There are no products in your shopping cart yet.
Servos
Loading...
MR33 Verlengkabel RX 150mm incl. JR Plug - Zwart
Praktische verlengkabel voor servo's of controllers met de normale, gemeenschappelijke JR-connector. Als de originele kabel te kort is en je niets wilt solderen, zijn deze kabels van MR33 de perfecte oplossing!
Verkrijgbaar in lengtes van 50mm, 75mm, 100mm, 125mm, 150mm, 175mm en 200mm!
MR33 Verlengkabel RX 175mm incl. JR Plug - Zwart
Praktische verlengkabel voor servo's of controllers met de normale, gemeenschappelijke JR-connector. Als de originele kabel te kort is en je niets wilt solderen, zijn deze kabels van MR33 de perfecte oplossing!
Verkrijgbaar in lengtes van 50mm, 75mm, 100mm, 125mm, 150mm, 175mm en 200mm!
MR33 Verlengkabel RX 200mm incl. JR Plug - Zwart
Praktische verlengkabel voor servo's of controllers met de normale, gemeenschappelijke JR-connector. Als de originele kabel te kort is en je niets wilt solderen, zijn deze kabels van MR33 de perfecte oplossing!
Verkrijgbaar in lengtes van 50mm, 75mm, 100mm, 125mm, 150mm, 175mm en 200mm!
MR33 Verlengkabel RX 75mm incl. JR Plug - Zwart
Praktische verlengkabel voor servo's of controllers met de normale, gemeenschappelijke JR-connector. Als de originele kabel te kort is en je niets wilt solderen, zijn deze kabels van MR33 de perfecte oplossing!
Verkrijgbaar in lengtes van 50mm, 75mm, 100mm, 125mm, 150mm, 175mm en 200mm!
Power D12 Reverse Receiver Wire Low Profile (0.059s/12.5kg/7.4V) Coreless Servo
It features an all-aluminium case and distinctive laser pattern on the bottom, durable titanium and steel gears, a powerful coreless motor and it pulls up to 12.5kg-cm of torque at a speed of 0.059s, weighs only 55g, support SSR mode.
With receiver wire leaving the case on the opposite side of the output gear–and thus on the inside of the chassis in most cases – wiring can be carried out much neater compared to standard servos that always have the wire on the “outside” of the chassis. Therefore the servo is the ideal choice especially for 1/10th touring cars and drift cars, as it make for more tidy and safer wiring.
Specifications:
Torque | 9.5 kg-cm (131.9 oz/in) (6.0V) 12.5 kg-cm (173.6 oz/in) (7.4V) |
Speed | 0.068 sec (6.0V) 0.059 sec (7.4V) |
Operating Voltage | 6.0 ~ 7.4 DC Volts |
Bearing Type | Ball Bearing x 2 |
Motor Type | Coreless Motor |
Gear Type | Titanium & Steel |
Operating Temperature | -20℃~60℃ |
Working Frequence | 1520μs / 333hz |
Weight | 55.0g (1.94 oz) |
Dimensions | 41.0 x 20.0 x 26.3 mm (1.61 x 0.79 x 1.04 in) |
Power D15 Low Profile Programmable (0.085s/18.0kg/8.4V) Coreless Servo (Black)
Torque(6.0V): 13.5 kg-cm ( 187.5 oz/in)
(7.4V): 16.5 kg-cm ( 229.1 oz/in)
(8.4V): 18.0 kg-cm ( 250.0 oz/in)Speed0.10 sec (6.0V)
0.095 sec (7.4V)
0.085 sec (8.4V)Operating Voltage6.0 ~ 8.4 DC VoltsWeight55.0 g (1.94 oz)Bearing TypeBall Bearing x 2Motor TypeCoreless MotorGear TypeTitanium & SteelOperating Temperature-20℃~60℃Working frequence1520μs / 333hzSize41.0 x 20.0 x 26.3 mm (1.61 x 0.79 x 1.04 in)
POWER HD 1812MG SERVO
Specificaties Power HD PHD-LW-13MG
- Trekkracht 4,8V: 16 kg-cm
- Trekkracht 6,0V: 18 kg-cm
- Snelheid 4,8V: 0,14 sec.
