Aerox Touring Car Body Rear Stiffeners

Aerox Touring Car Body Rear Stiffeners

Introducing these Touring Car body stiffeners from Aerox.

Designed to improve the the bodyshells stiffness and therefore it's form at high speeds, these stiffeners are ideal when using the new Ultra Light Weight bodyshells.

With Centre of Gravity in mind, these have been designed to be as light as possible.  Weighing in at just 1.1g (without tape) for the rear.

Side stiffeners are also available AX035.

Important: In some cases super glue such as CR522 must be used to fix the Carbon Rods into the brackets. This is best achieved after installation onto the bodyshell.

Supplied with double sided tape.

Aerox Touring Car Body Side Stiffeners

Aerox Touring Car Body Side Stiffeners

Introducing these Touring Car body stiffeners from Aerox.

Designed to improve the the bodyshells stiffness and therefore it's form at high speeds, these stiffeners are ideal when using the new Ultra Light Weight bodyshells.

With Centre of Gravity in mind, these have been designed to be as light as possible. Weighing in at just 1.3g (without tape) for the sides.

Rear stiffeners are also available AX036.

Important: In some cases super glue such as CR522 must be used to fix the Carbon Rods into the brackets. This is best achieved after installation onto the bodyshell.

Supplied with double sided tape.

Aerox Trident Wing LD3 - 1.0mm Clear

Aerox Trident Wing LD3 - 1.0mm Clear

The kit wing for the Cougar LD3 the Trident is suitable for all 1/10th 2WD and 4WD buggies.

1.0mm thick.

6.5 inch wide the Trident is a great all rounder.

Made from polycarbonate and supplied clear.

After-Run Oil 60ml

After-Run Oil 60ml
de olie die je gebruikt na het rijden voor een nito motor

Air filter (complete with rubber base & foam insert), TRX4060

Air filter (complete with rubber base & foam insert), TRX4060

Air filter (foam insert only), TRX4061

Air filter (foam insert only), TRX4061

Air Filter 1:8 Star Shape absima

Aktivatorspray 300ml

Aktivatorspray 300ml

Sekondenlijm is in enkele sekonden hard.
Ideaal om zeer snel te bouwen.

Artikel nummer: 806062

EAN: 4080606200000

ALLOY CASTOR POINTER - MI9 (PR)

This castor gauge set is used to accurately set castor on the Mi9 when using kit upper links. This is not required with the fixed
castor type upper wishbone found on the Mi9 ‘Upper wishbone conversion.’

It will work with Arrowmax 4d system, Arrowmax Black and Gold, Arrowmax silver system and new and old Hudy systems.

ALLOY OFFSET SERVO ARM 25T - FUTABA

Black Alloy Servo Arms from CORE RC. Available in the popular 23T and 25T splines these alloy offset servo arms are ideal for a variety of vehicles and should be very popular for the Mi5evo for those who want to square up the servo/electronics installation.

 

Multi position pick up and with lightweight clamping screw.

Multi hole positions, 16mm, 19mm, 22mm and 25mm.

Alu 7075 T6 wheel hubs offset +1.50mm 1:10 (2)ABSIMA

● Absima sticker sheet
 

Alu 7075 T6 wheel hubs offset +2.00mm 1:10 (2)ABSIMA

● Absima sticker sheet
 

Alu High-Speed Brushless Fan (Motor 30*30mm) 28.000RPM Item no.: 2310051

Alu High-Speed Brushless Fan (Motor 30*30mm) 28.000RPM

Item no.:  2310051

High-speed aluminum fan in a classy design.
The fan's aluminum housing ensures optimum heat dissipation to prevent the speed controller from overheating. The fan's brushless motor provides up to 28,000 rpm (8.4V) - values that can never be achieved with a coreless motor.
 
SPECS:

• T6 Aluminum
• Brushless Motor
• Silicon Cable
• Reverse Polarity Protected
• Plug: JST / BEC 2Pin for RX/Bat. connection
• Wire Length: 180mm
• Speed: 28.000RPM
• Input Voltage: 5-8.4V (2S LiPo)
• Current: 0.6A
• Color: Black Housing with Silver Cuttings
• Installation hole spacing: 25mm
• Size: 30 x 30 x 10mm
• Weight: 15g

Alu wheel hubs 12 HEX offset 6MM ORANGE 4STUKS

Alu wheel hubs 12 HEX offset 7MM BLAUW 4STUKS
INCL BOGING

Alu wheel hubs 12 HEX offset 7MM BLAUW 4STUKS

Aluminium Tool voor Band Dynamische Balanceren 12Mm/17Mm Adapter Voor 1/10 1/8

super mooie tool om te kijken of je onbalans in je wielen heb en deze mooi stil te kunnen maken.
Materiaal: metaal aluminium
adapter 12mm 17mm
Toepassing op alle 12mm 17mm hex  banden

Aluminium Wing Washers 11.5mm - Black/Gold (pr)

Aluminium Wing Washers 11.5mm - Black/Gold (pr)

Black and Gold wing washers from MonkeyKingRC. Small 11.5mm diameter and very lightweight. Gives the modern lightweight wings more support. Neat and cool look.

Aluminium Wing Washers 11.5mm - Black/Green (pr)

Aluminium Wing Washers 11.5mm - Black/Green (pr)

Black and Green wing washers from MonkeyKingRC. Small 11.5mm diameter and very lightweight. Gives the modern lightweight wings more support. Neat and cool look.

Aluminum Clamping Servo Horn Black (25T, 31mm)

Aluminum Clamping Servo Horn Black (25T, 31mm)

Aluminum Heatsink Bullet Plug Heads (2) absima

Aluminum Heatsink Bullet Plug Heads (2)

These high-gip heatsink caps are used on the one hand to prevent polarity reversal due to the colored anodized caps and on the other hand to minimize losses due to heating connectors. Due to the non-slip surface, the connectors can be firmly and securely plugged into the battery and also removed accordingly well.
 
Features:

• Material: Aluminum
• Screwable
• Serve as miniature heat sink

Scope of delivery:

• 2 screwable heatsink caps (red & black)