NEW

Matrix 1/10 EP 36R Rubber Tire Pre-glued 4pcs Asphalt - EPA036

TAMIYA TC-01 A Parts (Body Mounts) (2) - 51661

TC-01 A Parts (Body Mounts) (2)

TAMIYA TC-01 B Parts (Bumper) (1) - 51662

These are the C/D spare parts for the TC-01 chassis. They feature suspension arm, knuckle and rocker arm components among other useful spares.

TAMIYA TC-01 C/D Parts Suspension (2) - 51663

These are the C/D spare parts for the TC-01 chassis. They feature suspension arm, knuckle and rocker arm components among other useful spares.

TAMIYA TC-01 Universal Propeller Shaft (1Set) - 54975

TAMIYA TC-01 Universal Propeller Shaft (1Set)

ABSIMA Tamiya female battery plug to T-plug (Deans) male plug - 3040022

Tamiya female battery plug to T-plug (Deans) male plug

Ride Instant Glue Spot Nozzles - RI-RP-201

Ride Instant Glue Spot Nozzles

TAMIYA 1/10 RC Subarua BRZ R&D Sport 2014 TT-02 - 58578

1/10 RC Subarua BRZ R&D Sport 2014 (TT- 02)

Hoofdkenmerken:

• Wielblokken met de vorm van een remschijf geven het chassis een zeer realistisch uiterlijk.
• Onafhankelijke ophanging uitgevoerd met dubbele draagarmen, olie-dempers en L/R identieke draagarmen en uprights voor gemakkelijke montage en onderhoud.
• Zowel de motor als de accu zijn in de lengterichting geplaatst in het ABS-kunststof chassis voor een uitstekende balans.
• Montage van de uprights kan aangepast worden om 4 mm extra grondspeling te verkrijgen voor rally racing.

Specificaties & kenmerken:

• Schaal: 1/10
• Constructie type: bouwkit
• Gebruik: on- road
• Aandrijving: 4-WD
• Aandrijfsysteem: tandwieloverbrenging
• Aandrijflijn: as
• Differentieel type: tandwiel
• Ophanging: onafhankelijk opgehangen
• Stuurmechanisme: stuurhevel
• Schokdemper: olie gevulde demper
• Materiaal schokdemper: kunststof
• Type band: rubber
• Type profiel: slick
• Body materiaal: polycarbonaat (lexaan)
• Materiaal chassis: kunststof
• Elektronische snelheidsregelaar (ESC): inbegrepen
• ESC type: TBLE-02S
• Ledvoorbereid: nee
• Ledverlichting: nee
• Motor: 540 borsteltype Torque Tuned Motor
• Lagers: kunststof glijlagers
• Instelbaar camber: vast
• Instelbaar toe-in: alleen voor
• Instelbare grondspeling: ja
• Instelbare overbrengingsverhouding: ja
• Instelbare wielbasis: ja
• Instelbare breedte: ja
• Instelbare schokdemperpositie: ja
• Special feature 1: Stickerset en raammaskers inbegrepen.

Benodigd: 7,2 V rijaccu & lader
Benodigd: 2-kanaals zenderset

SkyRC LED Pit Light (Black) - 600089-01

The SkyRC LED Pit Light features convenient touch sensitive controls with three color temperature modes and six adjustable brightness / dimming levels.

Incorporating 32 high-powered LED’s using around 11 watts power, the LED Pit Light provides clean, stress-free lighting equivalent to a 100 watt incandescent bulb. The LED technology eliminates the harsh whites of florescent lighting and high-heat commonly associated with close proximity lighting.With an elegant, stylish, foldable and rotatable design, the adjustable joints can be placed in almost any position without tightening or loosening knobs or screws, simply move the light to where you need and the lamp will hold to form.

Specifications
DC Power Cable Input Voltage
6-15V
USB Cable Input Voltage
5V/2.1A
Max Power
11 Watts
Brightness
180-600 Lumens, 5 steps
Color Temperature
3000K, 3500K, 4000K
Dimension
281x60x314.5mm
Weight
460g

TAMIYA 1:10 Land Rover Defender 90 CC-01 - 58657

Een andere grote naam sluit zich aan bij de RC wereld van Tamiya namelijk de Land Rover Defender. De Defender is een afstammeling van de originele Land Rover-auto's die voor het eerst werden uitgebracht kort na WW0II. Het model recreëert een vroege versie van de Defender 90 (kortere wielbasisvariant).

De Defender 90 wordt geleverd inclusief een lichtunit (T53909)!!!!

