There are no products in your shopping cart yet.
NEW
Â
22 / 74
Loading...
MON-TECH Prot-Hole reinforcement rings
€ 7,95
Prot-Hole reinforcement rings
BESCHERMD JE BODY TEGEN IN SCHUREN.
Hudy Tire Additive - Tire Gripper Hybrid - 50ml - 106263
€ 24,95
Hudy Tire Additive - Tire Gripper Hybrid - 50ml
MR33 Tire Roller 1:10 Ride FWD Tires 36086S
€ 17,95
De bandenroller van MR33 wordt gebruikt om je racebanden voor te bereiden.
Zoals je waarschijnlijk weet, "rollen" veel coureurs de nieuwe banden met een beetje druk over het afstelbord voordat ze ze voor het eerst gebruiken.
Dit proces wordt gebruikt om de superlijm te "breken" op plaatsen waar mogelijk te veel bandenlijm is gebruikt. dit proces wordt gebruikt om de superlijm te "breken" op plaatsen waar mogelijk te veel bandenlijm is gebruikt.
Je kunt de bandeninzet ook iets platter drukken door te rollen, waardoor de lucht (de afstand) tussen de inzet en het bandenrubber toeneemt.
Als je alleen een inbussleutel of ander gereedschap gebruikt om te rollen, kun je geen gelijkmatige druk uitoefenen.
Je drukt ook precies op de rand van het gat waar later de wielas doorheen wordt gestoken, wat het kan vervormen - allesbehalve perfect!
De 3D-geprinte MR33 bandenroller is de perfecte oplossing.
Hij past perfect in de velg en zorgt voor een gelijkmatig contact en druk tijdens het rollen.
Het gat in de velg wordt ook niet belast en behoudt zijn oorspronkelijke vorm.
Inhoud: 1 x MR33 bandenroller voor Ride FWD banden (ETS) 36086S
CORE RC DRIVESHAFT CLIP PLIERS
€ 9,95
CORE RC Driveshaft clip pliers especially for the assembly of Mi9 driveshafts, but can also be used for other brands and circlip applications.
Cool look and CORE RC branding.
270MM FLAT BONDED FLEX SENSOR WIRE
€ 6,95
Keep your wiring super neat with this CORE RC flat sensor wire. Cool black look.
110MM FLAT BONDED FLEX SENSOR WIRE
€ 6,95
Keep your wiring super neat with this CORE RC flat sensor wire. Cool black look.
T CONNECTOR M TO F WITH JST/BEC LEAD
€ 5,95
Power splitter lead to enable use of a light kit etc..
Splitter lead takes power from the battery and provides two output connectors to connect to ESC and light kit.
CLOSED CELL INSERTS SHORT COURSE-1/8TH BUGGY PR
€ 9,95
This new closed cell foam insert from Schumacher is a must try for any 1/8th Buggy or Short Course runner. A black medium compound provides great impact absorption and low lateral movement for great stability on the track. Sold in pairs.
SCHUMACHER CNC STOCK SPUR GEAR 108T 64DP - MI8,FT8,MI9
€ 10,95
CNC STOCK SPUR GEAR 108T 64DP - MI8,FT8,MI9
RIPTECH RC - TI UPPER SCREW KIT - MI9
€ 44,95
RipTech Performance titanium screw kits
Why Titanium? The standout feature of these titanium screw kits is their approximate 45% weight saving over standard steel screws. Titanium is renowned for its exceptional strength-to-weight ratio, making it the ideal choice for competitive RC racing. Shedding excess weight allowing for a better balance and lower COG for quicker acceleration, improved cornering, and increased overall speed.
Content: The kits includes all the top side screws you'll need for your car (please note: it does not include under chassis screws as they are not required for performance), ensuring a hassle-free upgrade process.
Improved Handling: The reduced weight provided by our titanium screws enhances your cars balance and responsiveness. Your car will corner sharper, accelerate faster, and maintain better stability, giving you the competitive edge you've been looking for.
Precision Craftsmanship: Our screws are machined to perfection, guaranteeing consistent quality and performance.
Proven Results: RC racers have experienced significant performance improvements with our titanium screws.
Easy Installation: Replace your stock screws with our titanium ones using standard RC 2mm hex tool.
Images are to show product only, quantity and size will vary to your specified kit.
