Product information "Flysky FGr4D AFHDS3 Receiver 4CH"

The bidirectional FGr4D receiver is equipped with 4 channels and runs the AFHDS3 protocol. Thanks to the two built-in antennas and the compact design, there are numerous possible applications in the smallest of spaces. In addition to the four channels, the receiver also offers 5 functional interfaces that can be configured with different signal types such as i-BUS2, S.BUS, i-BUS and PPM. The FGr4D is also waterproof according to the PPX6 standard.

Technical Specifications

Product information "Flysky FGr4S AFHDS3 Receiver 4CH"

The FGr4S receiver is the ideal support when using a Flysky remote control. The receiver makes use of a technology used by several Flysky transmitters - the automatic frequency hopping digital system (short: AFHDS3). With a bidirectional transmission system via the antenna, this receiver is specially designed for the installation and output of PWM/PPM/i-BUS and S.BUS signals. All AFHDS3-capable transmitters are supported.

Technical Specifications

Product information "Flysky Noble NB4 with 2 Receiver"

With the NB4 radio remote control from FlySky, driving an RC car or boat offers as much comfort as it offers technical specifications. After all, the remote control uses the new and extremely flexible AFHDS3 protocol for transmission while being ergonomically design.

In combination with this protocol, the advantages of a wireless WS2A system and the new 2.4GHz chip, a wide variety of transmitter parameters can be set dynamically. This includes channel number, channel resolution, range, anti-interference requirements and also latency. This makes it possible to freely adjust the transmitter to Your own needs via the 3.5 inch TFT display. The real-time data exchange between the transmitter and the receiver also enables increased control over the flight model with constantly updated information on temperature and speed, for example.

Features:

• Advanced and modern radio
• Ergonomic design with turnable wheel
• Suitable for both right and left handers
• Dual Battery System
• Intelligent RF configuration
• Less than 3ms latency
• Also suited for simulators and games without using an external dongle via USB

Technical Specificatons:

Delivery:

• FlySky "NB4" Transmitter
• Reveiver: FGr4 and FGr4S
• USB data cable
• Grip shell
• Springs (S, L)
• 2x transparent protection sticker
• Manuals

Product information "Flysky Noble NB4-Pro with 2 Receiver"

The Noble Pro breaks traditional standards with new ideas and offers extensive setting options for racers, crawlers and other RC vehicles. This 18CH transmitter with 7 channel modes is ideal for any terrain and shows top performance even in the most difficult situations. In addition, the new 2CH "Extreme Mode" with a new frequency algorithm ensures unimagined performance with only little delay.

The most striking feature of the FlySky Noble Pro is the holder for smartphones and the steering wheel, the position of which can be changed so that both left and right-handers can get the best out of their vehicle all the same. Together with the comfortable shape of the handle, this is definitely an extremely ergonomic transmitter overall.

Features:

• Set consisting of over 20 parts such as transmitter, 2x receiver, case and much more
• Ideal for any off-road use, whether on-road, off-road or on the water
• 5 mixing setting options and speed segmentation for optimal adaptation to every riding requirement
• And three built-in high-performance chips for great performance
• Variety of structural personalization options (e.g. different throttle levers, springs, steering wheels, ... )
• Suitable for both right and left handers
• With 4 PWM and 8 PWM receivers as required
• Including 2 exchangeable batteries for 8 hours of action each
• Wireless charging station for convenient energy refueling
• Easy to use touch menu

Technical Specifications Transmitter:

Technical Specifications Receivers:

Delivery:

• FlySky "Noble Pro" transmitter
• Receivers: FGr4B and FGr8B
• Hard case including key
• USB data cable
• Wireless charging station
• Grip shell (XL)
• Wrist strap
• Steering wheel and sponge (L)
• 1.5mm and 2.5mm wrench
• Brake pad set
• Thread adjusting screw
• Knob
• Springs (S, L)
• Throttle (S, L, Plastic)
• Back & angle bracket
• Sticker (company logo, various)

•  Do you have any questions concerning this product?

De FlySky Noble NB4+ is een krachtige afstandsbediening met veel mogelijkheden voor RC auto en boot toepassingen.
Uitgerust met de derde generatie 2,4 GHz AFHDS-3 protocol en in combinatie met de meegeleverde FGr4B ontvanger, is de NB4+ een moderne oplossing die ook geschikt is voor gebruik in leraar-leerling situaties.
De eenvoudige bediening en duidelijke menunavigatie via het touchscreen maken het zelfs voor beginners gemakkelijk om te beginnen met het besturen van op afstand bestuurde modellen.