Modelgegevens:
- Bouwkit schaal 1/10.
- Lengte: 457mm
- Breedte: 200 mm
- Hoogte: 214 mm
- Wielbasis: 242 mm.
- De klassieke Defender 90-vorm wordt nauwkeurig weergegeven door de polycarbonaat body, met oog voor veel details.
- Inclusief extra gegoten onderdelen zoals radiator, zijspiegels, schijnwerpers en spatborden
- Compatibel met 5 mm diameter LED's (wit) x2 voor koplampen en 5 mm diameter LED's x6 voor de achterzijde.
- Mat verchroomde wielen met banden met een authentiek loopvlakpatroon.
- Zeer betrouwbaar CC-01 chassis (4WD-systeem) en dubbel wishbones aan de voorzijde
- Achter 4-link vaste ophanging (pendelas met diff.)
- uitgerust met 4 CVA oliedempers.
- Een uitgebreid assortiment optionparts is beschikbaar om het CC-01-chassis aan te passen naar je persoonlijke wensen.
- ESC: TBLE-02S
- TLU-01: Ja
- Zender: Nee
- Ontvanger: Nee
- Servo: Nee
- Motor: ype 540
- Batterij en oplader: Nee
- LED: Ja

ABSIMA 7.4V 800mAh Battery Li-ion - AB30-DJ03

ABSIMA 7.4V 800mAh Li-Lion battery
For Absima 1/16 scale RC cars

ABSIMA 7.4V 500mAh Li-Lion battery - AB30-DJ02

ABSIMA 7.4V 500mAh Li-Lion battery
For Absima 1/16 scale RC cars

Hobbywing XeRun XR Pro Elite Electric Blue G2 HW - 30112612

What comes in the box?
All editions come with

• XR10 PRO ESC G2 w/ a cooling fan
• 13AWG wires for flexible layout / lightweight
• (2) Input wires & (3) Output wires 
• (2) x cooling fan (comes with one back-up fan)
• Dual capacitors
• Decals
• Bonus parts: heat tubes, double tape, nylon cable zap traps

Edition package schedule

Edition package (P/N | SKU)	Electric  Blue (30112612)
Color
Wires	13 AWG (racing)
Secondary Extended power switch	Option (Not included)

Features:

• Upgraded 32-bit M4 microprocessors with more powerful processing capability guarantee stable control and rapid response. (Industry's highest 32-bit microprocessor, increased processing speed by X4)
• Peak current up to 1200A. (this is not a typo)
• Built-in switch mode BEC with a maximum output of 10A and voltage adjustable from 5V to 7.4V (step: 0.1V) for usage with servos & other devices require different voltages.
• Variable frequency regulation of PWM & brake frequencies allows users to precisely regulate the driving; braking forces (of the motors).
• Expanded range of the max. brake force brings in the active brake ranges from 101% to 150%.
• Softening function (HOBBYWING-initiated) for milder or wilder driving control and better driving efficiency.
• 10 select-to-use profiles applicable to all 1/10th RC car racing.
• Internal electronic key switch for long service life, high reliability; and the external switch port for connecting an external switch (included in the product box) is applicable to different situations.
• Separate PRG/FAN port is able to power an external fan to maximize cooling performance or connect an LCD program box or WiFi module to the ESC.
• With the New WIFI express module (purchase separately), users are able to program parameters, upgrade firmware and check relevant data during the event using either the iPhone or Android devices.
• Switchable motor direction (CCW/CW) for various chassis.
• Multiple protections come in standard
  • low-voltage cutoff protection
  • ESC and motor thermal protection
  • Fail-safe (throttle signal loss protection)
  • Reverse polarity protection*
• Data logging for recording the maximum ESC/motor temperature, motor speed/RPM, and others in real-time.
• Firmware upgrade via Hobbywing multifunction LCD program box or WiFi Express (item sold separately).

