CONTACT GT12-1/12 FRONT T FOAM 32SH - 44MM

Our Multiple European Championship winning Contact RC 'T' foam is now available in a softer shore rating of 32.

The 32 shore version will be a good option on lower grip tracks or club races on non-permanent tracks.

T foam is the most complete 1/12th tyre in the Contact RC range. It benefits from performance and lap times equal or better than Q foam, with the added benefit of being easier to drive, less twitchy and easy to attack the track with. This often leads to improved lap times. It also has much better durability, lower wear rates (close to A foam) and when using the non-oil type additives, keeps grip to the end of the race much better than our other options.

Available in standard 3 bolt rear, 12mm hex fitting rear and standard bearing fit 1/12th/GT12 front.

CONTACT RC - NEOPRENE BAG

Neoprene, zip up bags to protect your set up board during transportation. With cool branded look!
 

40x30cm

Also make great laptop bags.

CORE RC - 522 PRO TYRE GLUE + 2 NOZZLES

Especially developed by Schumacher's leading drivers together with industry glue experts this Core RC 522 Pro tyre glue is perfect for tyre gluing and a host of other applications. Perfect viscosity, not too thick, not too thin. 20g bottle with special non stick lid and 2 ultra fine nozzles

CORE RC 1/12 Servo Saver 25T Futaba

CORE RC 1/12 Servo Saver 25T Futaba

CORE RC 4 Way Wrench Large 4.0, 5.5, 7.0, 8.0mm

CORE RC 4 Way Wrench Large 4.0, 5.5, 7.0, 8.0mm

Again from CORE RC this large style 4 way wrench.

Weighted for those tougher operations, with 4, 5.5, 7 and 8mm sizes

- Solid oversize design.
- 4, 5.5, 7 and 8mm.
- Cool CORE RC branding.

CORE RC 5.5" BALL LINK TOOL

CORE RC 5.5" HELICOPTER BALL LINK PLIER

VOOR HET LOS HALEN VAN KOGELKOPPEN.

CORE RC ALLOY MOTOR SPACER - 1MM - PK2

CORE RC alloy 1mm motor spacer, allows the motor to be moved to improve balance. Pack of two that can be used together to get 2mm of movement

CORE RC Aluminium 5.5mm Nut Thumb Driver

CORE RC Aluminium 5.5mm Nut Thumb Driver

This easy to use thumb driver is a comfortable diameter, lightweight, with a knurled surface making those quick nut removals super easy.

Seen here being used on Michal Orlowski's Cougar LD3, its great for 5.5mm (M3) shock nuts.

- 5.5mm (M3)
- Black Anodised with CORE RC branding.
- Lightweight and compact.
- Laser etched tool size for easy identification.

CORE RC DRIVESHAFT CLIP PLIERS

CORE RC Driveshaft clip pliers especially for the assembly of Mi9 driveshafts, but can also be used for other brands and circlip applications.

Cool look and CORE RC branding.

CORE RC Hi Response TC Spring 2.1 - Red

CORE RC Hi Response TC Spring 2.1 - Red

CORE RC Hi Response springs for 1/10th Touring and FWD cars.

Developed by Schumacher engineers and high level drivers, these new springs bring a new dimension to 1/10th Touring.

These springs have been designed to improve responsiveness of the cars compared to the competition.

Featuring less coils and having a thinner wire diameter they offer over a 40% weight saving over the competition, a significant 5.2g per set of 4.

CORE RC provide a wide linear range from 1.9 N/mm to 3.5 N/mm and also a progressive spring measuring 2.2-2.9

19mm in length.

Three easy to buy, pairs of 4 are available as sets;

CR852 Soft; including 1 pair of 1.9, 2.1, 2.3 and 2.2-2.9 progressive.
CR853 Medium; including 1 pair of 2.5, 2.6, 2.7 and 2.8
CR854 Hard; including 1 pair or 2.9, 3.1, 3.3 and 3.5

CORE RC Hi Response TC Spring 2.2-2.9 Brown

CORE RC Hi Response springs for 1/10th Touring and FWD cars.

Developed by Schumacher engineers and high level drivers, these new springs bring a new dimension to 1/10th Touring.

These springs have been designed to improve responsiveness of the cars compared to the competition.

Featuring less coils and having a thinner wire diameter they offer over a 40% weight saving over the competition, a significant 5.2g per set of 4.

