There are no products in your shopping cart yet.
ABSIMA
4 / 12
Loading...
ABSIMA 7.4V 500mAh Li-Lion battery - AB30-DJ02
€ 17,50
ABSIMA 7.4V 500mAh Li-Lion battery
For Absima 1/16 scale RC cars
ABSIMA 7.4V 800mAh Battery Li-ion - AB30-DJ03
€ 29,95
ABSIMA 7.4V 800mAh Li-Lion battery
For Absima 1/16 scale RC cars
ABSIMA Aluminium Servohorn 25T
€ 7,95
- 25 teeth
- Single sided design
- Suitable for Absima, Savöx, Futaba, Bluebird, ThunderTiger, Spektrum
- Length 29 mm
- Color gunmetal
ABSIMA Ball End Opener 4.3/4.8
€ 9,95
Features:
- Release the ball cups from the studs without damaging the material
- 4.3 und 4.8 mm
Features:
- Release the ball cups from the studs without damaging the material
- 4.3 und 4.8 mm
ABSIMA BOOSTER ADB 1.4 DESERT BUGGY
€ 324,95
- 4WD all-wheel drive
- 2.4GHz remote control
- Extremely durable composite plastic parts
- Fully adjustable suspension
- Ball bearing drive
- Adjustable 16mm aluminum big bore shocks
- Steel differential outputs
- Aluminum chassis plate
- Adjustable upper suspension arms
- 5mm aluminum motor mount
- 5mm aluminum shock towers
- Aluminum driveshaft
- 2 CNC cone differentials (front/rear)
- LED light bar front and rear
- Extremely detailed body with add-on parts
- Vehicle should be powered by 2-cell (2S) LiPo battery pack
- Scale: 1:10
- Dimensions (L/W/H): 515x320x170 mm
- Weight: 2550g
- Wheelbase: 290mm
- Ground clearance: approx. 50mm
- Track width: 245mm front / 240mm rear
- Wheels front/rear Ø: 128mm / Width: 55mm
- Damper oil: 400CPS
- Damper installation length: 80mm
- Motor ratio brushless version: Pinion: 21T / Main gear: 77T (48dp)
- Dessert Buggy "ADB1.4" Brushless Version
- 2.4GHz Remote Control CR2SV2
- Mini tool kit
- Instruction manual
ABSIMA Brushless Regler "Thrust A10 ECO" 50A 1:10 waterdicht 2110007
€ 64,95
€ 54,95
Brushless Regler "Thrust A10 ECO" 50A 1:10 waterdicht 2110007
ABSIMA Charger "CUBE 2.0" NiMH/LiPo - 4000033
€ 32,95
FEATURES:
A "easy-to-use" charger which is especially suitable for beginners. The uncomplicated setting options make it easy to operate and it`s suitable for LiPo/LiFe and NiMH/NiCd batteries.
The unit features a selectable charging rate, delta-peak sensitive cut-off and cell balancing of LiPo/LiFe batteries.
AC power cable available with Euro pin plug (4000033) and UK plug (4000033UK)
SPECIFICATION:
- Input voltage: 100-240V AC
- Charging current: 1.0A / 3.0A / 5.0A (50W)
- Charging output: 4mm sockets
- LED for battery type identification and status
- LiPo/LiFe batteries: 2-3S
- NiMH/NiCd: 1-8 cells
- Balancing current: 350mAh
- Delta-peak sensitive
- Internal power suply
- Dimmension: 110x109x49 mm
- Weight: 490 g
SCOPE OF DELIVERY:
- Cube 2.0 Charger
- AC power cable
- LiPo/LiFe balancing board
- Charging cable with T-plug
- Charging cable with Tamiya plug
- Manual
ABSIMA Countersunk Screw set
€ 14,95
Features: All common countersunk screws you need for a 1/8 & 1/10 scale car.
Contains:
- 10 x Countersunk screw M3*10
- 10 x Countersunk screw M3*12
- 10 x Countersunk screw M3*14
- 10 x Countersunk screw M3*15
- 10 x Countersunk screw M3*16
- 10 x Countersunk screw M3*18
- 10 x Countersunk screw M3*35
- 10 x Countersunk screw M4*10
- 10 x Countersunk screw M4*14
- 10 x Countersunk screw M4*16