* The external standard cap pack will still be damaged if battery reversal occurs. For full protection, recommend using HOBBYWING SMT-MLCC capacitor banks (purchase separately)

Specifications

ID	XR10 PRO G2 ESC - ELITE edition
p/n	30112610 (Passion-Red) | 30112611 (Midnight Silver) 30112612 (Electric Blue)
Application	Brushless motor system for 1/10th, 1/12th Touring Cars & Buggies Racing, Splashproof
Cont./Peak Current	160A/1200A
Input Voltage	2S LiPo/5-6 Cell NiMH
BEC Output	5V-7.4V
Wires & Connectors	Elite edition: 13AWG 200mm
Programming device	LCD program box WiFi Express Module (available through Firmware update)
Firmware	LCD Program box via USB software (PC only) OTA available by WiFi Express (iOS / Android) - coming soon
Size & Weight	37.5X30.9X32.5mm
Weight	95g
Motor spec recommendation	1/10th Touring Car≥4.5T 1/10th Buggy ≥ 5.5T 3650 Motor

SkyRC BD250 Battery Discharger/Analyzer - 600123-01

SIMPLE, ROBUST AND POWERFUL

Upgraded from BD200, BD250 is not only a powerful discharging device but also a precise measurement tool for battery capacity. It takes the guesswork out of choosing the good-performance battery for your application. BD250 offers a maximum of 250 Watts/35 Amps to discharge your battery and will test virtually any battery type or size, any chemistry cells. It's stylish but small with a high-performance cooling system and uses MOSFETS from the well-known IXYS, to make sure it can discharge at 250 watts continuously.

Specifications

The BD250 is a powerful discharging device that allows the user to discharge a battery at up to 35 amps or 250 watts and also measures and compares the performance of batteries. BD250 allows for the precise measurement of battery capacity and takes the guesswork out of choosing the best battery for your application.
Size and Weight
Dimension: 136.6x104.8x107mm
Weight: 879g
Power
Accepted Voltage Range: 5.40-35.00V
Low Voltage Alert: <5.2V
High Voltage Alert: >35V Max.
Discharge Power: 250W
Discharge
Discharge Current Range: 0.01A-35.00A
Discharge Power: 250W
Display
Current Consumption in Sleep Mode: <100uA
Capacity Display Accuracy: ±3%

Current Display Accuracy:
0.01-10.00A ±60mA
10.00-35.00A ±3%
Voltage Display Accuracy:
5.4-10V <80mV
10-20V <120mV
20-35V <160mV

ABSIMA Scale 1:16 4WD High Speed Sand Buggy 2,4GHz Black/Red - 16005

• Water-resistant Electronic
• Incl. Car Battery and USB Charging Cable 
• Incl. LED Headlights 

GENERAL CHASSIS FEATURES:

• 1/16th Scale
• 4WD
• Complete Ball Bearing
• 1.8kg Steering Servo
• Front & Rear Differentials
• Differential gears and motor pinion made from metal
• Shocks with Aluminum Caps
• High Performance Motor and Speed Controller
• CVD Drive Shafts 
• Range aprox. 60m
• Drive Time: aprox. 12 Minutes
• Aluminum Cardan Shafts 
• Adjustable Speed on the Radio
• Overheat Protection 
• Incl. LED Headlights
• Incl. 2.4 GHz Radio System
• Full printed Body
• Overcharge & Over-discharge Protection 
• 500mAh Li-Ion Car Battery

TECHNICAL SPECIFICATION:

• Measure: (L/W/H): 270 x 235 x 130 mm
• Weight : 730g
• Wheelbase: 175 mm
• Chassis Clearance: 45 mm
• Track Width: 190 mm front/rear
• Wheel Design: Monster Rubber / 5 Double Spoke Rims
• Tire Width: 45 mm
• Reifen Ø: ± 80 mm
• Shock Oil Viscosity : n.a.
• Shock Spring Force: Medium
• Shock Instalation Length: 65 mm front/rear

SCOPE OF DELIVERY: 

• 1/16th RC Car 
• 2.4 GHz Radio System 
• Car Battery
• USB Charging Cable
• LED Headligths
• Manual

REQUIRED ACCESSORIES:

• 3 AA Cells for Radio

MON-TECH YSOT TOURING BODY 190mm - 019-018L

The Mon-Tech YSOT Touring body it is a new high-downforce CT body, developed with last hign standard request.
It is available in two versions, Standard version (78gr) and "La Leggera" version (62gr).
The kit includes the masks for the windows, the decals and the wing fixing screws.
The Mon-Tech YSOT body is EFRA approved.