TAMIYA 45mm aandrijfassen voor dubbele cardanassen (2)
€ 19,95
45mm aandrijfassen voor dubbele cardanassen (2)
LRP WORKSTEAM ALUMINIUM HIGHREV. MOTOR FAN 30X30X10MM / 4,8V-7,2V / RECEIVER CONNECTOR
€ 29,95
LRP WORKSTEAM ALUMINIUM HIGHREV. MOTOR FAN 30X30X10MM / 4,8V-7,2V / RECEIVER CONNECTOR
Traxxas Led Light Set, Complete (includes Front And Rear Bumpers With Led Light Bar, Rear Led Harness, & Bec Y-harness) (fits 4wd Slash) - 6894
€ 52,95
Traxxas Led Light Set, Complete (includes Front And Rear Bumpers With Led Light Bar, Rear Led Harness, & Bec Y-harness) (fits 4wd Slash)
Xray Gtxe’24 - 1/8 Luxury Electric On-road Gt Car - 350605
€ 824,95
Xray Gtxe’24 - 1/8 Luxury Electric On-road Gt Car
XRAY GTX'24 - 1/8 LUXURY NITRO ON-ROAD GT CAR INCL G501 ENGINE
€ 1.329,95
XRAY GTX'24 - 1/8 LUXURY NITRO ON-ROAD GT CAR INCL G501 ENGINE
Xray Gtx'24 - 1/8 Luxury Nitro On-road Gt Car - 350505
€ 899,95
Xray Gtx'24 - 1/8 Luxury Nitro On-road Gt Car
Xray X8 - 1/8 Luxury Electric On-road Pan Car - 340500
€ 499,95
Xray X8 - 1/8 Luxury Electric On-road Pan Car
Xray X4f'25 - 1/10 Luxury Electric Tc Fwd - 300204
€ 599,95
Xray X4f'25 - 1/10 Luxury Electric Tc Fwd
SkyRC Battery Discharger and Analyzer 40A 380W
€ 129,95
Product information "SkyRC Battery Discharger and Analyzer 40A 380W"
The BD380 is a powerful discharger that allows you to comfortably discharge a battery with up to 40 amperes or 380 watts. But that's not all, as the discharger also offers the ability to measure battery performance during the process and even compare it with other batteries. Precisely measuring the capacity greatly assists in selecting the best battery for your next journey.
No matter what type of battery you want to discharge, factors and distinguishing features such as type, size, chemistry, and the number of cells don't matter. The BD380 can handle a wide variety of batteries up to 30 volts. Inside the robust housing with an XT60 connector for the battery, there is also an effective cooling system to ensure optimal operating temperature. The large color display shows values such as the battery voltage, discharged capacity, and discharge current, among others.
Features
No matter what type of battery you want to discharge, factors and distinguishing features such as type, size, chemistry, and the number of cells don't matter. The BD380 can handle a wide variety of batteries up to 30 volts. Inside the robust housing with an XT60 connector for the battery, there is also an effective cooling system to ensure optimal operating temperature. The large color display shows values such as the battery voltage, discharged capacity, and discharge current, among others.
Features
- 4 operating modes: CC (Constant Current), CR (Constant Resistance), CP (Constant Power), CV (Constant Voltage)
- Simple and innovative operation
- Effective cooling system
- Real-time display of battery voltage, discharged capacity, and discharge current
- Efficient testing of battery capacity for optimal battery selection for the next journey
- Controllable via integrated Bluetooth with the SkyCharger app for Android and iOS systems
- Detection of DC-stabilized power supply quality
| Operating Voltage: | 3,0 - 30,0V DC | |
| Discharge Voltage Range: | 5,9 - 30,0V (main port only) 3,0 - 30,0V (external power supply) |
|
| Low Voltage Alarm: | <3,0V | |
| High Voltage Alarm: | >max. 30,5V | |
| Discharge Power: | max. 380W | |
| Discharge Current: | 0,3 - 40,0A | |
| Operating Modes: | CC Constant Current | 0,3 - 40,0A |
| CR Constant Resistance | 1 - 100 Ohm | |
| CP Constant Power | 1 - 380W | |
| CV Constant Voltage (Note: Do not connect a battery in this mode) |
max. 180W power (Note: Set the max. current allowed for the current input voltage) |
|
| Connector: | XT60 | |
| Bluetooth Connection: | Yes (SkyCharger app) | |
| Language: | English, French, Spanish, German, Japanese, Chinese | |
| Dimensions: | 159,69 x 121,6 x 110mm | |
| Weight: | approx. 1100g | |
Hobbywing Xerun Bandit Brushless Motor G4 13.5T 3350kV
€ 124,95
Product information "Hobbywing Xerun Bandit Brushless Motor G4 13.5T 3350kV"
Those who are eager for high performance in 1/10 OBL competitions will make the right choice with the Xerun Bandit G4 motor series. This motor proves to be up to 18% more powerful and 12% more efficient compared to comparable G2R predecessors. With the fully adjustable timing ranging from 20 to 60 degrees, the full potential of the Bandit G4 is unleashed. The motor adopts a fully exposed stator core structure, meaning that the outer stator core is directly exposed to maximize heat dissipation performance.
