• Release the ball cups from the studs without damaging the material
• 4.3 und 4.8 mm
  Features:
• Release the ball cups from the studs without damaging the material
• 4.3 und 4.8 mm

Hudy Pit Mat Full Color 650x950mm

Hudy Cleaning Brush - Extra Resistant - 2.0"

LRP CONVEYOR DUCT FOR 30MM FANS, ROUND

LRP CONVEYOR DUCT FOR 40MM FANS, ROUND

LRP WORKSTEAM HIGHREV. MOTOR FAN 40X40X10MM - 1S/2S - RECEIVER CONNECTOR

LRP WORKSTEAM HIGHREV. MOTOR FAN 30X30X10MM - 1S/2S - RECEIVER CONNECTOR

T-Works Heatsink Gold Connector Set 4mm - Red/Black

T-Works Heatsink Gold Connector Set 4mm - Black/Black

T-Works Heatsink Gold Connector Set 5mm - Black/Black

Xtreme Italia FWD Body (clear) 0,7mm

LRP LiPo Hardcase adapter wire - 4mm male plug to Tamiya 90d

LRP Lipo Hardcase adapter wire (4mm plug to Deans)

ALUMINUM SOLID AXLE BLUE FOR TAMIYA M05 M06

Yeah Racing (#M05-013BK) Aluminum Motor Mount with Heat Sink Full Set (BK) for Tamiya M05 & M05 Pro.

• Great upgrade for the standard plastic parts or to replace broken parts
• Less flexing than standard parts
• Made of high quality aluminum
• Long lasting & durable
• Make your car looks stunning
• Easy to fit, straight forward replacement

Feature:

• For: Tamiya M05 & M05 Pro
• Material: Aluminum
• Color: Black

Include:

• Motor Mount (1 Pc)
• Heat Sink (1 Pc)
• Screws (2 Pcs)

M05 aluminium motorsteun blauw

Voor een optimale koeling

M05/M06 Aluminium fusee achter

Deze achterste fusees hebben een toespoor van 1°. Het fusee geeft het M-05 chassis een totale hoek van 1° en het M-06 chassis een algemene hoek van 2,5°. Ze zijn gemaakt van blauw-geanodiseerd aluminium en zorgen ervoor dat handling enrijeigenschappen verbetert worden.

Specificaties en functies:
- Compatibel met M-05, M-05Ra, M- 05 PRO, M-06, en M-06 PRO chassis.
- Voor het M-05, M-05Ra, M-06, en het M-06 PRO chassis is artikel 51239 (1050 kogellagers) noodzakelijk.

Tamiya nummer: 54327

These are optional hollow carbon gear shafts for the M03, M04,M05,M06 and FF02 chassis cars.

FEATURES:

• Features carbon fiber construction for lightweight performance.
• Transmits the motor power to the wheels efficiently.

INCLUDES:

• One 20mm carbon gear shaft
• One 40mm carbon gear shaft

REQUIRES: Eight 5x11mm bearings

COMMENTS: The bearings are used in conjunction with the carbon gear shafts and transmission gears. The idler gear, spur gear, and counter gears are supported by these carbon gear shafts. These shafts have a outer diameter of 5mm.

M03/04/05/06 stalen lichtgewicht assen (Hol)

Specificaties en functies:

• 5x40mm holle as x 1st.
• 5x21mm holle as x 1st.
• Compatibel met M-03, M-04, M-05, en M-06 chassis.

Tamiya nummer: 54319

M-06/05/Pro RC Titan Coated Sus Ball Shaft (Front) 2pcs

These suspension shafts have a titanium coating to improve durability and reduce their susceptibility to scratches from sand and dust. They ensure that your suspension stays as smooth as silk.
Specifications:
- Front Titanium Coated Suspension Ball Shaft x2
- E-ring x2
- Can be used on M-05 and M-06 chassis front suspension arm parts.

Tamiya nummer: 54583

This aluminum counter shaft replaces the stock steel shaft found in the M-07 Concept&39;s gearbox. At 2.8 grams, this aluminum shaft weighs 1.5g less than the kit standard steel part (MA18), which weighs 4.3 grams.

• Aluminum Counter Shaft x1
• Compatible with the M-07 Concept chassis.

Make your M-07 Concept chassis lighter without sacrificing durability &8211; at 1.5g, this aluminum shaft weighs almost 1g less than the kit standard steel part (MA13). Combine this part with the M-07 Aluminum Counter Shaft (item 54766) for a combined weight savings of 4.3 grams.

