There are no products in your shopping cart yet.
Eclipse 5 PARTS
3 / 5
Loading...
RIPTECH RC - TI UPPER SCREW KIT - ECLIPSE 5
€ 27,50
RipTech Performance titanium screw kits
Why Titanium? The standout feature of these titanium screw kits is their approximate 45% weight saving over standard steel screws. Titanium is renowned for its exceptional strength-to-weight ratio, making it the ideal choice for competitive RC racing. Shedding excess weight allowing for a better balance and lower COG for quicker acceleration, improved cornering, and increased overall speed.
Content: The kits includes all the top side screws you'll need for your car (please note: it does not include under chassis screws as they are not required for performance), ensuring a hassle-free upgrade process.
Improved Handling: The reduced weight provided by our titanium screws enhances your cars balance and responsiveness. Your car will corner sharper, accelerate faster, and maintain better stability, giving you the competitive edge you've been looking for.
Precision Craftsmanship: Our screws are machined to perfection, guaranteeing consistent quality and performance.
Proven Results: RC racers have experienced significant performance improvements with our titanium screws.
Easy Installation: Replace your stock screws with our titanium ones using standard RC 2mm hex tool.
Images are to show product only, quantity and size will vary to your specified kit.
Sanwa Servo Spacer pr - E1-E6
€ 14,95
Sanwa Servo Spacer pr - E1-E6
This pair of 1mm spacers provides an easy solution to assembling the Sanwa SRG-HR into an Eclipse 2 kit. It provides multiple useful functions;- M3 nuts can be placed into the spacer and held in place easily during assembly, with no need for a
nut runner / spanner to secure.
- Because of this, servo can be placed centrally far easier, using only a hex driver.
- Raising the servo up to ensure all common servo savers don’t protrude underside of the chassis.
SCHUMACHER Alloy Rear Wheel Screws pk6 - A1-A3,E1-E6
€ 5,95
SCHUMACHER Alloy Rear Wheel Screws pk6 - A1-A3,E1-E6
For the Eclipse, Atom or any other LMP12 or GT12 car a new lightweight aluminium wheel screw. Specially designed to have a small head enabling them to fit all LMP12 wheels. Especially useful 2mm hex head rather than the usual 2.5mm so you can discard one tool from your box or work area.
SCHUMACHER BALL BEARING - 1/4X3/8X1/8 FLANGED YELLOW - (PR)
€ 4,99
BALL BEARING - 1/4X3/8X1/8 FLANGED YELLOW - (PR)
Schumacher C/F Front End Spacer 1.0mm - Eclipse 5 (4pcs)
€ 6,50
Schumacher C/F Front End Spacer 1.0mm - Eclipse 5 (4pcs)
SCHUMACHER CHASSIS POST 8MM PR - E3-E5,ICON/2,A3,FT8
€ 5,95
CHASSIS POST 8MM PR - E3-E5,ICON/2,A3,FT8
SCHUMACHER Front Springs White - Ultra pr - A1/A3,E2-E5
€ 5,95
SCHUMACHER Front Springs White - Ultra pr - A1/A3,E2-E5
SCHUMACHER M3 Brass Black Thread Inserts - pk10
€ 5,50
SCHUMACHER M3 Brass Black Thread Inserts - pk10
SCHUMACHER MASS DAMPER SET
€ 29,95
The Schumacher mass damper will reduce the effect small bumps have on the car. Changing the mass and oil used will alter the amount of damping.
The tuned mass damper will move out of phase with the vibrations caused by bumps. This helps to keep the tyres in contact with the track , offering improved traction and lap times. This also helps with improved curb riding capability.
Use either the 23g or 12g mass depending on track conditions.
Use the shims to alter the preload on the springs. We recommend using FOUR shims.
Fill the damper shaft with oil until it comes out of all the holes, then spread it around the shaft.
Can be used on any car where space allows it to be fixed to the chassis.
Includes 4 pairs of springs for different tuning.
Mass Damper Spring Chart
U8183 - Silver - Super Soft (pr)
U8182 - Yellow - Soft (pr)
U8130 - Red - Medium (pr)
U8131 - Green - Hard (pr)