Features:
- More power than the Xerun Bandit G2R series
- Dual sensor design for optimal wiring in RC car
- New motor housing with optimized cooling openings
- Adjustable timing from 20-60°
- High-precision manufactured rotor (5-13.9*24.1-AUS)
- High temperature tolerance of the winding
- Easily disassembled for maintenance
Technical Specifications:
| Winding: | 13.5T |
| Type: | Sensored Brushless |
| kV Rating: | 3400KV |
| Max. Power Output: | 368W |
| Max. Current: | 46A |
| No-Load Current: | 4.10A |
| LiPo Cells: | 2-3S |
| Poles: | 2 |
| Timing (adjustable): | 20-60° |
| Diameter: | 35.8mm |
| Length: | 53.9mm |
| Shaft Diameter: | 3.175mm |
| Shaft Length: | 14mm |
| Weight: | 187g |
| Application: | 1/10 OBL Stock, Outlaw Races |
Flysky FGr4D AFHDS3 Receiver 4CH
€ 54,95
Product information "Flysky FGr4D AFHDS3 Receiver 4CH"
The bidirectional FGr4D receiver is equipped with 4 channels and runs the AFHDS3 protocol. Thanks to the two built-in antennas and the compact design, there are numerous possible applications in the smallest of spaces. In addition to the four channels, the receiver also offers 5 functional interfaces that can be configured with different signal types such as i-BUS2, S.BUS, i-BUS and PPM. The FGr4D is also waterproof according to the PPX6 standard.
Technical Specifications
| PWM-Channels: | 4 |
| RF: | 2.4GHz |
| Protocol: | AFHDS 3 |
| Antennas: | Dual (internal) |
| Input Voltage: | 3.5-9V |
| Output: | PWM/PPM/i-BUS/S.BUS/i-BUS 2 |
| Temperature: | -10°C to +60°C |
| Max. Humidity: | 20%-95% |
| Update: | Yes, online |
| Dimensions: | 30.3x25.8x20mm |
| Weight: | 7.2g |
| Suitable for: | Cars, Boats |
| Compatible Transmitter: | all AFHDS3-Transmitter |
TAMIYA 54516 XV-01 Assy. Univ. Shaft R *2
€ 39,95
XV-01/T Halfcardan assen achter 39 mm (2)
De set bestaat uit een tuning aandrijfassen en wielassen.
De cardan minimaliseerd de wrijving van de aandrijfassen. (Onder andere meer snelheid)
Geschikt voor de volgende Tamiya chassis:
- XV-01 (58528)
- XV-01 Pro (58526)
- XV-01T (58552)
-TT-02R
-TT-02RR
Leveromvang:
- 2 stuks wielassen (9804648)
- 2 stuks 42mm aandrijfassen (53505)
- Kleine onderdelen voor de aandrijfassen (51444)
- Instructieblad
Houd er rekening mee dat deze set niet compatibel is met het XV-01 TC chassis
TAMIYA 53501 RC 42mm Swing Shaft
€ 25,95
Tamiya 53501 Aandrijfassen 42mm staal (2) TRF415
Swing Shafts 2St.
Passend voor de volgende Tamiya modellen:
- TB-02
- TB03- VDS - alleen achter
- TB-04R (84412)
- TRF414M2
- TRF415 (58320)
- TB Evo III
- TB Evo.6 Chassis (84379)
- TRF416 World Edition (42138) - alleen achter
- TRF416X (42162) - alleen achter
- XV-01 Pro (58526) - alleen voor
Power HD M8H 1:12 Pan Car Servo
€ 79,95
Power HD M8H 1:12 Pan Car Servo
De Power HD M8H is een topklasse servo die is geoptimaliseerd voor 1:12 racen.