Tamiya PS20 Fluo RED 100ml Lexaan Spray - 86020

Tamiya PS20 Fluo RED 100ml Lexaan Spray

Hiro Seiko M3x8 Titanium Hex Socket Button Head Screw (5) - 69680

Hiro Seiko M3x8 Titanium Hex Socket Button Head Screw (5) - 69680

Hiro Seiko M3x5 Titanium Hex Socket Button Head Screw (5) - 69678

Hiro Seiko M3x5 Titanium Hex Socket Button Head Screw (5) - 69678

Hiro Seiko M3x6 Titanium Hex Socket Button Head Screw (5) - 69679

Hiro Seiko M3x6 Titanium Hex Socket Button Head Screw (5) - 69679

TAMIYA 1/10 RC Ford Zakspeed T.Capri Würth TT02 - 58578

1/10 RC Ford Zakspeed T.Capri Würth TT02

Hoofdkenmerken:

• Wielblokken met de vorm van een remschijf geven het chassis een zeer realistisch uiterlijk.
• Onafhankelijke ophanging uitgevoerd met dubbele draagarmen, frictiedempers en L/R identieke draagarmen en uprights voor gemakkelijke montage en onderhoud.
• Zowel de motor als de accu zijn in de lengterichting geplaatst in het ABS-kunststof chassis voor een uitstekende balans.
• Montage van de uprights kan aangepast worden om 4 mm extra grondspeling te verkrijgen voor rally racing.

Specificaties & kenmerken:

• Schaal: 1/10
• Constructie type: bouwkit
• Gebruik: on- road
• Aandrijving: 4-WD
• Aandrijfsysteem: tandwieloverbrenging
• Aandrijflijn: as
• Differentieel type: tandwiel
• Ophanging: onafhankelijk opgehangen
• Stuurmechanisme: stuurhevel
• Schokdemper: frictiedemper
• Materiaal schokdemper: kunststof
• Type band: rubber
• Type profiel: slick
• Body materiaal: polycarbonaat (lexaan)
• Materiaal chassis: kunststof
• Elektronische snelheidsregelaar (ESC): inbegrepen
• ESC type: TEU-105BK
• Ledvoorbereid: ja
• Ledverlichting: nee
• Motor: 540 borsteltype
• Lagers: kunststof glijlagers
• Instelbaar camber: vast
• Instelbaar toe-in: alleen voor
• Instelbare grondspeling: ja
• Instelbare overbrengingsverhouding: ja
• Instelbare wielbasis: ja
• Instelbare breedte: ja
• Instelbare schokdemperpositie: ja
• Special feature 1: Stickerset en raammaskers inbegrepen.
• Special feature 2: Model uitgerust met 24 mm spaakvelgen in zilverkleur.
• Special feature 3: Speciaal vormgegeven voor- en achterlicht units inbegrepen die uitgerust kunnen worden met apart verkrijgbare leds.
• Special feature 4: Kies tussen 257 mm of 251 mm wielbasis.
• Special feature 5: Grondspeling kan vergroot worden met 4 mm door de montage van de uprights te veranderen (rally set- up).
• Special feature 6: Geleverd met motormount die geschikt is voor 380 formaat motoren voor beginnende rijders.
• Special feature 7: Geschikt voor rechthoekige rijaccu's.
• Special feature 8: Wigvormig chassis om grondcontact tijdens snelle bochten te minimaliseren.
• Special feature 9: Schijfvormige wielblokken voor realistisch uiterlijk.
• Special feature 10: Symmetrische draagarmen voor gemakkelijke montage en onderhoud.

Benodigd: 7,2 V rijaccu & lader
Benodigd: 2-kanaals zenderset

Tamiya nummer: 58578

Sweep EXP EVO-R3 PRO Pre-Glued Touring Car Rubber Tires (36deg·4pcs) - EXP-36R3PGX

Out door asphalt
EXP-R2 series tires
IFMAR controlled tires and AOC 2016 controlled tires.
 
EXP-36R2PG  15 degree to 35 degree air temperature

Sweep EXO EVO-R Pro - 36 Shore - Touring Car Tires - Preglued (4pcs) - EXP-36R2PG

Out door asphalt
EXP-R2 series tires
IFMAR controlled tires and AOC 2016 controlled tires.
 
EXP-36R2PG  15 degree to 35 degree air temperature

ABSIMA Energy Starter Set - 4200001

ABSIMA LiPo 7.4V-30C 4200 Hardcase (TAM) - 4140004

Battery type: LiPo
Hard Case
Capacity: 4200mAh
C-rate: 30C
Plug system: Tamiya
Balancer plug system: XH
Voltage: 7.4V
Dimension: 137x46x24mm
Weight: 219g

ABSIMA Charger "CUBE 2.0" NiMH/LiPo - 4000033

• Input voltage: 100-240V AC
• Charging current: 1.0A / 3.0A / 5.0A (50W)
• Charging output: 4mm sockets
• LED for battery type identification and status
• LiPo/LiFe batteries: 2-3S
• NiMH/NiCd: 1-8 cells
• Balancing current: 350mAh
• Delta-peak sensitive
• Internal power suply
• Dimmension: 110x109x49 mm
• Weight: 490 g