Kenmerken:

• Geavanceerde, moderne zender
• Uitgebreide leraar-leerling functie inbegrepen
• Ergonomisch ontwerp met draaibaar stuurwiel
• Geschikt voor rechts- en linkshandigen
• Dubbel batterijsysteem
• Intelligente RF-configuratie
• Lage latentie
• Kan ook worden gebruikt in simulaties etc. Toepassingen (standaard geactiveerd)

Technische gegevens:

Zender

• Type: 2,4GHz ISM
• Frequentieprotocol:AFHDS 3
• Kanalen:8
• RC modellen:Auto, boot
• Afstand: >300m (grond)
• Kanaalresolutie: 4096
• Batterij:- 1S / (4.2V) x 4300mAh LiPo
• - 3450mAh 18650 batterij
• Waarschuwing laag voltage: < 3.65V
• Type antenne: Externe enkele antenne
• Beeldscherm: 3,5-inch IPS aanraakscherm, resolutie 320x480px
• Oplaadinterface: USB-C
• Gegevensinterface: USB-C
• Temperatuurbereik:-10°C tot +60°C
• Vochtigheidsbereik:20% tot 95%
• Online update:Ja
• Abmessungen:131,41x115,95x190,56mm
• Gewicht:520g

OntvangerFGr4B

• PWM:4
• Type:2,4GHz ISM
• Frequentieprotocol:AFHDS 3
• Geschikte zenders:Alle zenders met AFHDS3 ondersteuning
• Antennetype: Enkele antenne
• Spanning:3.5-9V
• Gegevensinterface: PWM/PPM/i-BUS2/S.BUS/i-BUS
• Temperatuurbereik:-10°C tot +60°C
• Vochtigheidswaaier: 20% aan 95%
• Online update: Ja
• Abmessungen:17x29x16,6mm
• Gewicht: 6.4g

Omvang van de levering

• FlySky "NB4+" zender
• Ontvanger: FGr4B en kabel
• USB-gegevenskabel
• Greepschaal (S, L)
• Veren (S, L)
• Reserve gashendel
• 2x transparante beschermfolie
• Gebruiksaanwijzing

Product information "Flysky R4P ANT Receiver 4CH"

The R4P receiver is the ideal partner when using a Flysky remote control and is specially designed for the installation and output of PWM signals. Therefore it is supported by all ANT-capable transmitters.

Technical Specifications

FS Reflex X1 zenderset 2-Kanaal 2,4 GHz

- 2 regelbare kanalen
- Inclusief oplaadbus voor de akku´s in de zender
- 4-kanaals mini- ontvanger

Technische gegevens:
- Bedrijfsspanning zender 4,8-6 V
- 2,4 GHz FHSS systeem (Frequency Hopping Spread Spectrum)
- Twee traploos en volledig proportionele kanalen
- Servo reverse voor beide kanalen (omkering van de servorichting)
- Trim-functie voor gas en sturen
- Dual Rate voor beide kanalen (beperking van de servouitslag)
- Voeding van de BEC-ontvanger via een rijaccu met 4,8-7,2 V mogelijk
- Failsafe programmeerbaar
- Stekker-systeem voor Futaba en Graupner J / R
- Zender laadbaar via bus aan de zender (positief binnen)
- Batterij of accu niveau controleerbaar via LED´s op de zender.
- 4-kanaals mini-ontvanger 36x25x15 mm

leveromvang:
2-kanaals 2,4 GHz zender, 4 kanaals 2,4 GHz- ontvanger en een meertalige handleiding.

Benodigde accessoires:
Penlite´s (AA) 950060

Carson nummer: 500148

EAN: 4005299005916

Reserve ontvangers:
Artikelnummer: C501533 ontvanger van de set (500148).
Artikelnummer: C501534 ontvanger waterdicht.

Hiro Seiko Steering Sponge (Big)

Specifications:

Optional LiPo battery for the SANWA M17 radio. 6000mah compared to the standard 2500mah supplied in the radio.

Specifications:

KoPropo Steering Sponge