CORE RC provide a wide linear range from 1.9 N/mm to 3.5 N/mm and also a progressive spring measuring 2.2-2.9

19mm in length.

Three easy to buy, pairs of 4 are available as sets;

CR852 Soft; including 1 pair of 1.9, 2.1, 2.3 and 2.2-2.9 progressive.
CR853 Medium; including 1 pair of 2.5, 2.6, 2.7 and 2.8
CR854 Hard; including 1 pair or 2.9, 3.1, 3.3 and 3.5

CORE RC Hi Response TC Spring 2.3 - Green

CORE RC Hi Response springs for 1/10th Touring and FWD cars.

Developed by Schumacher engineers and high level drivers, these new springs bring a new dimension to 1/10th Touring.

These springs have been designed to improve responsiveness of the cars compared to the competition.

Featuring less coils and having a thinner wire diameter they offer over a 40% weight saving over the competition, a significant 5.2g per set of 4.

CORE RC provide a wide linear range from 1.9 N/mm to 3.5 N/mm and also a progressive spring measuring 2.2-2.9

19mm in length.

Three easy to buy, pairs of 4 are available as sets;

CR852 Soft; including 1 pair of 1.9, 2.1, 2.3 and 2.2-2.9 progressive.
CR853 Medium; including 1 pair of 2.5, 2.6, 2.7 and 2.8
CR854 Hard; including 1 pair or 2.9, 3.1, 3.3 and 3.5

CORE RC Hi Response TC Spring 2.5 - Blue

CORE RC Hi Response springs for 1/10th Touring and FWD cars.

Developed by Schumacher engineers and high level drivers, these new springs bring a new dimension to 1/10th Touring.

These springs have been designed to improve responsiveness of the cars compared to the competition.

Featuring less coils and having a thinner wire diameter they offer over a 40% weight saving over the competition, a significant 5.2g per set of 4.

CORE RC provide a wide linear range from 1.9 N/mm to 3.5 N/mm and also a progressive spring measuring 2.2-2.9

19mm in length.

Three easy to buy, pairs of 4 are available as sets;

CR852 Soft; including 1 pair of 1.9, 2.1, 2.3 and 2.2-2.9 progressive.
CR853 Medium; including 1 pair of 2.5, 2.6, 2.7 and 2.8
CR854 Hard; including 1 pair or 2.9, 3.1, 3.3 and 3.5

CORE RC Hi Response TC Spring 2.6 - Black

CORE RC Hi Response springs for 1/10th Touring and FWD cars.

Developed by Schumacher engineers and high level drivers, these new springs bring a new dimension to 1/10th Touring.

These springs have been designed to improve responsiveness of the cars compared to the competition.

Featuring less coils and having a thinner wire diameter they offer over a 40% weight saving over the competition, a significant 5.2g per set of 4.

CORE RC provide a wide linear range from 1.9 N/mm to 3.5 N/mm and also a progressive spring measuring 2.2-2.9

19mm in length.

Three easy to buy, pairs of 4 are available as sets;

CR852 Soft; including 1 pair of 1.9, 2.1, 2.3 and 2.2-2.9 progressive.
CR853 Medium; including 1 pair of 2.5, 2.6, 2.7 and 2.8
CR854 Hard; including 1 pair or 2.9, 3.1, 3.3 and 3.5

CORE RC Hi Response TC Spring 2.7 - Orange

CORE RC Hi Response springs for 1/10th Touring and FWD cars.

Developed by Schumacher engineers and high level drivers, these new springs bring a new dimension to 1/10th Touring.

These springs have been designed to improve responsiveness of the cars compared to the competition.

Featuring less coils and having a thinner wire diameter they offer over a 40% weight saving over the competition, a significant 5.2g per set of 4.

CORE RC provide a wide linear range from 1.9 N/mm to 3.5 N/mm and also a progressive spring measuring 2.2-2.9

19mm in length.

Three easy to buy, pairs of 4 are available as sets;

CR852 Soft; including 1 pair of 1.9, 2.1, 2.3 and 2.2-2.9 progressive.
CR853 Medium; including 1 pair of 2.5, 2.6, 2.7 and 2.8
CR854 Hard; including 1 pair or 2.9, 3.1, 3.3 and 3.5

CORE RC Hi Response TC Spring 2.8 - Yellow

CORE RC Hi Response springs for 1/10th Touring and FWD cars.

Developed by Schumacher engineers and high level drivers, these new springs bring a new dimension to 1/10th Touring.