   
SCOPE OF DELIVERY:

• Cube 2.0 Charger
• AC power cable
• LiPo/LiFe balancing board
• Charging cable with T-plug
• Charging cable with Tamiya plug
• Manual

ABSIMA 1:10 EP Monster Truck "AMT3.4" 4WD - 12224

Fast and powerful, the new Hotshot 3.4 series is equipped with a powerful brushed electric motor, with heat sink, and waterproof electronic speed controller (ESC). Ready to run out of the box (EU & UK version only). Shaft driven 4WD provides you with the necessary traction to maneuver the toughest obstacles and the forward/reverse ESC is beneficial in navigating tight spots. Lightweight plastic chassis, four oil filled adjustable coil over shocks, and independent suspension offer rock solid performance. Fear not! A 2.4GHz radio system and waterproof electronics ensure control, for those who dare to unleash the power.

HIGHLIGHTS

• 40A Brushed Waterproof Speed Controller
• Powerfull 18T 550 Motor
• 2.4GHz Radio System

     
PRODUCT FEATURES

• Waterproof 40A brushed ESC
• Select between NiMH and LiPo battery
• Ball bearing transmission
• 8 pcs. Oil filled adjustable shocks
• Gear differential front/rear
• Aluminum motor mount
• Complete covered transmission
• Adjustable turnbuckles & wishbones
• Motor heat sink
• Aero disc racing wheels
• Full printed body
• 2.4GHz radio System 
• Sticker sheet for a unique design
• Performance hop ups available!

     
TECH SPECS

• Motor Type: 18T 550 Brushed Motor
• Transmission: Forward, Brake & Reverse
• Drive System: 4 Wheel Drive
• Wheelbase: 270mm
• Ground Clearance: 55mm
• Measure (L/W/H): 425x300x200 mm
• Weight: 1850g
• Tire width: 57 mm front / 57 mm rear
• Tire Ø ± 116 mm
• Shock spring force: medium / Length: 95mm f/r
• Shock oil viscosity: 400 f/r
• Motor transmission: Pinion 17T / Gear 64T
• Pinion module: 0.6

          
MORE FEATURES:

• Speed Controller (2100002): NiMH (7.2V) & LiPo (7.4V/2S) suitable / Amps: 40A / BEC 5V/2A / Drive function: forwards/brake/reverse / Plug system: Tamiya
• Servo (2030003): 4kg steering force / 25T outdrive
• Motor (1230361): 18T / 28.000RPM / 12A / Size: 550
• Radio (2000001): 2-channel radio / 3-channel receiver / reverse / dual rate / trimming

 
SCOPE OF DELIVERY

• Monster Truck "AMT3.4" RTR - brushed version
• 2.4GHz Radio System
• Manual
• Sticker Sheet

 
REQUIRED ACCESSORIES

• Battery - Racing Pack NiMH or LiPo (up to 30C)
• Charger
• 4x AA Mignon Batteries for Radio

Carson 1/18 Micro Beast 2.4G 100% RTR - 404163

Fast and powerful, the new Hotshot 3.4 series is equipped with a powerful brushed electric motor, with heat sink, and waterproof electronic speed controller (ESC). Ready to run out of the box (EU & UK version including plug charger and battery). Shaft driven 4WD provides you with the necessary traction to maneuver the toughest obstacles and the forward/reverse ESC is beneficial in navigating tight spots. Lightweight plastic chassis, four oil filled adjustable coil over shocks, and independent suspension offer rock solid performance. Fear not! A 2.4GHz radio system and waterproof electronics ensure control, for those who dare to unleash the power.

HIGHLIGHTS

• 40A Brushed Waterproof Speed Controller
• Powerfull 15T Motor with 32.000RPM
• 2.4GHz Radio System

 
   
PRODUCT FEATURES

• Waterproof 40A brushed ESC
• Select between NiMH and LiPo battery
• Ball bearing transmission
• Oil filled adjustable shocks
• Gear differential front/rear
• Aluminum motor mount
• Complete covered transmission
• Adjustable turnbuckles & wishbones
• Motor heat sink
• Aero disc racing wheels
• Full printed body
• 2.4GHz radio System 
• Sticker sheet for a unique design
• Performance hop ups available!

