LAADKABEL 4MM GOLD PLUG.
24CM LANG.

LAADKABEL BEC

Laadkabel XT-60 2,5qmm²

Arikelnummer: 810037

LRP 2S-CHARGING LEAD - 60CM - XT60, XH TO 4/5MM, 2MM

LRP 2x 2s-charging Wire - 35cm - Xt60 & Xh | 4/5mm & 2mm

LRP Double-charging lead - 4mm/5mm 2S LiPo Hardcase incl. XH

LRP LiPo Safe Charging Bag, 23 x 30 cm replaces 65845

LRP universal charging lead - Futaba rx / tx plug

LRP universal charging lead - Sanwa / Graupner / JR - rx / t

MODSTER Basic Charger AA-AAA incl. 4x rechargeable batteries Ultra Power AA Mignon 2200mAh NiMH

MODSTER Charger AC 60 Charger LiPo 2-4S 6A 60W with integrated power supply

MODSTER 60 Charger - the ideal extension for every RTR model

It is perfect for any enthusiast looking for a powerful and affordable charger.

The Modster 60 Charger can charge and discharge common batteries:

- LiPo,

- LiFe,

- LiHV,

- NiCd,

- NiMH

- Lead batteries

Thanks to the 60 Watt charging power, charging currents of 0.1 - 6 Amps can be set and a 4S LiPo battery can be charged with up to 4A.

An additional feature is the integrated USB port for charging mobile phones, tablets or other devices.

The easy and intuitive menu structure includes a function to display the internal resistance of each cell in the LiPo pack.

The memory function allows you to save and recall up to 10 profiles for more convenience.

A 230V AC mains cable and a T-plug charging cable are included in the scope of delivery.

Features
- Input voltage: AC 100-240V
- Charging power: 60W
- Discharge power: max. 10W
- Charging current: 0.1-6A
- Discharge current: 0.1-2A
- LiPo/LiIon/LiFe/LiHV cells: 2-4
- NiCd/NiMH cells: 6-8
- PB cells: 6-12V
- T-Plug charging cable
- German/English manual

This starter set is the ideal carefree package for getting started in the RC hobby. NiMH batteries are very robust and resistant and are ideal for BRUSHED RC cars. Thanks to the user-friendly operation (plug and play), this set is also perfect for beginners.
 
Charger specification:
 
Charging current: 800mAh
Operating voltage: 100-240V
Battery type: NiMH 1-9 cells / 1.2V-10.8V
Power supply type: integrated power supply
Charging control: Status LEDs (red/green)
Delta peak switch-off
Dimensions (L/W/H): 100x61x30mm 
Weight: 100g
 
Battery specification:
 
Suitable for 1:10 RC cars (almost all types)
Battery type: NiMH
Capacity: 3000mAh
Voltage: 6 cells / 7.2V
Power cable/plug: 12AWG silicone cable/Tamiya plug
Dimmensions (L/W/H): 135x46x25mm
Weight: +/- 325g
 
Scope of delivery:
 
1* NC-1 charger
1* NiMH Racing Pack 3000mAh
1* Adapter T-plug/Tamiya

The Raytronic C30 + 300W was designed to offer an intelligent pocket charger with high performance and very simple operation. RAYTRONIC C30 + allows charging and discharging common types of cells (NiCd, NiMH, LiPo, LiHV Li-ion, LiFe, Pb), in addition it is equipped with a built-in six-channel balancer, which ensures safe and comfortable charging of lithium batteries. Measurement of voltage and internal resistance of individual cells (for lithium batteries) is a matter of course.