• Aluminum Center Shaft x1
• Compatible with the M-07 Concept chassis.

TA06 Alu Deksel voor kogel-diff.

Geschikt voor M07,TA06, TA06 PRO, TA06R, XV-01, FF-03R en TRF201XM chassis.

Tamiya nummer: 54602

YEAH RACING ALU GEAR BOX JONT FOR TASMIYA M05/6/7

YEAH RACING ALU REAR HUB 2 DEG FOR TAMIYA M05

YEAH RACING ALU SERVO MOUNT VOOR TAMIYA  M05

YEAH RACING CARBON SHOK TOWER REAR VOOR M05

YEAH RACING CARBON FRONT SCHOK TOWER 3MM VOOR M05

M05-28/WO GRAPHITE UPPER DECK FOR M05

demperbrughouder achter alu M05L

This wheel axle and axle ring set offers smoother rotation for less power loss. It removes potential problems caused by loose parts that were used in the previous generation of axle shafts that used a set screw to hold the pin in place. These parts can be fitted to the swing shaft in your existing universal shaft set.

• Wheel Axle for use with axle ring x2
• Axle Ring x2
• Can be used on M-Chassis, TT-02, DT-03 and DF-03 chassis cars fitted with universal shafts - use in place of wheel axle in Items 53597, 53791 or 53792.
• Can be used as a direct replacement for Item 53497 or 53681.

Description:

This is an optional Yeah Racing Product Aluminum Axles, and intended for use with Tamiya M05 and M06. This product machined from aluminum and light weight.

Feature:

• For: Tamiya M05 M06
• Material: Aluminum
• Color: Blue

Include:

• Aluminum Axles (2 pcs)

Description:

• These are lighter king pins which are perfect replacement to the stock version which are made from steel

Feature:

• Material: Steel & Aluminum
• Color: Blue

Include:

• Aluminum King Pin (4 pcs)

Description:

• These are the Yeah Racing Aluminum King Pin For M05, M06. These are lighter king pins which are perfect replacement to the stock version which are made from Aluminum





 
•  
•  
•  

Feature:

• For :Tamiya M05 M06
• Material: Aluminum
• Color: Blue

Include:

• Aluminum King Pin (4 pcs)

  Description:

• These are the Yeah Racing Aluminum King Pin For M05, M06. These are lighter king pins which are perfect replacement to the stock version which are made from Aluminum
•  

  Feature:

• For :Tamiya M05 M06
• Material: Aluminum
• Color: Blue
•  

  Include:

• Aluminum King Pin (4 pcs)

CARSON 1:8 OFF-ROAD BAND VELG SET 2ST ZWART

LRP Buggy 1/10, Kamikaze 4WD pre-glued front J-Compound

1/8 Banden op velg gelijmd FY-8-10 (2St)

Diameter 115mm

Carson nummer: 405288

900075, Carson, 1/8 Buggy Banden/velgenset zwart

Band-Ø: 110 mm
Breedte: 43 mm
Velgenmeenemer: 17mm
2 stuk

Carson nummer: 900075

Carson Onroad 1/8 Wegbanden -500900117 met 17 mm wielmeenemer en passend op Truggy en Buggy

900062, Carson, 1/8 Strandbanden op velg gelijmd (2St.)

Diameter 115mm

Carson nummer: 900062

MOUNTED TARMAC BUSTER RIB TIRE – HPI4742

MOUNTED TARMAC BUSTER RIB TIRE M COMPOUND (REAR)

Heavy Duty Wheel Bead Lock Rings (Silver/2pcs)

Carson Selection Wheels 2x CY-Ch. Carson 205427

THUNDER TIGER PD7334 1/10 Stadium Truck Front Tyres 2.2

This listing is for a pair of our IMEX 2.2 Skull N Bones tires with open cell foams.

• • Size: 4.75 x 2.45" (120 x 62mm)
  • Sidewall: 1.25" (32mm)
  • Inside Rim Diameter: 2.2"
  • Weight: 4.1oz (118g)
  • Included: (x2) IMEX 2.2 Skull N Bones Tires

IMEX 7575 2.2 CLAW DAWD TIRES
PAST OP:
STAMPEDE-RUSTLER -RC-10T-NITRO RUSH-NITRO MT-ALL2.2 RIMS