- Snelheid 6,0V: 0,12 sec
- Voltage: 4,8-6,0V
- Gewicht: 56 gram
- Kogellager: 2x
- Motor type: DC motor
- Tandwielen: Koper / Aluminium
- Frequentie: 1520μs/333hz
- Afmetingen: 40,7 x 20,5 x 39,5 mm
- Waterproof
POWER HD 9001MG ANALOGE SERVO
Beschrijving
- Torque(4.8V): 8.6 kg-cm (119.4 oz/in)
- Torque(6.0V): 9.8 kg-cm (136.1 oz/in)
- Speed: 0.16 sec (4.8V) │ 0.14 sec (6.0V)
- Operating Voltage:4.8 ~ 6.0 DC Volts
- Weight: 56.0 g (1.98 oz)
- Bearing Type:Ball Bearing x 2
- Motor Type:DC Motor
- Gear Type:Copper
- Operating Temperature:-20℃~60℃
- Working frequence:1520μs / 50hz
- Size:40.7 x 20.5 x 39.5 mm ( 1.60 x 0.81 x 1.56 in)
Power HD Black-Silver Colour S25 Servo
The new S25 servo from Power HD is a true multi talent and is perfect to use in a lot of different racing classes. The brushless servo is very strong and reliable and manufactured in the well-known Power HD quality! The S25 is the servo of choice when you need a very fast steering servo for your car!
Features:
- Torque (6.0V): 21.5 kg-cm (298.6 oz/in)
- Torque (7.4V): 25.0 kg-cm (347.2 oz/in)
- Torque (8.4V): 30.0 kg-cm (416.6 oz/in)
- Speed: 0.075 sec (6.0V) ¦ 0.060 sec (7.4V) ¦
- Speed: 0.055 sec (8.4V)
- Operating Voltage: 6.0 ~ 8.4 DC Volts
- Weight: 75.0 g (2.65 oz)
- Bearing Type: Ball Bearing x 2
- Motor Type: Brushless Motor
- Gear Type: Titanium & Steel
- Operating Temperature: -20°~60°
- Working frequence: 1520µs / 333hz
- Size: 40.7 x 20.5 x 38.6mm
- Servohorn: 25 teeth
Power HD GTS-3 Low Profile (0.055s/30.0kg/8.4V) Brushless Servo
Specifications:
Torque | (6.0V): 20.0 kg-cm / (277.7 oz/in) (7.4V): 26.0 kg-cm / (361.1 oz/in) (8.4V): 30.0 kg-cm / (416.6 oz/in) |
Speed | 0.083 sec (6.0V) 0.067 sec (7.4V) 0.055 sec (8.4V) |
Operating Voltage | 6.0 ~ 8.4 DC Volts |
Weight | 63 g (2.22 oz) |
Bearing Type | Ball Bearing x 2 |
Motor Type | Brushless Motor |
Gear Type | 7075+Steel |
Max Current | 4.0A |
Operating Temperature | -20℃~60℃ |
Working Frequency | 1520μs / 1666hz |
Size | 41.0 x 20.0 x 29.0 mm (1.61 x 0.79 x 1.14 in) |
Power HD LW-25MG Crawler Alu Waterproof (0.14s/25.0kg/8.4V) Servo Ideal for Traxxas TRX-4
Power HD have introduced their budget-friendly new waterproof HV servo LW-25MG. It makes use of a CNC-machined all-alloy case for improved durability, newly wiring outlet structure for enhanced waterproof function, having 36CM wire to compatible with Traxxas TRX-4 wiring.
It is usable with 6.0V to 8.4V input, offer a torque of up to 25kg-cm at a speed of down to 0.14s.
Specifications:
Torque | (6.0V): 23.0 kg-cm (319.4 oz/in) (7.4V): 25.0 kg-cm (347.2 oz/in) |
Speed | 0.16 sec (6.0V) 0.14 sec (7.4V) |
Operating Voltage | 6.0 ~ 8.4 DC Volts |
Weight | 72 g (2.54 oz) |
Bearing Type | Ball Bearing x 2 |
Motor Type | DC Motor |
Gear Type | Copper & Aluminum |
Operating Temperature | -20℃~60℃ |
Working frequence | 1520μs / 333hz |
Size | 40.7 x 20.5 x 38.6 mm ( 1.60 x 0.81 x 1.52 in) |
POWER HD LW-30MG
Specificaties Power HD LW30MG
- Trekkracht 4,8V: 18,0 kg
- Trekkracht 6,0V: 23,5 kg
- Trekkracht 7,2V: 30,0 kg
- Snelheid 4,8V: 0,18 sec.
- Snelheid 6,0V: 0,16 sec
- Snelheid 7,2V: 0,14 sec
- Voltage: 4,8-7,2V
- Gewicht: 62 gram
- Kogellager: 2x
- Motor type: DC motor
- Tandwielen: Koper / Aluminium
- Frequentie: 1520μs/333hz
- Afmetingen: 40,5 x 20,5 x 39,3 mm
- Waterproof