Features:

• Input supply voltage 10 - 26 V DC (socket XT60)
• For charging and discharging 1 - 16 NiCd / NiMH cells, 1 - 6 Li-ion / LiPo / LiHV / LiFe cells or 2- 20 V lead-acid batteries
• Adjustable charging current (0.1 A - 12.0 A)
• Adjustable discharge current (0.1 A - 3.0 A)
• Max. power for charging 300 W, for discharging 5 W
• Termination of charging using delta-peak automation for NiCd and NiMH batteries
• Lithium and Pb batteries are charged using the "constant current / constant voltage" method
• Adjustable delta-peak detection sensitivity for NiCd and NiMH batteries
• Adjustable end voltage for charging and discharging for lithium batteries
• Repeated cyclic operation of charging / discharging or discharging / charging for NiCd and NiMH batteries, up to 5 cycles
• Four charging modes for lithium batteries - normal charging, fast charging, balancing charging and storage charging / discharging
• Stop charging when the set time or the supplied charge is exceeded.
• Memory for 5 charging / discharging programs.
• Measurement of the total voltage of the set and individual cells (for lithium batteries)
• Measurement of the total internal resistance of the set and individual cells (for lithium batteries)
• The XT60 power output socket and the JST-XH 2-6S universal balancer socket allow you to connect the rechargeable battery directly without the need for a charging cable and balancer adapter (if the kit is equipped with an XT60 power connector and a JST-XH service connector)
• Two-line backlit LCD display with simple and clear menu and display of parameters during charging / discharging
• A number of warning text messages contribute to safe operation - incorrect input voltage, incorrect connection, unsuitable battery or its condition, incorrect polarity at the output
• Reverse polarity and short circuit protection at the output / li>
• Compact plastic case, small dimensions
• Built-in fan for forced cooling

Specifications:

Powerful stabilised switched-mode power supply Raytronic P20 with adjustable output voltage and current limit is perfect for powering modeller's chargers with power up to 300W and other electronic devices. It is suitable for testing electronic devices that have to be powered by 6–15V DC.

The power supply is equipped with protection circuits that protect it from short-circuit on input or from overloading. There is an active cooling system, which stabilises operating conditions and protects from overheating.

Output voltage and current limit are adjusted via knobs on the front panel - values of output voltage or current are shown on 3-digit LED display (choose between current and voltage via switch).

Thanks to an adjustable output voltage and current limit you can use the power source as a charger for batteries that need constant voltage/constant current charging mode (such as acid-lead or Li-Fe batteries, other than A123® with different chemicals and charging behaviour. Common modeller's chargers specialized for A123® cells can end the charging too soon (or completely ignore the cells) etc.
 

Specifications:

Includes:

• Raytronic P20 power supply
• Power cable
• User manual

Product information "Robitronic Expert LD 100 Charger LiPo 2-4s 10A 100W"

The Expert LD 100 Charger is a multi-function charger/discharger that allows you to use the most popular battery types such as LiPo/LiHV/Lilon/LiFe/NiCd/NiMH/Pb.
With a remarkable 100 watts of charging power and a maximum of  10A charging current, the Expert LD 100 charger offers more than sufficient charging power for most applications in a compact design.

On the front there is a built-in XT60 plug where you can easily connect your battery or charging cable reverse polarity protected.
Information about settings and running process can be obtained via the backlit LCD display.
The Expert LD 100 is the perfect multifunction charger and the right choice for most modeller.

Features:

• Compact design
• 100 watts charging power, max. 10A charging current
• Suitable for: LiPo/LiFe/LiIon/LiHV/NiMH/NiCd/Pb
• Easy handling and navigation with four buttons
• Informative LCD display with backlight
• Built-in XT60 connector on the front panel
• 5 batteries profile memory
• Integrated balancer with max. 300mA current
• Various security settings (delta peak sensitivity, auto charge current limit, capacity limit, temperature limit, process time limit, automatic fan)

Technical Specifications:

Delivery:

1x Expert LD 100 charger
1x Power cord
1x Charging cable Tamiya-connector
1x Charging cable T-connector
1x Manual

Optional Accessories:

SkyRC Temperature Sensor (SK600040)

Product information "Robitronic Expert LD 20 Charger NiMh 4-8 cells 2A"

Delta Peak charger for 4-8cell NiMH and NiCd batteries with a capacity from 2000mAh up to 6000mAh. The charging time for a 3000mAh batterie is around 90 minutes.

Technical Specifications

RUDDOG 2S Charging Lead 60cm (4/5mm,2mm)(7PIN-XH,XT60)