     
TECH SPECS

• Motor Type: 15T 540 Brushed Motor
• Transmission: Forward, Brake & Reverse
• Drive System: 4 Wheel Drive
• Wheelbase: 270mm
• Ground Clearance: 35mm
• Measure (L/W/H): 380x255x155 mm
• Weight: 1410g
• Tire width: 33 mm front / 42 mm rear
• Tire Ø ± 88 mm
• Shock spring force: medium / Length: 85mm f/r
• Differential oil viscosity: 3.000 front /1.000 rear
• Shock oil viscosity: 400 f/r
• Motor transmission: Pinion 23T / Gear 64T
• Pinion module: 0.6

     
MORE FEATURES:

• Speed Controller (2100002): NiMH (7.2V) & LiPo (7.4V/2S) suitable / Amps: 40A / BEC 5V/2A / Drive function: forwards/brake/reverse / Plug system: Tamiya
• Servo (2030003): 4kg steering force / 25T outdrive
• Motor (1230360): 15T / 32.000RPM / 16A / Size: 540
• Radio (2000001): 2-channel radio / 3-channel receiver / reverse / dual rate / trimming

 
SCOPE OF DELIVERY

• Buggy "AB3.4" RTR - brushed version
• 2.4GHz Radio System
• Manual
• Sticker Sheet

REQUIRED ACCESSORIES

• Battery - Racing Pack NiMH or LiPo (up to 30C)
• Charger
• 4x AA Mignon Batteries for Radio

Sanwa M17 Radio + RX-493 Receiver - 101A32473A

Sanwa M17 Radio + RX-493 Receiver - 101A32473A

MIBO Aluminium High Speed Cooling Fan 30x30x10mm GOLD (BEC connector, 5-8.45V, 28000RPM) - MM-ACF30-G

MIBO Aluminium Cooling Fan GOLD made in 30x30x10mm dimension provides 28.000 RPM at voltage 5 - 8.45 V. The aluminum material not only provides the necessary strength, but also makes the fan a nice design addition to your RC car. Each fan includes also sheet of stickers (6pcs) where you can choose your favorite design of ring. Fan is designed for motor cooling.

Gravidisk 13 2.5 and 4.0mm Tungsten 6g/10g set (2x2pcs) - TGD22BW32-01

Gravidisk 13 2.5 and 4.0mm Tungsten 6g/10g set (2x2pcs)

Gravidisk 13 4.0mm Tungsten 10g (2pcs) - TGD40BW10-02

Gravidisk 13 4.0mm Tungsten 10g (2pcs)

Gravidisk 13 2.5mm Tungsten 6g (2pcs) - TGD25BW06-02

Gravidisk 13 2.5mm Tungsten 6g (2pcs)

Hiro Seiko M3x12 Titanium Hex Socket Button Head Screw (4) - 69682

Hiro Seiko M3x12 Titanium Hex Socket Button Head Screw (4)

Hiro Seiko M3x10 Titanium Hex Socket Flat Head Screw (5) - 69689

Hiro Seiko M3x10 Titanium Hex Socket Flat Head Screw (5)

XRAY ECS BB DRIVE SHAFT 53MM - SET - HUDY SPRING STEEL - 305309

XRAY ECS BB DRIVE SHAFT 53MM - SET - HUDY SPRING STEEL - 305309

XRAY ECS BB DRIVE SHAFT 52MM - SET - HUDY SPRING STEEL - 305308

XRAY ECS BB DRIVE SHAFT 52MM - SET - HUDY SPRING STEEL - 305308

XRAY SOLID AXLE ECS BB DRIVESHAFT ADAPTER - HUDY SPRING STEEL (2) - 305138

XRAY SOLID AXLE ECS BB DRIVESHAFT ADAPTER - HUDY SPRING STEEL (2) - 305138

PowerHD Storm S15 HV Low Profile Brushless Servo - PHD-S15-silver

This Digital Brushless Low Profile Servo from Power HD with the name “S15” is one of the most valuable servos on the market right now. It has all you need to drive your racecar to the win. The full machined aluminum case makes it very durable and the torque and speed of this servo is really outstanding. For the design of different cars you can choose the S15 with silver, golden or red color accents to look even better in your car! Check out the features of the S15 to see what it`s all about!

