SkyRC Q200 Ac/dc Quattro Balance Charger/discharger, Sk-100104-08

Productinformatie "SkyRC Q200 Neo LiPo 1-6s 10A 200W AC Charger"

De Q200neo biedt, net als zijn voorganger, vier keer zoveel prestaties met verbazingwekkende kracht en precisie. Om dit te bereiken, bevat de moderne indigokleurige behuizing hoogwaardige componenten die een DC-laadvermogen van maximaal 400W kunnen bereiken - uiteraard verdeeld over de vier kanalen van de oplader. Dit vertaalt zich naar 100W per kanaal, waardoor lithium-, nikkel- en loodzuurbatterijen onafhankelijk kunnen worden opgeladen. In AC-modus levert hij nog steeds een indrukwekkend totaalvermogen van 200W.

Naast de verschillende laadmodi voor verschillende soorten accu's is deze lader ook in staat om accu's veilig en snel te ontladen. De dagen van het 's nachts ontladen van batterijen zijn voorbij, omdat het ontlaadvermogen van 25 W de vereiste tijd verkort van ongeveer 6,5 uur tot gemiddeld 1,5 uur. Dit is alleen mogelijk omdat het ontlaadvermogen meer dan twee keer zo efficiënt is als de klassieke Q200.
Om deze technologie zo gebruiksvriendelijk mogelijk te maken, gebruikt de Q200neo hetzelfde nieuwe besturingssysteem als andere huidige SkyRC-laders. Grote pictogrammen, verschillende kleuren en duidelijke tekst - deze en andere visuele functies maken het gebruik van deze oplader gemakkelijk te begrijpen. Voor degenen die nog steeds de voorkeur geven aan computerbesturing, is de gratis "Charger Master" -software beschikbaar. En zelfs via smartphone kan de Q200neo gemakkelijk worden bediend dankzij ingebouwde Bluetooth en de app "."

Of u nu een ervaren professional of een gepassioneerde hobbyist bent, de Q200neo zorgt ervoor dat uw batterijen altijd klaar zijn voor spannende RC-avonturen. Zeg vaarwel tegen onnodige downtime en ontgrendel het onbegrensde potentieel met de SkyRC Q200neo-oplader

Functies:

• Veel krachtiger dan de Q200
• Groot LCD-kleurenscherm
• Re-peak modus voor NiMH/NiCd batterijen
• Ook ideaal voor het bewaken en meten van batterijen
• PC-communicatie: USB-aansluiting voor pc-bediening en firmware-upgrade
• Smart Phone bediening & display met ingebouwde Bluetooth module
  Extra smartphones met de optioneel verkrijgbare PD3.0

Programmatuur:

• Charge Master-software (pc)
• SkyCharger-app (smartphone)

Technische specificaties:

SKYRC S60 Professional Charger/Discharger - SK-100106-01

SkyRC S60 AC Professional Charger/Discharger stands out for its exquisite and stylish design. It can charge nearly all current battery types in the market, including new generation LiPo battery with end voltage 4.35V. What's more, users could set the terminal voltage by themselves and connect it to PC for PC control and firmware upgrade.

Specifications Input Voltage AC100-240V
Charge Circuit Power Max. 60W
Discharge Circuit Power 10W
Charge Current Range 0.1-6A
Discharge Current Range 0.1-2A
Current Drain for Balancing Port Max 200mA/cell
Trickle Charging Current 50mA-300mA & OFF
LiPo / LiFe / Lilon / LiHV Battery Cell Count 2-4S
NiMH/NiCd Battery Cell Count 6-8S
Pb Battery Voltage 6-12V
Net Weight 310g

  Charge Master V2.02 Software

SkyRC S65neo AC LiPo 2-4s 10A 65W Discharger 2A 10W

The SkyRC S65neo is an AC charger and discharger that fits in one hand at 84 x 84 x 45.3 mm and 200 g, yet delivers 65 W of charging power at up to 10 A charge current. It runs straight from the mains at 100 to 240 V, so no separate power supply is required.

It charges LiPo, LiHV, Li-ion and LiFe with 2 to 4 cells, NiMH and NiCd with 6 to 8 cells and Pb batteries with 3 or 6 cells (6 or 12 V). The pack connects to the XT60 main port, the balance lead to the balance port next to it, and a dedicated socket for the temperature sensor sits on the same side.

Ten amps from a housing this size

At up to 10 A of charge current a pack is ready again considerably sooner than on a 6 A charger. This is made possible by a synchronous rectification circuit that raises efficiency and reduces waste heat. Main output and balance port monitor every single cell while charging; balance current is 500 mA maximum.

Charge, discharge, cycle, store

Lithium packs can be run in Balance Charge, Charge, Storage and Discharge, NiMH and NiCd additionally in Re-Peak and the cycle programs Cycle_C_D and Cycle_D_C, which run one to three charge/discharge passes to refresh a pack. Pb batteries are charged normally, as AGM or in cold charge mode. Discharging runs at 0.1 to 2 A; because the balance port works alongside the main output, the charger reaches up to 10 W of discharge power.

