There are no products in your shopping cart yet.
ABSIMA
3 / 12
Loading...
ABSIMA 1:10 EP Monster Truck "AMT3.4" 4WD - 12224
€ 179,95
Fast and powerful, the new Hotshot 3.4 series is equipped with a powerful brushed electric motor, with heat sink, and waterproof electronic speed controller (ESC). Ready to run out of the box (EU & UK version only). Shaft driven 4WD provides you with the necessary traction to maneuver the toughest obstacles and the forward/reverse ESC is beneficial in navigating tight spots. Lightweight plastic chassis, four oil filled adjustable coil over shocks, and independent suspension offer rock solid performance. Fear not! A 2.4GHz radio system and waterproof electronics ensure control, for those who dare to unleash the power.
HIGHLIGHTS
- 40A Brushed Waterproof Speed Controller
- Powerfull 18T 550 Motor
- 2.4GHz Radio System
PRODUCT FEATURES
- Waterproof 40A brushed ESC
-
Select between NiMH and LiPo battery
- Ball bearing transmission
- 8 pcs. Oil filled adjustable shocks
- Gear differential front/rear
- Aluminum motor mount
- Complete covered transmission
- Adjustable turnbuckles & wishbones
- Motor heat sink
- Aero disc racing wheels
- Full printed body
- 2.4GHz radio System
- Sticker sheet for a unique design
- Performance hop ups available!
TECH SPECS
- Motor Type: 18T 550 Brushed Motor
- Transmission: Forward, Brake & Reverse
- Drive System: 4 Wheel Drive
- Wheelbase: 270mm
- Ground Clearance: 55mm
- Measure (L/W/H): 425x300x200 mm
- Weight: 1850g
- Tire width: 57 mm front / 57 mm rear
- Tire Ø ± 116 mm
- Shock spring force: medium / Length: 95mm f/r
- Shock oil viscosity: 400 f/r
- Motor transmission: Pinion 17T / Gear 64T
- Pinion module: 0.6
MORE FEATURES:
- Speed Controller (2100002): NiMH (7.2V) & LiPo (7.4V/2S) suitable / Amps: 40A / BEC 5V/2A / Drive function: forwards/brake/reverse / Plug system: Tamiya
- Servo (2030003): 4kg steering force / 25T outdrive
- Motor (1230361): 18T / 28.000RPM / 12A / Size: 550
- Radio (2000001): 2-channel radio / 3-channel receiver / reverse / dual rate / trimming
SCOPE OF DELIVERY
- Monster Truck "AMT3.4" RTR - brushed version
- 2.4GHz Radio System
- Manual
- Sticker Sheet
REQUIRED ACCESSORIES
- Battery - Racing Pack NiMH or LiPo (up to 30C)
- Charger
- 4x AA Mignon Batteries for Radio
ABSIMA 1:10 EP Truggy "AT3.4BL" 4WD Brushless
€ 269,95
HIGHLIGHTS:
- Water-resistant 50A BL Speed Controler (programmable)
- Powerfull 3300KV BL Motor
- 2.4GHz A.F.H.D.S. Radio System
- Full Aluminum Shocks
- Steel Motor Transmission
GENERAL CHASSIS FEATURES:
- 4WD
- Complete ball bearing
- Adjustable aluminum oil shocks
- Gear differential front/rear
- Aluminum motor mount
- Complete covered transmission
- New chassis layout for better performance
- Adjustable turnbuckles
- Adjustable wishbones
- Aero disc racing wheels
- Full printed body
- Sticker sheet for a unique design
- A lot tune-up parts available!
TECHNICAL SPECIFICATION:
- Measure (L/W/H): 405x325x165 mm
- Weight: 1550g
- Wheelbase: 270 mm
- Chassis clearance: 40 mm
- Tire width: 55 mm front / 55 mm rear
- Tire Ø ± 105 mm
- Shock spring force: medium / Length: 85mm f/r
- Differential oil viscosity: 1.000 front / 3.000 rear
- Shock oil viscosity: 400 f/r
- Steel Motor transmission: Pinion 23T / Gear 64T
- Pinion module: 0.6
MORE FEATURES:
- BL Speed Controller (2110007): programmable (brake power, neutral brake, drive mode, punch, V cut-off) / NiMH (7.2V) & LiPo (7.4V/2S) suitable / Amps: 50A cont./300A peak / BEC 6V/3A / Overheat cut-off / Drive function: front/reverse/brake (standard) / Plug system: T-plug (Deans style)
- Servo (2030003): 4kg steering force / 25T outdrive
- Motor (2130005): 3300KV / 27.400RPM @ 7.4V / Operating voltage: 4.8 - 11.1V / Size: 540
- Radio (2000001): 2-channel radio / 3-channel receiver / reverse / dual rate / trimming
SCOPE OF DELIVERY:
- Truggy "AT3.4BL" RTR - brushless version
- 2.4GHz Radio System
- Manual
- Sticker Sheet
- Battery - Racing Pack NiMH or LiPo (recommended)
- Charger
ABSIMA 1:10 EP Truggy "AT3.4KIT" 4WD -KIT
€ 99,95
€ 94,95
HIGHLIGHTS
- KIT Version for self assembling
- Racing Body Design
- Including 2 Versions of Motor Transmissions for Brushed & Brushless (Steel Version)
- NOTE: KIT Version don`t includes any electronic components!