 

Features:

• Torque(6.0V): 11.5 kg-cm
• Torque(7.4V): 15.0 kg-cm
• Speed: 0.072 sec (6.0V) ¦ 0.060 sec (7.4V)
• Operating Voltage:6.0 ~ 8.4 DC Volts
• Weight: 52.0 g
• Bearing Type:Ball
• Bearing x 2
• Motor Type:Digital Brushless Motor
• Gear Type:Titan & Aluminum
• Size:41.0 x 20.0 x 26 mm
• Receiver wire: 80mm length, black, JR Connector
• Servohorn: 25 teeht (not included)

MR33 Super Glue for Rubber Tire Incl. Tip Ver.2 - MR33-SGR2

Volante Super Tire Glue (20ml) with 2 Stainless Nozzles - VT-91001

Volante’s Super Tyre Glue is the perfect alternative when looking for a precise, block-free and travel friendly solution. This premium glue includes a screw-top lid and re-sealable packet, making re-sealing the glue easy and safe for travelling to and from the track. Also included is a needle glue tip for maximum control when gluing. The Super Tyre Glue is designed especially to dry fast and ensure a secure bond between tyre and rim.

MR33 Belt Booster (100ml) - MR33-BB-01

The MR33 Belt Booster is an additive designed to obtain maximum transmission smoothness. Applied directly on the belts and pulleys, it increases their smoothness/fluidity without compromising their resistance. The MR33 Belt Booster protects and reduces the friction between rubber and plastic parts. As well the general fluidity improves making the application useful also for the Modified class.

Content: 100 ml

PROTOform V2 F1 Front Wing (Black) for 1:10 Formula 1 - 1729-03

PROTOform V2 F1 Front Wing (Black) for 1:10 Formula 1 - 1729-04

Introducing our next-generation front wing for your 1:10 F1 car, designed for versatility, drivability and unmistakable style.

The V2 F1 Front Wing features 3-way adjustability to suit any condition your track throws at you: a low-downforce option, a medium downforce with 1-element add-on winglet, or a high-downforce, 2-element add-on winglet for maximum steering feel. The tall wing endplates enhance straight-line stability and side-bite in long sweepers. Inspired by popular American open-wheel cars from the late 90s, we also incorporated additional ground clearance at the outer extremities, especially important on U.S. style high-grip carpet. A wide, flat section in the middle of the wing provides a perfect mating surface for any F1 body.

The wings are made from sleek, matte-finished, ultra-durable nylon and will fit most popular F1 cars on the market such as Xray, AE, Tamiya and Roche. They are available in Black color now, with a white option coming soon.

TAMIYA DF03 Aluminium olie geveerde demperset (4) - 53926

DF03 Aluminium olie geveerde demperset

TAMIYA TC-01 Chassis 1/10 Formula E Gen2 met certificaat - 58681

Wordt geleverd met certificaat voor deelname aan de Tamiya Cup!

This is an R/C model assembly kit depicting the GEN2 car used from 2018 in the Formula E championship, the pinnacle of electric car racing. The sleek, high-tech body with arch covered wheels is recreated in polycarbonate. Halo, mirrors and rear diffuser/bumper are separately molded components. Markings are included to recreate the Championship Livery car, and the model is based upon the shaft-driven 4WD of the TC-01 chassis.

TC-01: Seriously Low-Profile
This durable composite monocoque-frame chassis provides shaft driven 4WD from a central motor via front and rear propeller shafts, with oil filled gear differentials. 4-wheel independent double wishbone suspension employs long arms, plus inboard setups front and rear with oil shock-dampers actuated by push rods and rocker arms to allow the use of low-profile bodies. Adjust spacer width to easily alter camber, skid and toe angle settings. Both suspension arms and uprights are identical left, right, front and rear, for more efficient maintenance and pit work.
- 1/10 scale RC assembly kit.
- Length: 430mm, Width: 188mm, Height: 99mm
- Wheelbase: 257mm
- Tire Width/Diameter: 24/64mm (Front & Rear)
- Composite Monocoque-Frame Chassis
- Shaft-Driven 4WD
- Front & Rear Oil-Filled Gear Differentials
- 3-Piece Steering Tie-Rod
- Front & Rear Inboard 4-Wheel Independent Double Wishbone Suspension
- CVA Oil Dampers (Front & Rear)
- Gear Ratio = 6.56:1 (with kit 24T pinion)
- Use of different spacers allows alteration of camber, caster and toe angles for maximum freedom of setup.
- Change bumpers and body mounts to switch between formula and touring car layouts.
- The shaft-driven 4WD layout uses TB-05 design oil-filled gear differentials for smooth, efficient drive performance.
- Type 540 Brushed Motor included
- Polycarbonate body
- Halo and mirror components are molded in white ABS.
- In addition to the unique Formula E Gen2 body, this chassis is compatible with standard touring car measurement bodies. Wheelbase: 257mm.
- Stickers are included to recreate the championship car livery.
- Compatible with IFMAR standard “square-shape” dimension battery packs.
- Required to complete: 2-channel radio, steering servo, ESC, 7.2-7.4volt battery pack with compatible charge, and Tamiya PS paint for polycarbonate arts and Tamiya TS paint for ABS plastic parts.

