There are no products in your shopping cart yet.
schumacher rc racing parts
4 / 20
Loading...
Ceramic Bearing 1/8x5/16x9/64 Flanged (pr)SCHUMACHER
€ 12,50
Ceramic Bearing 1/8x5/16x9/64 Flanged (pr)SCHUMACHER
Schumacher Bearing Guidlines
Yellow = ABEC5, oil filled, shielded, steel balls recommended for relatively clean conditions. Schumacher On Road cars kit specification.
Red = ABEC5, grease filled, double rubber seals, steel balls recommended for wet or dirty conditions. Schumacher Off Road cars kit specification.
Orange or Grey = ABEC 5, oil filled, shielded, extra hard ceramic balls for higher efficiency. Recommended for On Road.
Black = Pro High Precision German or Japanese manufactured, rubber seal. Recommended for Off Road.
Metal = Pro High Precision German or Japanese manufactured, shielded. Recommended for On Road.
CLOSED CELL INSERTS SHORT COURSE-1/8TH BUGGY PR
€ 9,95
This new closed cell foam insert from Schumacher is a must try for any 1/8th Buggy or Short Course runner. A black medium compound provides great impact absorption and low lateral movement for great stability on the track. Sold in pairs.
Contact 1/12 Universal Truer Arbor
€ 24,95
Contact 1/12 Universal Truer Arbor
From Contact RC is this universal tyre truing adaptor for popular tyre truers including the J015 - Contact Tyre Truer - V3 spec and J017 - Contact Tyre Truer with Bag V3 spec or any truer with an 8mm output shaft.This adaptor is suitable for 1/12th or GT12 front tyres, 3 bolt 1/12th or GT12 tyres and hex fitting 1/12th or GT12 tyres.
The locking nut for both types ensure a snug, true fit.
CONTACT GT12-1/12 FRONT T FOAM 32SH - 44MM
€ 9,95
Our Multiple European Championship winning Contact RC 'T' foam is now available in a softer shore rating of 32.
The 32 shore version will be a good option on lower grip tracks or club races on non-permanent tracks.
T foam is the most complete 1/12th tyre in the Contact RC range. It benefits from performance and lap times equal or better than Q foam, with the added benefit of being easier to drive, less twitchy and easy to attack the track with. This often leads to improved lap times. It also has much better durability, lower wear rates (close to A foam) and when using the non-oil type additives, keeps grip to the end of the race much better than our other options.
Available in standard 3 bolt rear, 12mm hex fitting rear and standard bearing fit 1/12th/GT12 front.
CONTACT RC - NEOPRENE BAG
€ 14,99
Neoprene, zip up bags to protect your set up board during transportation. With cool branded look!
40x30cm
Also make great laptop bags.
CORE RC - 522 PRO TYRE GLUE + 2 NOZZLES
€ 6,50
Especially developed by Schumacher's leading drivers together with industry glue experts this Core RC 522 Pro tyre glue is perfect for tyre gluing and a host of other applications. Perfect viscosity, not too thick, not too thin. 20g bottle with special non stick lid and 2 ultra fine nozzles
CORE RC 4 Way Wrench Large 4.0, 5.5, 7.0, 8.0mm
€ 13,95
CORE RC 4 Way Wrench Large 4.0, 5.5, 7.0, 8.0mm
Again from CORE RC this large style 4 way wrench.Weighted for those tougher operations, with 4, 5.5, 7 and 8mm sizes
- Solid oversize design.
- 4, 5.5, 7 and 8mm.
- Cool CORE RC branding.
CORE RC 5.5" BALL LINK TOOL
€ 9,95
CORE RC 5.5" HELICOPTER BALL LINK PLIER
VOOR HET LOS HALEN VAN KOGELKOPPEN.
CORE RC ALLOY MOTOR SPACER - 1MM - PK2
€ 6,95
CORE RC alloy 1mm motor spacer, allows the motor to be moved to improve balance. Pack of two that can be used together to get 2mm of movement
CORE RC Aluminium 5.5mm Nut Thumb Driver
€ 8,95
CORE RC Aluminium 5.5mm Nut Thumb Driver
This easy to use thumb driver is a comfortable diameter, lightweight, with a knurled surface making those quick nut removals super easy.Seen here being used on Michal Orlowski's Cougar LD3, its great for 5.5mm (M3) shock nuts.
- 5.5mm (M3)
- Black Anodised with CORE RC branding.
- Lightweight and compact.
- Laser etched tool size for easy identification.
CORE RC DRIVESHAFT CLIP PLIERS
€ 9,95
CORE RC Driveshaft clip pliers especially for the assembly of Mi9 driveshafts, but can also be used for other brands and circlip applications.
Cool look and CORE RC branding.
CORE RC Hi Response TC Spring 2.1 - Red
€ 7,95
CORE RC Hi Response TC Spring 2.1 - Red
CORE RC Hi Response springs for 1/10th Touring and FWD cars.Developed by Schumacher engineers and high level drivers, these new springs bring a new dimension to 1/10th Touring.
These springs have been designed to improve responsiveness of the cars compared to the competition.
Featuring less coils and having a thinner wire diameter they offer over a 40% weight saving over the competition, a significant 5.2g per set of 4.
CORE RC provide a wide linear range from 1.9 N/mm to 3.5 N/mm and also a progressive spring measuring 2.2-2.9
19mm in length.
Three easy to buy, pairs of 4 are available as sets;
CR852 Soft; including 1 pair of 1.9, 2.1, 2.3 and 2.2-2.9 progressive.
CR853 Medium; including 1 pair of 2.5, 2.6, 2.7 and 2.8
CR854 Hard; including 1 pair or 2.9, 3.1, 3.3 and 3.5
CORE RC Hi Response TC Spring 2.2-2.9 Brown
€ 7,95
CORE RC Hi Response springs for 1/10th Touring and FWD cars.
Developed by Schumacher engineers and high level drivers, these new springs bring a new dimension to 1/10th Touring.
These springs have been designed to improve responsiveness of the cars compared to the competition.
Featuring less coils and having a thinner wire diameter they offer over a 40% weight saving over the competition, a significant 5.2g per set of 4.
CORE RC provide a wide linear range from 1.9 N/mm to 3.5 N/mm and also a progressive spring measuring 2.2-2.9
19mm in length.
Three easy to buy, pairs of 4 are available as sets;
CR852 Soft; including 1 pair of 1.9, 2.1, 2.3 and 2.2-2.9 progressive.
CR853 Medium; including 1 pair of 2.5, 2.6, 2.7 and 2.8
CR854 Hard; including 1 pair or 2.9, 3.1, 3.3 and 3.5
CORE RC Hi Response TC Spring 2.3 - Green
€ 7,95
CORE RC Hi Response springs for 1/10th Touring and FWD cars.
Developed by Schumacher engineers and high level drivers, these new springs bring a new dimension to 1/10th Touring.
These springs have been designed to improve responsiveness of the cars compared to the competition.
Featuring less coils and having a thinner wire diameter they offer over a 40% weight saving over the competition, a significant 5.2g per set of 4.
CORE RC provide a wide linear range from 1.9 N/mm to 3.5 N/mm and also a progressive spring measuring 2.2-2.9
19mm in length.
Three easy to buy, pairs of 4 are available as sets;
CR852 Soft; including 1 pair of 1.9, 2.1, 2.3 and 2.2-2.9 progressive.
CR853 Medium; including 1 pair of 2.5, 2.6, 2.7 and 2.8
CR854 Hard; including 1 pair or 2.9, 3.1, 3.3 and 3.5