pin

Kavan Bananas Plug 4mm Solder (Black+Red)

Kavan G4.0mm STD Connector Male (10pcs)

Kavan Shrinking Tube 3.0mm (25cm)

Kavan Shrinking Tube 4.0mm (25cm)

Kavan Shrinking Tube 5.0mm (25cm)

Kavan Shrinking Tube 6.0mm (25cm)

Kavan Shrinking Tube 8.0mm (25cm)

Kavan Stainless Steel Pocket Scale (500g/0.01g)

Kavan Traxxas Connector Male (1pc)

XT90 Charging cable for Dean-T batteries, length 25cm, 14AWG.

Charging cabel XT60 - Tamiya Gold - Lenght 200mm, 14AWG.

Kavan Y-Cable JR (150mm)