These springs have been designed to improve responsiveness of the cars compared to the competition.

Featuring less coils and having a thinner wire diameter they offer over a 40% weight saving over the competition, a significant 5.2g per set of 4.

CORE RC provide a wide linear range from 1.9 N/mm to 3.5 N/mm and also a progressive spring measuring 2.2-2.9

19mm in length.

Three easy to buy, pairs of 4 are available as sets;

CR852 Soft; including 1 pair of 1.9, 2.1, 2.3 and 2.2-2.9 progressive.
CR853 Medium; including 1 pair of 2.5, 2.6, 2.7 and 2.8
CR854 Hard; including 1 pair or 2.9, 3.1, 3.3 and 3.5

CORE RC Hi Response TC Spring 2.9 - Purple

CORE RC Hi Response springs for 1/10th Touring and FWD cars.

Developed by Schumacher engineers and high level drivers, these new springs bring a new dimension to 1/10th Touring.

These springs have been designed to improve responsiveness of the cars compared to the competition.

Featuring less coils and having a thinner wire diameter they offer over a 40% weight saving over the competition, a significant 5.2g per set of 4.

CORE RC provide a wide linear range from 1.9 N/mm to 3.5 N/mm and also a progressive spring measuring 2.2-2.9

19mm in length.

Three easy to buy, pairs of 4 are available as sets;

CR852 Soft; including 1 pair of 1.9, 2.1, 2.3 and 2.2-2.9 progressive.
CR853 Medium; including 1 pair of 2.5, 2.6, 2.7 and 2.8
CR854 Hard; including 1 pair or 2.9, 3.1, 3.3 and 3.5

CORE RC Hi Response TC Spring 3.1 - Grey

CORE RC Hi Response springs for 1/10th Touring and FWD cars.

Developed by Schumacher engineers and high level drivers, these new springs bring a new dimension to 1/10th Touring.

These springs have been designed to improve responsiveness of the cars compared to the competition.

Featuring less coils and having a thinner wire diameter they offer over a 40% weight saving over the competition, a significant 5.2g per set of 4.

CORE RC provide a wide linear range from 1.9 N/mm to 3.5 N/mm and also a progressive spring measuring 2.2-2.9

19mm in length.

Three easy to buy, pairs of 4 are available as sets;

CR852 Soft; including 1 pair of 1.9, 2.1, 2.3 and 2.2-2.9 progressive.
CR853 Medium; including 1 pair of 2.5, 2.6, 2.7 and 2.8
CR854 Hard; including 1 pair or 2.9, 3.1, 3.3 and 3.5

CORE RC Hi Response TC Spring 3.3 - Pink

CORE RC Hi Response springs for 1/10th Touring and FWD cars.

Developed by Schumacher engineers and high level drivers, these new springs bring a new dimension to 1/10th Touring.

These springs have been designed to improve responsiveness of the cars compared to the competition.

Featuring less coils and having a thinner wire diameter they offer over a 40% weight saving over the competition, a significant 5.2g per set of 4.

CORE RC provide a wide linear range from 1.9 N/mm to 3.5 N/mm and also a progressive spring measuring 2.2-2.9

19mm in length.

Three easy to buy, pairs of 4 are available as sets;

CR852 Soft; including 1 pair of 1.9, 2.1, 2.3 and 2.2-2.9 progressive.
CR853 Medium; including 1 pair of 2.5, 2.6, 2.7 and 2.8
CR854 Hard; including 1 pair or 2.9, 3.1, 3.3 and 3.5

CORE RC Hi Response TC Spring Set - Hard

CORE RC Hi Response springs for 1/10th Touring and FWD cars.

Developed by Schumacher engineers and high level drivers, these new springs bring a new dimension to 1/10th Touring.

These springs have been designed to improve responsiveness of the cars compared to the competition.

Featuring less coils and having a thinner wire diameter they offer over a 40% weight saving over the competition, a significant 5.2g per set of 4.

CORE RC provide a wide linear range from 1.9 N/mm to 3.5 N/mm and also a progressive spring measuring 2.2-2.9

19mm in length.

Three easy to buy, pairs of 4 are available as sets;

CR852 Soft; including 1 pair of 1.9, 2.1, 2.3 and 2.2-2.9 progressive.
CR853 Medium; including 1 pair of 2.5, 2.6, 2.7 and 2.8
CR854 Hard; including 1 pair or 2.9, 3.1, 3.3 and 3.5