Internal resistance and Battery Meter

The Battery Meter shows total pack voltage, individual cell voltages and internal resistance – useful for spotting a fading pack before it shows up in a race.

ColorX interface, six menu languages

The ColorX interface with its light cyan and green colour scheme and responsive Web2.0 menu is operated with three buttons. Menu languages are English, German, French, Spanish, Chinese and Japanese, with English as the factory setting. A temperature sensor adjusts fan speed to load and temperature, and firmware updates run over the Type-C port using the SkyRC Charger Master PC software.

Power supply mode for RC accessories

The S65neo can output an adjustable DC voltage of 6 to 17 V at 0.5 to 9 A. SkyRC explicitly intends this as a supplementary output for RC accessories such as a pit light, tyre warmer or tyre sander: capacitive loads such as chargers or power supplies must not be connected, and batteries are not to be charged in DC mode.

Features

• 65 W charging power, charge current up to 10 A
• Discharging at 0.1 to 2 A, up to 10 W via main output and balance port
• XT60 main port, balance port and temperature sensor socket
• Working modes: Balance Charge, Charge, Storage and Discharge (lithium), Charge, Re-Peak, Cycle_C_D, Cycle_D_C and Discharge (NiMH/NiCd), Normal, AGM Charge, Cold Charge and Discharge (Pb)
• Battery Meter for total voltage, individual cells and internal resistance
• Adjustable DC power supply, 6 to 17 V at 0.5 to 9 A
• Synchronous rectification for high efficiency and low heat generation
• ColorX colour interface with selectable menu language
• Temperature-controlled fan
• Protections: automatic charge current limit, capacity and time limit, over-temperature, over-current, short circuit, reverse polarity, flame-retardant chassis
• Firmware updates over Type-C with SkyRC Charger Master

Technical Data

Scope of Delivery

• 1x SkyRC S65neo charger
• 1x AC power cord
• 1x instruction manual

SKYRC T100 Charger

SkyRC T1000 Maestro Charger
Specifications
Size and Weight

Case Material: Plastic
Case Size: 190.3*153.5*100mm
Weight: 1370g
Display
Display Type: Color X
Power
DC Input Voltage: 10-30V
AC Input Voltage : 100-240V

Charger power:
AC: 450W MAX
DC: 1000W MAX

Discharge power:
Main port: 10W
Balance port: 37W MAX
External discharge: 350W MAX

Battery
Battery Types/Cells:
LiPo/LiHV/LiFe/LiIon: 1-6cells
NiMH/NiCd: 4-15cells
Pb: 3S/6S/12S

Charge and Discharge
Charge current
LiPo/LiFe/LiIon/LiHV/NiMH/NiCd/Pb：0.1-20.0A
Parallel：20.0-35.0A
Discharge current
LiPo/LiFe/LiIon/LiHV/NiMH/NiCd/Pb：0.1-2.0A
External discharge：0.1-40.0A²
Balance current
LiPo/LiFe/LiIon/LiHV：1.5A MAX
Operation
LiPo/LiFe/LiIon/LiHV: Balance, Charge, Discharge, Storage, Parallel
NiMH/NiCd: Charge, Cycle, Re-peak, Discharge
Pb: Normal, AGM Charge, Cold Charge, Discharge

SkyRC T120 Pico AC LiPo 2-4s 6A 2x60W Charger

The SkyRC T120 Pico is an AC charger with two fully independent charging circuits: two batteries of different chemistries can be charged at the same time, each with its own settings. Measuring 90 x 70 x 106 mm and weighing 355 g, it delivers 60 W per channel – 120 W of charging power in total – at up to 6 A charge current.

Both channels carry their XT60 output and balance socket on the front panel, so batteries are plugged in from the front. The charger handles LiPo, LiHV, Li-ion and LiFe with 2 to 4 cells, NiMH and NiCd with 6 to 8 cells and Pb batteries with 3 or 6 cells – the latter with an AGM mode and a cold charge mode for low temperatures alongside normal charging.

Precise control, down to every cell

Charging is governed by an Arm Cortex-M3 processor that keeps the selected values stable even under full load. Main output and balance port work together and monitor the voltage of every single cell throughout the charging process; balance current is 500 mA maximum.

Measure internal resistance on the charger

The Battery Meter function measures total pack voltage, individual cell voltages and internal resistance. During charging a press of the plus button is enough to scroll through the internal resistance of each cell – a quick way to judge the condition of a pack.

ColorX interface, six menu languages

The T120 Pico is operated through the ColorX interface with its light cyan and green colour scheme and responsive Web2.0 menu: plus, enter and minus buttons plus a dedicated channel button to switch between A and B. The menu language can be set to English, German, French, Spanish, Chinese or Japanese, with English as the factory setting. A temperature sensor adjusts fan speed to load and temperature, keeping the charger quiet at low currents. Firmware updates run over the USB-C port using the SkyRC Charger Master PC software.