PRODUCT FEATURES
- Ball bearing transmission
- Oil filled adjustable shocks
- Gear differential front/rear
- Aluminum motor mount
- Complete covered transmission
- Adjustable turnbuckles & wishbones
- Motor heat sink
- Aero disc racing wheels
- Full printed body
- Sticker sheet for a unique design
- Performance hop ups available!
TECH SPECS
- Drive System: 4 Wheel Drive
- Wheelbase: 270mm
- Ground Clearance: 40mm
- Measure (L/W/H): 405x325x165 mm
- Weight: 1375g
- Tire width: 55 mm front / 55 mm rear
- Tire Ø ± 105 mm
- Shock spring force: medium / Length: 85mm f/r
- Differential oil viscosity: 3.000 front /1.000 rear
- Shock oil viscosity: 400 f/r
- Motor transmission: Pinion 23T / Gear 64T
- Pinion module: 0.6
SCOPE OF DELIVERY
- Truggy "AT3.4" KIT version
- Manual
- Sticker Sheet
REQUIRED ACCESSORIES
- Radio System
- Steering Servo + Servo Horn
- Electric Speed Controller (brushed or brushless)
- 540size Electric Motor (brushed or brushless)
- Battery - Racing Pack NiMH or LiPo (up to 30C)
- Charger
- 4x AA Mignon Batteries for RadioHIGHLIGHTS
- KIT Version for self assembling
- Racing Body Design
- Including 2 Versions of Motor Transmissions for Brushed & Brushless (Steel Version)
- NOTE: KIT Version don`t includes any electronic components!
-
PRODUCT FEATURES - Ball bearing transmission
- Oil filled adjustable shocks
- Gear differential front/rear
- Aluminum motor mount
- Complete covered transmission
- Adjustable turnbuckles & wishbones
- Motor heat sink
- Aero disc racing wheels
- Full printed body
- Sticker sheet for a unique design
- Performance hop ups available!
TECH SPECS- Drive System: 4 Wheel Drive
- Wheelbase: 270mm
- Ground Clearance: 40mm
- Measure (L/W/H): 405x325x165 mm
- Weight: 1375g
- Tire width: 55 mm front / 55 mm rear
- Tire Ø ± 105 mm
- Shock spring force: medium / Length: 85mm f/r
- Differential oil viscosity: 3.000 front /1.000 rear
- Shock oil viscosity: 400 f/r
- Motor transmission: Pinion 23T / Gear 64T
- Pinion module: 0.6
-
SCOPE OF DELIVERY - Truggy "AT3.4" KIT version
- Manual
- Sticker Sheet
-
REQUIRED ACCESSORIES - Radio System
- Steering Servo + Servo Horn
- Electric Speed Controller (brushed or brushless)
- 540size Electric Motor (brushed or brushless)
- Battery - Racing Pack NiMH or LiPo (up to 30C)
- Charger
- 4x AA Mignon Batteries for Radio
ABSIMA 1:10 Screw set
€ 12,95
Features: All common small parts you need for a 1/10 scale car.
Contains:
- 10 x Set screw M3*3
- 10 x Set screw M4*4
- 10 x Set screw M4*10
- 10 x Nuts M2.5
- 10 x Nuts M3
- 10 x Nuts M4
- 10 x E-Clips 2.3
- 10 x E-Clips 4.0
- 10 x O-Rings 2.8*1.9
- 10 x O-Rings 4.8*1.6
ABSIMA 1:24 2WD Touring/Drift Car "X Racer" RTR with ESP
€ 49,95
HIGHLIGHTS:
- RTR version with battery, charger and remote control
- Speed +20 km/h
- Full digital proportional control
- Electronic Stability Program (ESP)
Our small 1:24 scale X-Racers are the absolutely ideal introduction to the RC hobby for young and old and will turn any office or living room into a race track!