Informatie:
- Chassis: TC-01 Formula-E
- Schaal: 1/10
- Rijden: 4WD
- Lengte: 430 mm
- Breedte: 188 mm
- Wiel diameter / breedte: 64 mm / 26 mm
- Overbrengings: 6,56: 1
- Type aandrijving: cardan

Leveringsomvang:
- Complete set zonder regelaar

TAMIYA 1/10 VW Scirocco GT24R-Line TT-01E - 58508

De Volkswagen Scirocco GT24-R-Line- model nu als een kit op basis van het Tamiya TT01-E chassis. Het Tamiya model toont de Scirocco GT24-CNG die in 2011 de 24u-race op de Nürburgring won.

leveromvang:
Kit met geïllustreerde montage- instructies

Technische details:

• TT-01 Type E chassis
• 4WD chassis met aandrijfas
• Onafhankelijke wielophanging met dubbele draagarmen
• Gesloten differentieelbox zowel voor als achter
• Afzonderlijk gegoten zijspiegels en achterspoiler
• TEU- 104BK elektronische snelheidsregelaar (niet LiPo-capable)
• Type 540 elektromotor

Technische gegevens:

• Lengte 443mm
• Breedte 188mm
• Hoogte 138mm
• Wielbasis 257mm
• Tire diameter 67mm
• Bandbreedte 27mm

TAMIYA 1/10 RC Terra Scorcher 2020 - 47442

Een legende keert terug - de Terra Scorcher is sinds 1988 een vertrouwde off-road bouwkit voor R / C-liefhebbers! Het is een welkome comeback in de vorm van deze LIMITED-EDITION-kit, met een modern chassis en enkele updates van het kleurenschema.

• 1/10 schaal RC model assemblagekit.
• De body van polycarbonaat is gekoppeld aan het 4WD-chassis dat eerder werd gebruikt op de opnieuw uitgegeven Fire Dragon (item 58403), met verdere upgrades.
• Bijgewerkte markeringsstickers behouden de smaak van het origineel uit 1988.
• Asgedreven 4WD-aandrijving zorgt voor een efficiënte en betrouwbare aandrijving via kruiskoppelingen en drievoudige tandwielverschillen in de voorste en achterste afgedichte versnellingsbakken, en versterkt door volledige kogellagers.
• De gestroomlijnde dubbele wishbone-ophanging maakt gebruik van bovenste I-armen en onderste H-armen met CVA-oliedempers. Bovenarmen zijn verstelbaar.
• Stabilisatoren voor en achter zorgen voor wendbaarheid en precisie.
• Bevat: Tamiya TBLE-02S ESC (elektronische snelheidsregeling) Geschikt voor borstelloze motoren met sensor en motoren met borstelmotor. (21.5 Turns BL motor limiet) (23 Turns geborsteld motor limiet)
• Benodigde items: 2-kanaal bestuuring, stuurservo, 7,2 volt accu met compatibele lader en Tamiya PS-verf.

TAMIYA 1/10 RC MB CLK-GTR 1997 TT-01E - 47437

1/10 RC MB CLK-GTR 1997 (TT-01E)

Technische details:
- TT-01 Type E chassis
- 4WD chassis met aandrijfas
- Onafhankelijke wielophanging met dubbele draagarmen
- Gesloten differentieelbox zowel voor als achter
- Afzonderlijk gegoten zijspiegels en achterspoiler
- TBLE-02S elektronische snelheidsregelaar (niet LiPo-capable)
- Type 540 elektromotor

Technische gegevens:
- Lengte 441mm
- Breedte 185mm
- Hoogte 145mm
- Wielbasis 257mm
- Tire diameter 67mm
- Bandbreedte 27mm

leveromvang:
Kit met geïllustreerde montage- instructies

Tamiya PS12 Zilver 100ml Lexaan Spray - 86012

Tamiya PS12 Zilver 100ml Lexaan Spray

Tamiya PS4 Blauw 100ml Lexaan Spray - 86004

Tamiya PS4 Blauw 100ml Lexaan Spray

Tamiya PS2 Rood 100ml Lexaan Spray - 86002

Tamiya PS2 Rood 100ml Lexaan Spray