Power supply mode for RC accessories

Each port can output an adjustable DC voltage of 6 to 17 V at 0.5 to 6 A. SkyRC explicitly intends this as a supplementary output for RC accessories such as a pit light, tyre warmer or tyre sander: capacitive loads such as chargers or power supplies must not be connected, and batteries are not to be charged in DC mode.

Features

• Two independent charging circuits at 60 W each, 120 W in total
• Charge current up to 6 A, balance current up to 500 mA
• XT60 output and balance socket per channel, accessible from the front
• Working modes: Balance Charge, Charge and Storage (lithium), Charge and Re-Peak (NiMH/NiCd), Normal, AGM Charge and Cold Charge (Pb)
• Battery Meter for total voltage, individual cells and internal resistance
• Adjustable DC power supply, 6 to 17 V and 0.5 to 6 A per port
• ColorX colour interface with selectable menu language
• Temperature-controlled fan
• Adjustable safety cut-off by time and capacity, switchable trickle charge, float mode for Pb batteries
• Protections: short circuit, reverse polarity, over-voltage, overload, over-temperature, capacity and time limit, flame-retardant chassis
• Firmware updates over USB-C with SkyRC Charger Master

Technical Data

Scope of Delivery

• 1x SkyRC T120 Pico charger
• 1x power cord
• 1x instruction manual

SkyRC T200 Charger, Sk-100155-02

T-Work's Gens ace Imars Dual Screen Protector

ToolkitRC ADP750 Powersupply 12V 62A 750W

The ToolkitRC ADP750 is a powerful 12V power supply with up to 750W output power. It is specially designed for charging setups in the RC sector, offers seven outputs (including 3× XT60) and is ideal for powering an M8D charger at full capacity. Thanks to intelligent fan control and comprehensive protection features, it operates reliably and safely.

Features:

• 750W at 12V; up to 62.5A continuous current
• 7 outputs: 3× XT60, 2× 4mm banana socket sets, 1× USB-A, 1× USB-C
• Perfectly compatible with ToolkitRC M8D for full charging performance
• IC-controlled fan with automatic speed adjustment
• Multiple protection features: short-circuit, overcurrent, overtemperature, overload, and overvoltage protection
• Wide-range input 100240V AC (worldwide use)

Technical Data:

ToolkitRC M8D LiPo 1-8S 30A Duo Charger DC 10-49V

The M8D charger with a flipable touchscreen is a powerful and compact 2-channel charger for, among other things, up to 8S lithium batteries. With a total of 1600W and 50A charging current in synchronized mode, it ensures that batteries are reliably supplied with the energy they need. In addition, it has a 65W fast charging function that can achieve useable results even in a short time.

The new UI design, which is used for the first time on the M8D and is based on the user interface of real cars, makes operation via the touchscreen as simple and intuitive as possible. In the settings menu, for example, there are mostly sliders and on/off switches, while charging can be controlled using the buttons in the main screen. The display itself is optimized to clearly display the most important information of both channels. In addition to the attractive UI design, the function for destroying a battery is also new. This feature ensures that used batteries can be disposed of safely and compliantly at the end of the process.

Features:

• Up to 1600W charging power and a maximum of 50A charging current
• Max. 800W discharge power
• 2 channels and quick charge function
• Flipable 3.5'' touchscreen with a 480x320px resolution
• Easy-to-use user interface
• Includes USB-C port
• Various security features

Technical Specifications:

Delivery:

• 1x M8D charger
• 1x USB-C cable
• 1x XT90 input cable
• 1x Screen protector
• 1x Manual

Traxxas 2S (1X 2843X 7.4V LiPO& 1X 2970GX ID charger

Traxxas 3S set (1X 2849X 11.1V LiPo & 1X 2970G ID charger

Traxxas Battery/charger Completer Pack (includes #2970 Id Charger (1), #2872x 5000mah 11.1v 3-cell 25c Lipo Id Battery (1))

Traxxas Battery/charger Completer Pack (includes #2973 Dual Id Charger (1), #2890x 6700mah 14.8v 4-cell 25c Lipo Battery (2))

Battery/Charger Completer Pack (Includes #2981 ID Charger (1), #2890X 6700Mah 14.8V 4-Cell 25C Lipo Battery (1)

Traxxas Battery/charger Completer Pack (includes #2985 Charger (1), #2872x 5000mah 11.1v 3-cell 25c Lipo Id Battery (1))

Traxxas Battery/charger Completer Pack (includes #2985 Usb-c Nimh/lipo Id Charger (1), #2827x 3000mah 7.4v 2-cell 20c Lipo Id Ba

TRAXXAS BATTERY/CHARGER COMPLETER PACK 2969 CHARGER AND 2923X BATTERY

Traxxas Charger, Ez-peak Live, Charger Lipo/nimhwith Id Auto Bat Eu