De servo kan worden geïnstalleerd in alle panwagens die sleufgaten hebben voor de servomontage in het chassis.
De servo kan worden gebruikt met alle gangbare transmissiemodi (PGC, SSR, SUR, SXR, SR en SFR)
De M8H zorgt voor precieze besturing en nauwkeurige besturing in je 1:12 Pan Car.
Kenmerken:
- Aandrijfkracht (4,8V): 4,5 kg-cm
- Aandrijfkracht (6,0V): 6,3 kg-cm
- Bedieningskracht (7.4V): 7.5 kg-cm
- Bedieningskracht (8,4V): 8,5 kg-cm
- Snelheid: 0,11 sec (4,8V) │ 0,085 sec (6,0V)
- Snelheid: 0,073 sec (7,4V) │ 0,065 sec (8,4V)
- Bedrijfsspanning: 4,8 ~ 8,4 DC Volt
- Gewicht: 18 g
- Motortype：Cernloze motor
- Versnellingsbak：Alu
- Afmetingen：27,2 x 12,1 x 28,2 mm
- Servo hoorn: 25Z (niet meegeleverd)
Matrix 1:10 F1 Rear Foam Tire 35 Shore, precut 62mm
€ 16,95
Matrix 1:10 F1 Rear Foam Tire 35 Shore, precut 62mm
DE BAND VOOR TOS EN ETS 2024
Matrix sponsrubber achterbanden voor de 1:10 Formule 1 klasse.
De banden hebben een hardheid van 35 Shore en zijn geslepen tot een diameter van 62 mm.
De Matrix velgen zijn voorzien van de gebruikelijke zeskant aandrijving en passen daardoor op bijna alle gangbare 1:10 Formule 1 RC auto's!
Inhoud: 1 paar sponsrubber achterbanden (35 Shore), klaar geschuurd en op velgen gelijmd.
Technische specificatie
| Onroad: | Formule 1 |
| Product Type: | Wielen |
Matrix 1:10 F1 Front Foam Tire 50 Shore, precut 59mm
€ 15,95
Matrix 1:10 F1 Front Foam Tire 50 Shore, precut 59mm
DE BAND VOOR TOS EN ETS 2024
DE BAND VOOR TOS EN ETS 2024
Matrix sponsrubber voorbanden voor de 1:10 Formule 1 klasse.
De banden hebben een hardheid van 50 Shore en zijn geslepen tot een diameter van 59 mm.
De Matrix velgen passen op bijna alle gangbare 1:10 Formule 1 RC wagens met kogelgelagerde vooras!
Inhoud: 1 paar sponsrubberen voorbanden (50 Shore), klaar geschuurd en op velgen gelijmd.
De banden hebben een hardheid van 50 Shore en zijn geslepen tot een diameter van 59 mm.
De Matrix velgen passen op bijna alle gangbare 1:10 Formule 1 RC wagens met kogelgelagerde vooras!
Inhoud: 1 paar sponsrubberen voorbanden (50 Shore), klaar geschuurd en op velgen gelijmd.
Technische specificatie
| Onroad: | Formule 1 |
| Product Type: | Wielen |
Power HD GTS-3 Low Profile (0.055s/30.0kg/8.4V) Brushless Servo
€ 129,95
Specifications:
| Torque | (6.0V): 20.0 kg-cm / (277.7 oz/in) (7.4V): 26.0 kg-cm / (361.1 oz/in) (8.4V): 30.0 kg-cm / (416.6 oz/in) |
| Speed | 0.083 sec (6.0V) 0.067 sec (7.4V) 0.055 sec (8.4V) |
| Operating Voltage | 6.0 ~ 8.4 DC Volts |
| Weight | 63 g (2.22 oz) |
| Bearing Type | Ball Bearing x 2 |
| Motor Type | Brushless Motor |
| Gear Type | 7075+Steel |
| Max Current | 4.0A |
| Operating Temperature | -20℃~60℃ |
| Working Frequency | 1520μs / 1666hz |
| Size | 41.0 x 20.0 x 29.0 mm (1.61 x 0.79 x 1.14 in) |
Â