Made of super elastic plastic to absorb shocks well, high-grip off-road wheels and equipped with the finest technology, the vehicle leaves nothing to be desired. The "8520" coreless motor accelerates the RC car up to 20km/h. If this is too fast for you in the living room or children's room, you can also reduce the speed thanks to a rotary control nub.
Throttle/brake and steering commands are sensitively implemented in full proportion by the 2.4GHz remote control. Due to the modern transmission system, several vehicles can of course be driven at the same time. So nothing stands in the way of the mini Grand Prix at home!
The HIGHLIGHT is probably the built-in "ELECTRONIC STABILITY PROGRAM" (ESP) which keeps the rear-driven vehicle always well on track even on smooth surfaces such as laminate or tiled floors. Thanks to a built-in "gyro" as you also know from drones, the vehicle detect unnatural movements of the rear and steers automatically against it to prevent a breakaway (to a certain extent). However, if you still want to make wild drifts, you simply have to push the technology to its limits with your own driving skills, which is a lot of fun! On Top of that we add a set of drift wheels for carpet.
The removable 3.7V 300mAh LiPo battery is charged by a USB charger. The charging time is about 30-40 minutes and the driving time is about 20 minutes. Additional batteries are available for even more driving fun.
FEATURES:
- 2WD rear wheel drive
- 2.4GHz remote control
- Fully proportional control
- Maximum speed can be limited on the remote control
- Removable battery
SPECIFICATION:
- Servo: 3.7g Servo
- Motor: 8520 Coreless Motor
- Battery: 3.7V 300mAh LiPo Battery
- Speed throttleable: Yes
- ESP built in: Yes
- Charging time: approx. 30-40 minutes
- Driving time: approx. 20 minutes
- Dimensions (L/W/H): 185x85x70 mm
- Weight: 110 g
INCLUDED:
- 1:24 X-Racer Touring Car RTR
- 2.4GHz Remote Control
- 300mAh LiPo Battery
- USB Charger
- 1 Set Drift Wheels
- Manual
REQUIRED ACCESSORIES:
- 2* AA Batteries for Remote Control
ABSIMA 3-channel receiver suitable for CR2S(V2), CR3P and CR4T radio - Waterresistan
€ 29,99
3-channel receiver suitable for CR2S(V2), CR3P and CR4T radio - Waterresistant.
Specification:
- 2.4Ghz A.F.H.D.S. system
- 3-channel
- Water-resistant
- Failsafe function
- Measurement: 35 x 21 x 12mm
- Weight: 10g
- Voltage: 4,8V - 6,6V
Absima 3-kanal Fernsteuerung "cr3p" 2.4ghz Inkl. Empfänger - 2000002
€ 79,95
CPU Radios are every rc car or boat drivers dream! But whats your dream of? It's as much fuctions as possible, big display, stable transmission, nice design - but for an reasonable price! Here we go! Absima's CR3P!
Radio features:
- A.F.H.D.S. 2.4Ghz system
- 3-channel radio
- 3-channel receiver
- 10 model memories
- Servo reverse
- Dual rate
- EPA
- EXP
- ABS
We putted the steering wheel in an outstanding position to keep handling as comfortable as possible. Additionaly the trim levers position allows to set, without leaving the model unattended.
Receiver specification:
- 3-channel
- Water-resistant
- Failsave included
- Measurement:
- 35 x 21 x 12mm
- Weight: 11g
ABSIMA 3000 MINH 7.2V GREENHORN V2
€ 29,95
ABSIMA presents a new generation of powerful NiMH stickpacks. Outstanding power delivery, and a completely new race design. All battery packs are supplied pre-assembled and ready-to-use including a Deans (T-plug) connector and a Tamiya style adapter to make it most comfortable for the user. The high-quality cells have a single cell shrinkage and are fast-chargeable.
- Minimum capacity: 3000mAh
- Plug system: T-plug including Tamiya adapter
- High-quality single cell shrinkage
- Voltage: 7.2V
- Measure: 135x46x24 mm
- Weight: 325g
Absima 3000015 1:10 Shock absorber/tyre rack
€ 27,50
Absima 3000015 1:10 Shock absorber/tyre rack
| Dim | (L x W x H) 111 x 114 x 190 mm | |
|---|---|---|
| Height | 190 mm | |
| Length | 111 mm | |
| Width | 114 mm | |
| Scale | 1:10 | |
| Product type | Shock absorber/tyre rack |
